Electricity Distribution Sub-Division-I Under Electricity Distribution Division-Baturth, Meerut, Mrs. Manju Devi Wife Of Shri Surjit Singh, In The Work Area Of ​​Medical, Completed In Development Block Machhra In Village Kasampur, In The Work Area Of ​​Du, meerut-Uttar Pradesh

Electricity Distribution Sub-Division-I Under Electricity Distribution Division-Baturth, Meerut, Mrs. Manju Devi Wife Of Shri Surjit Singh, In The Work Area Of ​​Medical, Completed In Development Block Machhra In Village Kasampur, In The Work Area Of ​​Durgapusham Colony And Subdivision-Ii, Kithore. Works Covered Under Deposit Scheme.= 1 Carriage Of Following Material From Store Center Meerut To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :- 2 Pcc Pole 8.5 Mtr Long 3 Stp Pole 11 Mtr. Long. 4 100 Kva T / F 5 Acsr Weasel Conductor 6 3X120 Sqmm 11Kv Xlpe Cable 7 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire , Jointing Kit, Earthing Set, Holding Clamp, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 8 Erection Of Stp Pole 11 Mtr Long After Digging A Pit Of Sie 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Grouting & Back Filling Of Te Pole With Proper Ramming After Completio Of Work. 9 Febrication And Fixing Of All 11 Kv H.T / L.T Line Accessories. 10 Erection Of Doubel Pole On Pcc Pole 8.5 Mtr Digging Of Pit Of Required Size Including Grouting & Fabrication And Fixing Of Top Channel, Droper Channel & Base Channel Alongwith, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators And Making Connection Properly. 11 Fabrication And Fixing Of Ms Angle And Ms Channel, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators On D / P Pole. 12 Mounting Of 100 Kva T / F With Proper Jumpering Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 13 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 14 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.6 Mtr Deep And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 15 Laying Lifting Stringing & Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 16 Laying Of Acsr Weasel Cable Of Various Size Including Fixing Of All Acsr Weasel On Support 17 Laying Of Xlpe Ab Cable Of Various Size Including Fixing Oflt Accessories On Support ( 3X120 ) Sq.Mm 18 Earthing Of Each 11 Kv Line Pole & T / F Properly After Drive Of Electrodes If Size 20Mm X 250 Mm And Connection The Earthing Point With Gi Wire. 19 Guarding Of Line With G.I Wire Having 2 No. Horizontal Wire & 3 Mtr Distance Of Swg G.I Wire After Fabrication Of Guard Cross Arms Of & Fixing The Same In Supports. 20 Providing & Fixing Ms Nut Bolt, J Hook, Holding Clamp, Danger Board, Dead End Clamp, Percing Clamp, Box Clamp 21 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	15-Mar-2024	DATE-EXTEND-ETN0-209	Date	16-03-2024

INR 1180 /-

Refer document

INR 1 Lakhs /-

Name of Work: fo|qr forj.k [k.M&prqFkZ] esjB ds vUrxZr fo|qr forj.k mi[k.M& izFke] esfMdy ds dk;Z {ks= es Jherh eatw nsoh iRuh Jh lqjthr flag nqxkZiqje dkyksuh ,ao mi[k.M&f}rh;] fdBkSj ds dk;Z {ks= es xzke dkleiqj es fodkl [k.M ekNjk es iw.kZ tek ;kstuk ds vUrxZr vkus okys dk;ZA

Sl. No.	Item Description
1	Carriage of following material from store center Meerut to site of work including loading & unloading at both ends maximum distance up to 40 Km. :-
2	PCC Pole 8.5 Mtr Long
3	STP Pole 11 Mtr. Long.
4	100 KVA T/F
5	ACSR Weasel Conductor
6	3x120 sqmm 11KV XLPE Cable
7	Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire , Jointing Kit, Earthing Set, Holding Clamp, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.
8	Erection of STP Pole 11 mtr long after digging a pit of sie 1.20 x 0.60 x 1.6 mtr in all type of Soil including grouting & back filling of te pole with proper ramming after completio of work.
9	Febrication and fixing of all 11 KV H.T/L.T line accessories.
10	Erection of Doubel pole on PCC pole 8.5 mtr digging of pit of required size including grouting & fabrication and fixing of Top channel, droper channel & base channel alongwith, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators and making connection properly.
11	Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators on D/P Pole.
12	Mounting of 100 KVA T/F with proper jumpering of HT side and fixing of cable on LT side of T/F.
13	Making a section pole to exist pole after fabrication & fixing of T channel fixing of all 11 KV accessories.
14	Erection of stay rod complete after digging a pit of size 1.6 mtr deep and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.
15	Laying lifting stringing & proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.
16	Laying of ACSR Weasel Cable of various size including fixing of all ACSR Weasel on support
17	Laying of XLPE AB Cable of various size including fixing ofLT accessories on support(3x120)sq.mm
18	Earthing of each 11 KV line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire.
19	Guarding of Line with G.I wire having 2 no. horizontal wire & 3 mtr distance of SWG G.I wire after fabrication of guard cross arms of & fixing the same in supports.
20	Providing & fixing MS Nut Bolt, J Hook, Holding Clamp, Danger Board, Dead End Clamp, Percing Clamp, Box Clamp
21	Cutting & chopping tree branches near side of line for making the clearance between line and tree.