Military Engineer Services-MES has published Tender For Special Repair To Bldg No T 26 Of Corps Camp Additional/Alternator To Bldg No T 75 In M Zone Bldg No T 10 And T 11 In C Zone Under Br I At Rms. Submission Date for this Tender is 01-04-2024. Building Work Tenders in Shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Mar-2024 | AMENDMENT IN BOQ FOR SPL REPAIR TO BLDG NO T 26 OF CORPS CAMP ADDN ALT TO BLDG NO T 75 IN M ZONE BLDG NO T 10 AND T 11 IN C ZONE UNDER BR I AT RMS | BOQ | 25-03-2024 |
| 2 | 16-Mar-2024 | AMENDMENT FOR SPL REPAIR TO BLDG NO T 26 OF CORPS CAMP ADDN ALT TO BLDG NO T 75 IN M ZONE BLDG NO T 10 AND T 11 IN C ZONE UNDER BR I AT RMS | Other | 25-03-2024 |
| 3 | 25-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering. |
| 2 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 3 | Dismantling of mild steel work of any discription all as specified and directed |
| 4 | Dismantling, floor, hearth or wall tiling including cement mortar bedding complete. |
| 5 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar. |
| 6 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level. |
| 7 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete |
| 8 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames. |
| 9 | All as per item 8 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 10 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as specified |
| 11 | All as per item No but refixing of PPGI sheeting and labour only all as specified and directed |
| 12 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 13 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified. |
| 14 | M&L 25 mm thk PCC 1:2:4 type B-1 using20mm graded agg as in leveling course . |
| 15 | S&F vitrified floor tiles light shade of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement |
| 16 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat. |
| 17 | S&F for rolled section as in main and cross beams , purlins , rafters where connected to common rafter and running rails etc conforming to Fe- 410-w |
| 18 | All as per item No but febrication, erection and fixing only all as specified and directed |
| 19 | M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm. |
| 20 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW. |
| 21 | S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | S&F polythene film, 150 micron thick laid on a coat of bitumen primer, @0.30 to 0.50 kg per Sq.m all as specified and directed. |
| 23 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 24 | S&Ffor providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19,aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall be provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Halco extrusions etc all as listed.Note:- Glazing and Stainless steel wire mesh will be paid seperately. |
| 25 | S&F aluminium anodised grill with mesh size 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc, aluminium section 15 micron thick anodizing complete all as specified and directed. |
| 26 | S&F aluminium partition of specified aluminium section top rail and middle rail 2.36 Kg/RM, bottom channel 2.59 Kg/RM including aluminium beads rubber gasket and 5mm thick frosted glass in upper portion and 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing whitelamination complete all as specified and directed. |
| 27 | M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed by Engineer-in Charge. |
| 28 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane. |
| 29 | Supply and fix stainless stelel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter. |
| 30 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening. |
| 31 | S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site including nacessary fittings etc. |
| 32 | S & F 100 size stainless steel butt hinges complete all as specified and directed |
| 33 | Supply & Fixing150 mm Aluminium handles, cast type, anodised |
| 34 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 35 | S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 36 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed |
| 37 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 38 | S & F floor door stopper of aluminium alloy body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed |
| 39 | S&Ffor aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 40 | M&L for brick work with sub class "B" bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6. |
| 41 | Material & labour for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4. |
| 42 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 43 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 44 | M&L for preparation of newwooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed. |
| 45 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed |
| 46 | All as per item No 45 here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces |
| 47 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified. |
| 48 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed |
| 49 | M &L for preparation of old decorated surfaces of walls by complete removal of existing surfaces and applying two coat of oil bound distemper of approved shade/tint all as specified |
| 50 | Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge . |
| 51 | Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying one coats of cement paint including complete removal of existing surfaces all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge . |
| 52 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. |
| 53 | All as per item No 53hereinbefore but 20mm dia . |
| 54 | S&F15mm bore GI water tubing medium grade laid in floors or fixed in wall including GIfittings. |
| 55 | S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GIfittings. |
| 56 | S&F Rotational moulded polyethylene water storage tanks with cover& 20mm ball valves high pressure of PTMT with epooxy coated aluminium road & high density plastic ball(cylindrical vertical with closed top) hoisted and fixed in position incl disconecting of existing tank all as specified in SSR Part I (Capacity in litres 1000) complete all as specified and directed. |
| 57 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 58 | S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with flush pipe 32 mm dia, inlet ball valve float and handle complete all as specified . |
| 59 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 60 | S& F in repair vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete |
| 61 | S&F in repair WHB vitreous china flat back or angle back type any size, including cutting for and pinning in ends of brackets or erecting stand PVC wash pipe and PVC connection PVC 32mm dia bore waste cuppling complete. |
| 62 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 63 | S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shqanks and flynuts, screwed for iron pipe 15mm dia complete all as specified. |
| 64 | S&F in repair for600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 65 | M & L for in repair bib cock CP with wall flange, fancy type 15 mm dia bore. |
| 66 | M & L in repair angular stop cock CP with wall flange, fancy type 15 mm bore dia. |
| 67 | S&F in repair grating down 100mm dia with waste hole of PTMT (Min wt 25 gms). |
| 68 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 69 | S&F in repair PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor |
| 70 | S&F PVC (SWR) 110mm dia bends in any radius. |
| 71 | S&F in repair PVC (SWR) 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor |
| 72 | S&F PVC (SWR) 75mm dia vent cowl |
| 73 | S & F PVC (SWR) reducers 110 mm to 75 mm |
| 74 | S&F PVC (SWR) 75mm dia bend |
| 75 | S & F in repairs for 75mm bore dia pipe stack clamps out of 50 mm by 5mm flat iron & 16 mm dia round iron stays, including bolts & nuts & secuirng ends of stay to wall or roof |
| 76 | M&L for RCC Nominal Mix Type A1 1:1.5:3 (using 20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 77 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as "specified and as directed. |
| 78 | S & F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, asfixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star). |
| 79 | Supply and fixing stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make. |
| 80 | M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to IS |
| 81 | M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) |
| 82 | S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 83 | M&L for 19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework |
| 84 | Supply and fixing 0.9 mm thick decorative laminates type 1, or surface finish colour and pattern as approved by GE all as specified and directed. |
| 85 | S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed. |
| 86 | S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed. |
| 87 | S&F magnet Catcher for cub board complete all as specified and directed. |
| 88 | S & F in repairs for Draperly rod/Harrison rails of CP of 20 mm dia with fixing brackets, Stops rollers and rings etc |
| 89 | M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mmgraded stone aggregates as in plinth protection finished fair and even. |
| 90 | M & L for cement concrete type C-2,1:3:6(40mmgraded stone aggregates) as in surface channels and drains |
| 91 | M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement |
| 92 | M&L for chequered cement concrete tiles 200x200x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
