|
| 1 | 1.Construction of Annexure Library Building in Kallavi Village H/o Kallavi Estimate Amount : 22.000 Lakhs |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 mand initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 3 | Footing |
| 4 | Grade beam |
| 5 | Supply and Filling of M Sand including cost and Conveyance of all site etc. Complete. |
| 6 | Cement concrete 1:4:8 mix using 40mm metal including cost and Conveyance of all site etc. Complete. |
| 7 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle |
| 8 | Grade beam |
| 9 | Columns |
| 10 | Lintel Roof level beam beam |
| 11 | Cement concerete 1:1.5:3 using 20mm.H.B.G.jelly for all R .c.c. items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing but providing fixtureslike fanclamps |
| 12 | Foundation and Basement |
| 13 | Ground Floor |
| 14 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 15 | Brick work in cm 1:5 Mix using new country bricks including cost and Conveyance of all site etc. complete. |
| 16 | Foundation and Basement |
| 17 | Ground Floor |
| 18 | Brick partition walls using country bricks of size 83/4\"x41/4\"x23/4\" etc., complete. |
| 19 | Supplying and filling of conveyed earth with a lead of 1Km for basement filling including cost and conveyance of all materials to site etc., complete. |
| 20 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 21 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and ThreeM.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 22 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.(The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
| 23 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 24 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mmof approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 25 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 26 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 27 | UPVC -Ventilator Specification:Supplying andfixingUPVC(Un- Plasticized Polyvinyl Chloride)Louvered Ventilatorsoffromthe profile the size of outer frame60mmx58mmand shutterprofilesizeof60x 78mm both profiles are reinforcedwithGI/1mm 125GSM and 100% corrosionfree,theprofile are multi chambered sectionswithwallthickof 2mm. The EPDM rubber (black colour) covered with all over the edges of frame andshutter. The corners and joints should be weldedand cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. Thewindowshouldbe fixed to the wall with 100% packing with screws and silicon packing all round the frames.Theventilator should be got approved fromtheExecutive Engineer before use on work. M 0675 |
| 28 | UPVC-WindowSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on workM 0674 |
| 29 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 30 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of |
| 31 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete. |
| 32 | SupplyandfixingofPVC Solid Doors using 19gauge 19mm MS Sq,tubes for stylesandframes,15mm MSSq.tubesforto,Lock and bottom rails. The Steel Tubes shall be covered with5mmthickSolidPVC sheets. Shutter using 5mm thicksolidPVCsheetsfor panellingshallrigidlyfixed in positionincluding furnitureandfittings.The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mmX30mm.Theover allsizeofframesshallbe 50mm X 45mm with suitabletabate for housing the shutter etc, complete as perstandardspecification. PWD SOR Pg. No. 49 Sl.No.122 a |
| 33 | WeatheringCoursewith Concrete Broken Brick (S.I.No.278)&( P&D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jellytolimebeing\"32to 12.5wellboatedwith woodenbeatersforgiving requiredslopeand thickness as directed by the departmental officersetc., complete.-10 cum |
| 34 | Finishing the top of roof with one course of machine pressedtilesofsize200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thickmixedwithwater proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to fulldepthoftileswiththe same cement mortar mixed withredoxideandwater proofing compound including curing etc., co |
| 35 | Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. |
| 36 | Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. |
| 37 | Manufacturing,Supplying and Fixing of Stainless SteelHandrailsfor staircaseusing50mmdia 304L Grade Stainless Steel pipeof1.60mmthickat requiredlocations to a height of 900mm from finishedfloorlevelwelded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with2Nos.of25mmdia intermediate horizontal stainlesssteelpipeof 1.60mmthickinbetween. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.Therateis inclusive of the charges for cutting,bending,welding, grinding, polishing,conveyance, electrical charges, etc. complete |
| 38 | Earthing as per ISI Specification with an earth electrode of 2.1mt class \"B\" GI pipe of Dia not less than 40mm and with 20mm Dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, check nuts etc., and mansonry workhand providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers.(SD 234) |
| 39 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary \"U\" nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.(SD 75) |
| 40 | Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with walland making good of the concealed portion with earth connection. The MCBDB and MCB\"s should be with the ISI mark (like standard make)Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB\"s should be with the ISI mark (like standard make) SD 179 |
| 41 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in SD 55 rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colourconnection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wallfor mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers.(derived from SD 55) |
| 42 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wallfor mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers.(derived from SD 54) |
| 43 | Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1\" x 1/8\" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supporting T.W.reepers of 1\" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection with 7/20 PVCinsulated copper wire from EBmeter to fuse unit. SD 127) |
| 44 | Supply and run of 4 core 16 Sq.mm PVC Armoured cable of 1100 V grade with ISI mark. (ED V 1 r) |
| 45 | Supply and run of 4 core 10 Sq.mm PVC Armoured cable of 1100 V grade with ISI mark(ED V 1 q) |
| 46 | Wiring with 2 x 1.5 sqmm (22/0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 47 | Wiring with 2 x 1.5 sqmm (22/0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 |
| 48 | supply and fixing of 18W LED square type Recessed fitting with LED (Lower end) on false Ceiling with sd 529suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 49 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp (SD110) |
| 50 | Supply and fixing of 400mm Sweep-wall mount fanM1355 |
| 51 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.(D) |
| 52 | Supply and delivery and fixing of HDPE tank asper IS 12701 / 1996 including loading,unloading, transportation and labour charges forfixing of the GI pipes and specials for pipeconnection works including cutting, threadingand fixing charges etc., |
| 53 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineerbefore use on work. |
| 54 | 25mm Gun metal Gate Valve M0501 |
| 55 | 40mm Gun metal Gate Valve M0499 |
| 56 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 57 | SD Tap M0508 |
| 58 | Pillar Tap M0509 |
| 59 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works |
| 60 | 25mm dia |
| 61 | 32mm dia |
| 62 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 63 | 25mm Pipe coupler M0882 |
| 64 | 32mm Pipe coupler |
| 65 | 25mm Pipe elbow |
| 66 | 32mm Pipe elbow |
| 67 | 25mm Pipe Bend |
| 68 | 32mm Pipe Bend |
| 69 | 25mm Pipe Tee |
| 70 | 32mm Pipe Tee |
| 71 | 25mm Pipe end cap |
| 72 | 32mm Pipe end cap |
| 73 | 25 mm x 20 mm Reducer |
| 74 | 32 mm x 25 mm Reducer |
| 75 | 25 mm x 20 mm Reducer Tee |
| 76 | 32 mm x 25 mm Reducer Tee |
| 77 | 25 mm x 20 mm Reducer Elbow |
| 78 | 32 mm x 25 mm Reducer Elbow |
| 79 | 25mm Pipe Jet Nipple |
| 80 | 32mm Pipe Jet Nipple |
| 81 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 82 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 83 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 84 | Supply and delivery of Electric Monoset centrifugal pump conforming to IS 9079:2002 asamended from time to time, with CI FG 200 Casing , hydraulically and dynamically balancedBronze grade LTB-2 impeller, impeller ring and casing ring, stainless steel shaft capable ofdischarging required quantity of water against a total head noted below due to all causes.Pump shall of BEE 3 Star Rated and capable of discharging the specified quantity at thehead noted at the minimum NPSHA at site conditions. The shut off head shall be atleast25% over and above the head at duty point. The pump shall be suitable for operation in ACthree phase , 415 V+/- 10% , 50 Hz +/- 5%. Squirrel cage induction motor for continuousoperation. The speed of the Pump and Motor shall be not less than 2700 to 2900 RPMrespectively. |
| 85 | Europeon Water Closet with all fittings and 10lit capacity flusing tank |
| 86 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone M.Sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M.Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 87 | Providing rain water harvesting structure |
| 88 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 89 | Collection and supply of sand filling into the basement including cost and conveyance to the site and all labour charges. |
| 90 | Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. |
| 91 | Collection and supply offillingthe stones in soakpitincluding cost and conveyance of materials to the work site and all labour charges. |
| 92 | 40 mm metal |
| 93 | 20 mm metal |
| 94 | Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 95 | Provisions for supply and fixing of precast RCC cover slab including cost and conveyance of materials and all labour charges |
| 96 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 97 | Provision for Ramp |
| 98 | EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessarythe sites complete complying with standard specifications and as directed as per SS20B |
| 99 | CEMENT CONCRETE 1:4:8 mix using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete |
| 100 | BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications. |
| 101 | Fillling in basement with excavated earth layers of not more than 15cm thick,well rammed, watered and compacted, complying with standard specification etc., complete. |
| 102 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 103 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Using anti-skid tiles (Observed Data) |
| 104 | Provision for Septic Tank |
| 105 | Earth work excavation for foundation in all class of soils except hard rock requiring blasting but shoring shuttering and baling out water wherever necessary and refilling the sides of the foundation with excavated earth in layers of not more than 15 cm. |
| 106 | CEMENT CONCRETE 1:4:8 mix using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete |
| 107 | BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications. |
| 108 | Supplying and Errecting cenering for sides and soffits including necessary supports and strurring up to 3.29m hight for plane surface in all floors with all cross bracing using mild steel sheets of size 90x60cm and 10 gauge stiffened,welded with steel ang |
| 109 | Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS ) |
| 110 | Cement Concrete 1:1.5:3 (one cement one and half sand and three machine broken stone) using 20 mm ISS gauge machine broken HBG metal for RCC works excluding cost and (abrication otreinforcement and centerning shuttering charges but including curing and |
| 111 | Plastering with cement mortar 1:4mixto 20 mm thick includingcost and conveyance of all materials to site and all labour |
| 112 | Plastering with Cement Mortar 1:5 (one cement and five sand ) 12mm thick in all floors including mixing mortar, working in all heights curing watering with all leads and lifts for good water etc., complete complying with standard specification. |
| 113 | Towards cost supply and fixing of man hole cover 60x60 |
| 114 | Towards provision for soak pit for septic tank |
| 115 | Stucco plastering 12mm thick using blue granite chips of size 10mmand below over the existing base plastering with cement mortar 1:5, 12mm thick, etc., complete complying with standard specifications (SI 314) |
| 116 | Provision for Information board |
| 117 | ProvisionofName Board |
| 118 | Provisionof Photo Charges |
| 119 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
