Military Engineer Services-MES has published Tender For Provision Of Sewage Line Septic Tank In Robert Line Officers Accommodation And Spl Repairs To Ncos Govt Married Accommodation Building No P 126 (08 Quarters) At Imh Lines Of Eme Records Under Ge (South) Secunderabad. Submission Date for this Tender is 10-04-2024. Building Work Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-04-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sq m on plan and not exceeding 1.5 m in depth for foundation of manhole etc and getting out as in hard/dense soil complete all as specified & directed. |
| 2 | All as per item no.02 above but exceeding 1.50 mtr and n.exceeding 3.00 mtr deep complete all as specified and directed . |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out as in hard/dense soil complete all as specified & directed. |
| 4 | All as per item no.03 above but exceeding 1.50 mtr and n.exceeding 3.00 mtr deep complete all as specified and directed . |
| 5 | Material and labour for providingcement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 6 | Material and labour for brick work withbricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 7 | Material & labourfor PCC 1:3:6 Type C-2 ( using 20 mm graded stone aggregate ) as in surface channel complete all as specified and as directed . |
| 8 | Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified anddirected. |
| 9 | Material and labour for rendering 15mm thick in cement mortar (1:3) on fair faces ofbrickwork or concrete surfaces mixed with WPC finished the surface even and smooth without using extracement complete all as specified and directed. |
| 10 | Material and Labourfor rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces and surfaces finished even and fairwithoutusing extra cement complete all as specified and directed |
| 11 | Supply only integral water proofing |
| 12 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement complete all as specified and as directed . |
| 13 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and as directed . |
| 14 | Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed. |
| 15 | Removing of soil to distance n.exc 50 mtr and depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed . |
| 16 | Material and Labour for precast RCC ( 1: 2:4 ) Type B-1 ( using 20 mm graded stone aggregate ) as in manhole cover slab and set in position with cement mortar ( 1:4 ) including demolition of existing unserviceable RCC cover slab complete all as specified and as directed . |
| 17 | Material and Labour TMT bar 10mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed . |
| 18 | All as per Item No-17 above but 6 to 8 mm dia . |
| 19 | Material and Labour for 150 mm dia Reinforced concerete pipes , class NP3 , laid and jointed complete with collars complete all as specified and as directed . |
| 20 | Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe 150 mm dia including forming cradles after they are laid and tested complete all as specified & directed. |
| 21 | Cutting into existing manholes for connecting new drains of dia 150 mm including making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate )smooth finished and reforming benching as requiredcomplete all as specified and directed. |
| 22 | Labour only loose filling with old brick bats into the filter bed complete all as specified and directed . |
| 23 | Material and Labour for loose filling with broken brick aggregates of gauge 80 to 150 mm into filter bed complete all as specified and directed . |
| 24 | Demolition and breaking up of existing unserviceable SWG/pvcpipe set in cement mortar including concrete bed 150 mm complete all as specified and as directed . |
| 25 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed. |
| 26 | Demolition of cement concrete unreinforcedin ground floors and pavings nexc 15 cm thick (below or above ground level) complete all as specified and directed |
| 27 | Taking down cement plaster on brick/stone wall surface including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed . |
| 28 | De-sludging and cleaning of manhole, sludge chamber etc by manual digging out and lifiting of concentrated sludge including dewatering and cleaning , removing silt , sludge , sludge water and any othert foreign materials and depositing the same into excavated pits exceeding 1.5 m depth at places ( n.exc 50 m ) as directed by the Engr-in-chargereturning and filling in excavated earth after depositing sludge including sludge water and sprinkling bleaching powder over surrounding area and removing surplus excavated soil to nearby areascomplete all as specified and directed. (Measurement shall be made for sludge incl sludge water .) |
| 29 | Taking out of gully trap cover and CI grating and cleaning of sludges / silt from gully traps including rodings SGSW /CI pipe and gully trap to first manhole ( length n,exc 3 m ) and placing the existing CI grating , gully trap cover etc in original position including removing of rubbish / sludge outside the premises complete all as specified and directed . |
| 30 | Materials and labourfor 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand andfinished the surface fair and even complete all as specified & directed. |
| 31 | Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed. |
| 32 | Supply and fix in repair PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor all complete as specified . |
| 33 | Supply and fix in repair PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joint , fixed to walls all complete as specified and directed. . |
| 34 | Supply and fix in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified . |
| 35 | Supply and fix in repair 110 mm bore PVC (SWR) junction single "T" equal or unequal complete all as specified and as directed . |
| 36 | Supply and fix in repair 110 mm bore PVC (SWR) bend , any radius complete all as specified . |
| 37 | Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified . |
| 38 | Supply and fix in repair 75 mm bore PVC (SWR) bend , any radius complete all as specified . |
| 39 | Supply and fix in repair 75 mm bore PVC (SWR) Vent Cowl complete all as specified . |
| 40 | Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed. |
| 41 | Supply and fix in repair 150 mm bore cast iron spun soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenchescomplete all as specified and as directed . |
| 42 | Supply and fix in repair 100 mm bore CI Bends (any radius),diminishing pieces or tapers (larger bore measured)complete all as specified and as directed . |
| 43 | Supply and fix in repair 150 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchescomplete all as specified and as directed . |
| 44 | Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in one brick thick honey comb walling ,built in cement mortar (1:6) complete all as specified and as directed |
| 45 | Material and labour for RCC (1:2:4 ) Type B1 ( using 20 mm graded stone aggregate ) as in slab supported on wall including complete all as specified and as directed . |
| 46 | Material and labour for RCC (1:2:4 ) Type B1 ( using 20 mm graded stone aggregate ) as in wall complete all as specified and as directed . |
| 47 | Use and waste of formwork to soffit of suspended slabs not exceeding 200 mm thick including finish the surface rough complete all as specified . |
| 48 | Use and waste of formwork to faces of RCC vertical wall including finish the surface rough complete all as specified . |
| 49 | Material and labour for fixingTMT bar as inRungs conforming to Fe-410-W (Gde.E-250) quality-A for septic tank and manhole complete all as specified and as directed . |
| 50 | Material and labour for PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcomplete all as specified and as directed . |
| 51 | Supply and fix in repair grating doom 125mm dia of PTMT (Minimum wt 25 Gms)complete all as specified and as directed. |
| 52 | Material and labour for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed . |
| 53 | Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) includingrubbish off the premises complete all as specified and as directed. |
| 54 | M&L for 25 mm thickfor PCC (1:2:4) type B1 20 mm graded stoneaggregate as in flooring finished even and smooth complete all as specified and as directed. |
| 55 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 56 | M&L for glazed ceramiccoloured tilesin vertical surfaces size450x350x7mm thick, , set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thickplaster in CM 1:4as in skirting / dados etc complete all as specified and directed. |
| 57 | M&L Cement ConcreteChequred colour tiles 250 X 250 X 22mm/300mmx300mmx22mm jointed with grey pigment & pigmentand pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 58 | S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mmsize with PTMT nuts of length 450mm complete all as specified and directed. |
| 59 | S&F in repairsVitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and directed. |
| 60 | S&F in repairsVitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacitycomplete as directed. |
| 61 | S&F in Repairs Pillar taps fancy type , cp brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed. |
| 62 | S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 63 | S&F Stop valves, cp brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. |
| 64 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75mm complete all as specified and as directed. |
| 65 | Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed. |
| 66 | M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in paddingon roof surface averaging complete all as specified and as directed. |
| 67 | M&L for rendering 10 mm thick in CM 1:4 mixed with integral water proofing compound as per manufacture"s instructions as in roof and chajjas, finished the surface fair and even .(Note : Supply of water proofing compound will be measured and paid separately .) |
| 68 | M&L for (a)applying a coat of 85/25 bitumen based primer over the plastered surfaces @0.30Ltr/Sqm (b) Providing and laying APP based polymeric membrane of 3mm thickness of weight not less than 3.50kg/sqmon primed surfaces by means of torch application with side overlap of 100 mm both longitudinally and transversely(c) Over APP membrane applying a coat of bitumen primer of 85/25 grade @1.20Ltr/Sqm and over thissolar reflective bitumninous aluminium paint@0.20Ltr/sqmcomplete all asspecified and directed |
| 69 | M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed. . |
| 70 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of waterr based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay waterr proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .) |
| 71 | Supply only integral water proofing compound. |
| 72 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing. |
| 73 | M&L for75 mm thick PCC 1:4:8type B1 using 20mm graded aggregate as in level course on floor etc complete all as specified and as directed. |
| 74 | M&L for25 mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in level course on floor etc complete all as specified and as directed. |
| 75 | M&L for 15 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor. |
| 76 | M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match. |
| 77 | All as per item No 12 abovebut on vertical surfacesas in skirting/dado level etc. |
| 78 | M&L rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4on vertical surfaces/backing coat. |
| 79 | M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 80 | M&L for non skid colouredtiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match. |
| 81 | M&L for machine cut kota stone slab flooring 16-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 82 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description. |
| 83 | Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement |
| 84 | M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cementincl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately) |
| 85 | M&L for rendering 5 mm thick on ceiling in CM 1:3finished even and smooth without using extra cement complete all as specified and as directed. |
| 86 | M & L for complete removal of existing concrete surface / masonry surfaces and applying two coats of OBD including priming with alkali resistant primming paint over 3mm thick wall care putty and preparation of old surface complete all as specified and as directed. |
| 87 | M & L for applying two coats of OBD including priming with alkali resistant primming paint over 3mm thick wall care putty and preparation of new surface complete all as specified and as directed. |
| 88 | M&L for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etcand applying two Coats of cement base paint over a coat of primer complete all as specified. |
| 89 | M&L of applying three coat of white wash on ceilingon new plastered surfaces etc complete all as directed by Engr-in-charge. |
| 90 | M&L of complete removal of existing concrete surfaesand applying three coats of White wash on ceilingon oldplastered surfaces etc complete all as directed by Engr-in-charge. |
| 91 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 92 | Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Eachincl iron mangery complete. |
| 93 | S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified & directed. |
| 94 | S & F anodised aluminium window and ventilator shutters, slidingtype without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) complete all as specified.&directed. |
| 95 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples. compete all as specified an directed. |
| 96 | S & F sheet glass ordinary quality 4mm thick n exc 0.50sqm in each pane and glazing with oil putty/glazing clips of any description. compete all as specified an directed. |
| 97 | S&F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as directed |
| 98 | supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 99 | M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified |
| 100 | M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified |
| 101 | M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified. |
| 102 | M&L forMild Steel flat ironas in hold fast supplied and fixed including tarring complete. |
| 103 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Coping and similar work. |
| 104 | S & F 35 mm thick factory made second class hard wood,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercialveneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated |
| 105 | S &F2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) |
| 106 | M & L for preparation of new woodensurfaces of any description ,not other wise described over 10 cm width or girthapplying 2 coats of synthetic enamel paint over a coat of primers , |
| 107 | M&L for door stoper of aluminium alloy body Rubber 140 mm long |
| 108 | S & F 18/19 mm thick Prelaminated Particle Board, interior grades, prelaminated one sides with decorative choice laminated & other sides balancing white lamination, fixed to screws to timber frame work |
| 109 | S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised. |
| 110 | S&F for aluminium anodised 100mm hasp and staple, safety type, brass with mild steel hing pin incl bolt to hinge plate and fixed with screws. |
| 111 | S & F 100mm longAluminium anodisedbarrel tower bolt of extruded section . |
| 112 | S & F 150mm longAluminium anodisedbarrel tower bolt of extruded section . |
| 113 | S & F 200 mm longAluminium anodisedbarrel tower bolt of extruded section . |
| 114 | S&F 100 mm lengthAluminiumhandles fabricated type anodised |
| 115 | S&F 150 mm lengthAluminiumhandles fabricated type anodised |
| 116 | S & F 100mm size mildSteel butt hinges medium weight cold rolled. |
| 117 | S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hingepin type C 21. |
| 118 | S & F 300 mm long aluminiumalloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed . |
| 119 | S&F 300 mm ordinary mild steelrat rail rod pattern spring including roller and roller plate complete |
| 120 | S&F in repairs anodised aluminium alloy curtain rail, cromium plated with fixing brackets, stops, roller etc complete all as specified and directed. |
| 121 | Taking up or down GI tubing 15mm dia. |
| 122 | Taking up or down GI tubing 20mm dia. |
| 123 | S&F GI tubing of 15mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. |
| 124 | S&F GI tubing of 20mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. |
| 125 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed. |
| 126 | S&F in repair rotational moulded polyethylene water storage tanks 500 lts(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1. |
| 127 | S&F 20mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT. |
| 128 | S & F Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe and loud in repairs. |
| 129 | Demolition of Brickwork or stone / boulders masonry laid drybuilt in cement mortar |
| 130 | M&L brick work with subclass B bricks ,straight or curved on plan exc 6m mean redius built in cm 1;6 |
| 131 | M&L brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 |
| 132 | M&L hard core of gauge n exc 63 mmbroken stone or boulders deposited ,spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface. |
| 133 | M & L for cement concrete 1:3:6 type C-1, 75 mm thick using 20mmgraded stone aggregates as in plinth protection finished fair and even with using extra cement. |
| 134 | M&L for chequered cement concrete desiner tile 300 mm x 300 mm x 25 mm thick setjointed andpointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1;6 all as specified and directed. |
| 135 | M&L for 20 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor. |
| 136 | Material and labour polished cuddappa stone slab flooring thickness of stone slab varying from 20mm to 30 mm thick laid over 20mm thick cement screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade the slabcomplete all as specified and directed. |
| 137 | S&F in repairVitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Ltr capacity and PVC flush pipe and including provn of lime concrete bedding including CI "P" trap 100mm complete all as specified and directed. |
| 138 | S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mmsize with PTMT nuts of length 450mm complete all as specified and directed. |
| 139 | S&F in repairs vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated,screwed down, high pressure, with or with out letter "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipefancy type and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other endfixed complete all as specified and as directed |
| 140 | S&F CP Bib taps fancy typeChromium platedcast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed |
| 141 | S&FCPStop valves cast copper alloy,fancy type,with iong shank and cup,bore15mm, fixed |
| 142 | S&FCPangle valves cast copper alloy,fancy type,with iong shank and cup,bore15mm, fixed |
| 143 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete. |
| 144 | S&F600mm X450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick building board or commercial plywood and fixed to wooden pluge as in repairs. |
| 145 | S&F brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete. |
| 146 | Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) all as specified |
| 147 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 148 | S&F in repairsfor stainless steel plate rack of size 1200x900mm of approvedmake and quality complete all as specified and as directed by Engr-in-Charge. |
| 149 | S&F Sheet glass shelf assembly consisting of 5.5mm thicksheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 150 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed. |
| 151 | Dismantling of cast iron drain pipe 100 mmdia from floor/walls etc and taking out oftrenches/floors. |
| 152 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door. |
| 153 | Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out oftrenches/floors. |
| 154 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed. |
| 155 | S&F75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall. |
| 156 | S&F 75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door. |
| 157 | PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair. |
| 158 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. |
| 159 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. |
| 160 | M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for : |
| 161 | One light point controlled by one, one way switch 5A, SP |
| 162 | One ceiling / exhaust fan point controlled by one, one way switch |
| 163 | One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board |
| 164 | One 3 Pin 5 Amps switch socket Independt board |
| 165 | OneBell point controlled by one bell push |
| 166 | One light point controlled by two 2 - wayswitch 5 amps, SP |
| 167 | Description all as per item No 160 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 168 | S & F Switch pianotype single pole one way flush type 5 Amps capacity 230 volts. |
| 169 | S & FSwitch piano two way flush type 5 Amps capacity 230 volts. |
| 170 | Supply and fix switch socket combination flush type multipurpose 2/3 pin5 Amps, 230 Volts complete all as specified. |
| 171 | Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified |
| 172 | Supply and fix switch socket combination flush type multipurpose 5 in 1,5/16 Amps, 230 Volts complete all as specified. |
| 173 | S & Fix ceilingfan regulator step type AC 240 voltsuitable for 1200/1400 mm sweep. |
| 174 | S&F bell ding dong working on 230 volts AC Supply |
| 175 | S&F switch Bell push type, single pole working on 23 v AC supply. |
| 176 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. |
| 177 | S & F switch pianotype single pole one way flush type 15 Amps capacity 230 volts. |
| 178 | S&F sheet metal enclosure vertical type MCB DB TPN 4 way double door with bus bar 415 volts suitable for and including 63 Amps TPN MCCB 16 KA as incommer and 12 Outgoing SP MCB"s with magnetic locking system complete all as specified. Note: MCB SP Shall be measured and paid seperately, all as specified and directed by Engg in Charge. Make :- Havells, Legrand, Standard |
| 179 | S&F MCCB 100 Amps, 4 pole, 415 Volts adjustable type complete with extended terminals at both incoming and out going connections all as specified and directed by Engr-in-Charge. Make :- Havells, Legrand, Standard |
| 180 | S and F sheet metal enclosure MCBDB SPN 8 way with bus bar 240 Volts double door with magnetic locking system complete all as specified. |
| 181 | S & F MCB SP230V suitable for fixing on MCB DP of capacity 6 to 32 Amps complete all as specifiedand directed by Engg in Charge |
| 182 | S & F MCB SPN230Vsuitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge |
| 183 | S & F wall mounted box type LED of 20 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver completewith 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge. Make as per Crompton Cat No-IGP161LT8-16 and LT8-20-865-(2), Bajaj Cat No. BLRB-DB 118 and BLRB 20 CW LED., Havells Cat No-REGALBATTENT8UPTO1X22W SSBSWH and PHOTONULTRAE2.01213T8 SSTL20W LED865SPC |
| 184 | S&F lamp holder insulated body surface bakelite including LED lamp of 12 watt, B-22 base with back plate suitable for angle/batten fittings fixed with PVC round blocks all specified |
| 185 | S & F wall mounted LED batten of 09/10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge. Make as per Havells Cat No.-LUMILINEBS9WLED865SPCWH, Wipro Cat No- D571065, Crompton Cat No. LCTLN-10-CDL |
| 186 | S & F In replacement of old unserviceable bulk head light fittings with new LED bulk head ip 65 with prismatic diffuser 1x10 Watt white complete with all accessories internally prewired and incl connecting upthree core single wire complete all as spd and directed . Make : Bajaj cat part No. BIBWP 10W LED, Crompto Cat No-LBHP-10-CDL, Havells Cat No-EXAFT10WLED857 SSYMBOPC |
| 187 | S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. Make : Bajaj cat part No. ENXT P 24L WH CR PC SD, Crompto Cat No-LSTS-25-CDL-M, Havells Cat No-ENDURASUNDOWNSL25WLED 765PASYBOPCIHD. |
| 188 | M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge |
| 189 | M & L for Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 190 | M & L for Submain wiring with two two core 6 Sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the commonearth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 191 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipemed grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade. |
| 192 | Disconnecting and removingceiling fan of 1200/1400 mm sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants includingreassembling, includingreplacement of wornout/defective parts, capacitor 2.5 mfd capacity 240 volts, sealed ball bearing, rubber bushes and refixing in original position includingminor repairs,for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete and following items changed in place of unservericeable parts including Material and labour for rewinding of the ceiling fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer"s design and instructions including varnishing for ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire. Note: old winding material is property of the contractor |
| 193 | S & F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer in charge |
| 194 | Provn of cable TV socket outlet point including conduit 20mm dia upto 15m long to reach out the intake point |
| 195 | S & F down rods of 20mm dia including threads length complete suitable for ceiling fans of size 1200 mm sweep including clamps, nut & bolts as specified and as per site requirement. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
