Quantum Of Work For ( 1 ) G / S To Stw No 251 Dg, Connection Place Gaharauli Lalganj ( 2 ) G / S To Stw No 250 Dg, Connection Place Takhat Khera, Lalganj ( 3 ) G / S To Stw No 257 Dg, Connection Place Rahim Khra Lalganj ( 4 ) G / S To Stw No 255 Dg, Connection Placevillage Apsari Lalganj ( 5 ) G / S To Stw No 256 Dg, Connection Place Chandka Bux Lalganj ( 6 ) G / S To Stw No 253 Dg, Connection Place Singhaur Lalganj ( 7 ) Shifting Of 11 Kv Line Of M / S Manager, Bakshi Memorial Publice School Lalganj, In The Geographical Area Of Edd-Lalganjraebareli, Under Deposit Scheme In Jurisdiction Of Edd-Lalganj Raebareli.- 1 CORTAGE OF STOR ITEMS FROM ESC TRIPULA RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONGWITH LOADING UNLOADING AND PROPER STACKING:- 2 8.5 Mtr long PCC Pole. 3 16/25/63 KVA T/F,as required. 4 Loose line material including ACSR/RABBIT/AB /XLPE CABLE/ weasel / Conductor, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11KV F Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, T-Off Channel, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (2X4mm). 3200 mtr., I/D and O/D Jointing Kit, XLPE Cable 3X185 sq.mm and other remaining items. 5 ERRECTION & LABOUR CHARGES:- 6 Dismantling of PCC Pole including dragging up to patticuar place . 7 Errection of PCC Pole including dragging with Fitting of all accessories as per RESPO Norms. 8 Grouting of PCC Pole with grouting materials including digging of Pole to pit side as per RESPO Norms. 9 Errection/Re-errection of double pole by PCC Pole, then grouting of Polewith grouting materials including fitting of all accessories items, as per RESPO Norms. 10 Mounting of 16/25 /63 KVA Transformer on Double Pole with fitting of all required accessories as per RESPO norms, as required. 11 Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms 12 Laying , stringing & sagging of HT LT Lineby DOG/AAAC/ ACSRweasal / RABBITconductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required. 13 Laying of G.I. Pipe (6 inch Dia)20 Meter by(3 x 185) sq. mm XLPE Cable by digging of 1.2 mtr deep vide as per ISS including providing bricks, sand, stone slab the inter exel spacing bettween to cable shoulde be in beettween 0.25 M to 0.40 M as required at site as per RESPO Norms. G.I. Pipe Provided by Contractor. 14 Work for Installation/fixing of I/D and O/D Jointing Kit 15 Earthing of Pole as per RESPO norms. 16 Earthing of T/F body & neutral as per RESPO norms. 17 Fabrication of Line materials like V type X-arm/Top Channel/T off Channel/M.S. Channel/ M.S. Angle/Gaurding Angle and other misc work, as required, 18 Work for Installation/fixing of Holding Clamp, Material Provided by Contractor 19 Work for Installation/fixing of Stone Pad, Material Provided by Contractor 20 Work for Tighteing of Nuts &Bolt, Material Provided by Contractor 21 Work for Installation/fixing of F Clamp, Material Provided by Contractor 22 Work for Installation/fixing of 4X25mm sq. XLPE Armoured Cable, Material Provided by Contractor 23 Work for Installation/fixing of P.G. Clamp, Material Provided by Contractor
