Uttar Pradesh Projects Corporation Limited has published Tender For Medical Gas Pipe Line System Modular Operation Theater Semi Modular Operation Theater Work For Kaili Hospital Basti. Submission Date for this Tender is 12-03-2024. Medical Gas Tenders in basti Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | GAS PLANT ROOM |
| 2 | Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 3 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. |
| 5 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows |
| 6 | : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. |
| 8 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) |
| 9 | As in item 6 but for the lighterbeams i.e. havingspans upto 6 m. (Using 1:1.5:3 Mix concrete) |
| 10 | Class 150 brick work in1:6cement and coarsesandof2.25fineness modulus mortar infoundation and plinth including supply ofall materials, labourand tools and plants etc. requiredforpropercompletion of the work. |
| 11 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil |
| 12 | Class 150 brick work in1:6cement and coarsesandof2.25fineness modulus mortarin super-structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. |
| 13 | Same as in item no. 10 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 14 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 15 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand mortar |
| 16 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive.1 cement : 6 Course sand mortar |
| 17 | Making Grooves 10 to 12 mm wide x 8 mm deep in plaster of wall or in ceiling vertically or horzontly as required |
| 18 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 19 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 2 (1 cement : 2 coarse sand) :25 mm thick |
| 20 | Kota stone slabs 10 to 12 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:2 (1 cement: 2 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete |
| 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 22 | Supply and fixing 6mm (1/4") thick china white glazed tilesin flooring or in skirting or dado laid with 1:3 cement and approved course sand mortal finished with white cement slurry jointing and polished complete including supply of all materials labour T & P etc. required forpropercompletionofthe work. |
| 23 | Supply and fixing 6mm (1/4") thick china white glazed tilesin flooring or in skirting or dado laid with 1:3 cement and approved course sand mortal finished with white cement slurry jointing and polished complete including supply of all materials labour T & P etc. required forpropercompletionofthe work. |
| 24 | Supply and fixing of flush doors commercialqualityconformingtoI.S.2202 Part I (1983) includingfixingof wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks, handle, springs and other Fitting with necessary screws to be supplied departmentally.32 mm thick |
| 25 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 26 | Providing & fixing of hold fast for chaukhatsof doors and windows. |
| 27 | Providing & fixing of door / windows grill. |
| 28 | Z-Section steel windows |
| 29 | Angle iron door chaukhats .45*45*5 |
| 30 | Fixing of Door, windows/ventilators chaukhats in position. |
| 31 | (a) Door chaukhats |
| 32 | (b) Window chaukhats |
| 33 | (c) Ventilator chaukhats |
| 34 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) |
| 35 | Finishing walls with water-proof cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem, supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. (For External wall surface) |
| 36 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling) |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 38 | Providing Stainless steelsliding bolts16 mm dia with nuts and 250 mm long.(analysed) |
| 39 | ProvidingStainless steel towerboltwith10 mmdia and screw. |
| 40 | (a) 250 mm x 10mm |
| 41 | (a) 200 mm x 10mm |
| 42 | Providing Stainless steeldoorhandleswith screws 100 mm long. |
| 43 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed |
| 44 | with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 45 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 46 | Same as item 45above but on new wood surface. |
| 47 | Fixingpanesofglasswithatulor equivalent I.S.I. markedquality putty, brads and springs complete. (a) 4 mm thick |
| 48 | 15 mm cement plaster on plinth of single or half brick wall of mix :1:3 (1 cement: 3 coarse sand) |
| 49 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 50 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement |
| 51 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer |
| 52 | Construction of drain along with apron. |
| 53 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 54 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :100 mm |
| 55 | Providing and fixing collar 100 mm Sand cast iron S&S as per IS - 3989 |
| 56 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia Sand cast iron S&S as per IS - 3989 |
| 57 | Providing the trench for the proper proceeding of medical gas pipe |
| 58 | PLUMBING WORK |
| 59 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. |
| 60 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 61 | Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required . |
| 62 | Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap |
| 63 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 64 | 32 mm dia (for wash basin) |
| 65 | 40 mm dia(for sink and urinal) |
| 66 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 67 | Providing & fixing white vitreous china flat back halfstallUrinalof 580x380x350 mm with white PVC automatic flushing cistern with fittings standard size CP brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in CP brass including painting of fittings and brackets cutting & making good the walls & floors wherever required. |
| 68 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 69 | Providing and fixing soil, waste and vent pipes : |
| 70 | 100mm dia sand cast iron S & S Pipe |
| 71 | 75mm dia sand cast iron S & S pipe |
| 72 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. |
| 73 | 100 mm |
| 74 | 75 mm |
| 75 | Providing & fixing M. S. holder - bat clamps of approved design tosand Cast iron/cast iron (spun) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size). Including cost of cutting holes&making good the walls etc. |
| 76 | For 100 mm dia pipe |
| 77 | For 75 mm dia pipe |
| 78 | Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls and floors. |
| 79 | 100 mm inlet&75 mm outlet |
| 80 | Providing & fixing Sand Cast iron S & S coller |
| 81 | 100 mm dia |
| 82 | 75 mm dia |
| 83 | Providing & fixing sand cast iron S & S bend of required degree with access door insertion rubber washer 3 mm thick, bolts & nuts complete . |
| 84 | 100 mm dia |
| 85 | Providing & fixing plain sand cast iron S & S Bend of required degree. |
| 86 | 100 mm dia |
| 87 | Providing & fixing of sand cast iron terminal guard . |
| 88 | 100 mm dia |
| 89 | 75 mmdia |
| 90 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 91 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 92 | Internal work exposed on wall |
| 93 | 20mm nominal outer dia pipes |
| 94 | 32mm nominal outer dia pipes |
| 95 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 96 | 15mm nominal outer dia pipes |
| 97 | 20mm nominal outer dia pipes |
| 98 | Providing, fixing G. I. pipes complete with G. I. fittings and clamps includingcuttingandmaking good the walls etc. (internal work) - (Exposed on wall) |
| 99 | 20mm dia nominal bore |
| 100 | 25mm dia nominal bore |
| 101 | 32mm dia nominal bore |
| 102 | Painting G. I. pipesand fittingswith synthetic enamel white paint over a ready mixedpriming coat, both of approved qualityfornew work. |
| 103 | 20mm dia nominal bore |
| 104 | 25mm dia nominal bore |
| 105 | 32mm dia nominal bore |
| 106 | Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) |
| 107 | 25 mm nominal bore |
| 108 | 32 mm nominal bore |
| 109 | Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). |
| 110 | 25 mm nominal bore |
| 111 | Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. |
| 112 | Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. |
| 113 | Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. |
| 114 | Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. |
| 115 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. |
| 116 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design |
| 117 | Providing and fixing square mouthS. W. Gully trapgrade `A" complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 118 | 180 x 150 mm. size P type |
| 119 | ELECTRIFICATION WORK |
| 120 | Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in heavy gauge PVC conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 14 S.W.Gcopper earth continuity wire&piano typeswitchetc. complete in all respects. |
| 121 | Same as in item no. 1 but for fan. and light duty exhaust fan |
| 122 | Supply & fixing of power plugwith15amp 250 volts flush type switch& 3pin 15 amp 250 volts flush type socket in suitable M.S. boxof175 mm * 100mm * 50mmsizewith bakelite sheet cover 3 mm thickfixedwithbrass machine screws & washerscompletein all respect. |
| 123 | Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugePVC coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. |
| 124 | 2 x 4 sq. mm.In 20 mm dia conduit. |
| 125 | S/F of surface/flush mounting TPN distribution board without MCBcompletein all respect as directed at site by Engineer-in-charge.. |
| 126 | 4 WAYS |
| 127 | Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA) |
| 128 | Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 8SWGG.I. wirein 15 mm dia. GI pipe uptoswitch board (from apron to switch boardthecost of GI pipe & GI wire willbeextra)300mm square C.I. box with hinged cover,masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . |
| 129 | Supplying & Laying of one number 8 SWG G. I. wirein 15 mm. dia. G. I.pipefor earthing, laidin groundor inwall duly concealedincludingthecostofcement, sand, labour, T&Pandothermaterial required for proper completion ofthework as directed at site. |
| 130 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect.CAT-AAA |
| 131 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT-AA |
| 132 | Erection and testing of ceiling fan and regulator etc excluding supply of down rod, complete in all respect. |
| 133 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. |
| 134 | Making hole in the wall for exhaust fan and finishing properly complete in all respect |
| 135 | S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in lengthfabricatedfrom 16 SWG M.S. sheet incorporating with10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with redoxideand screwingarrangementwithwiringconduit laid in the R.C.C.roofbeforeconcreting along with supply of all materials,labour, T&P etc. for proper completion of work. |
| 136 | S/F of doorchimeonPolishedM.D.F.E.G. board includingmakingconnectionsetc. complete in all respects. |
| 137 | S/F of danger board fabricated from 10 gauge M.S. sheet as per E/I rules. |
| 138 | S/Fof shocktreatmentchart ( prescribed under I.E.rules ) duly framed with glass and supported from back with hard board orsoft board with supply of all material labour T & P etc for proper completion of work. |
| 139 | Supply andlayingof 1800 mm x 900 mm x 20 mm thick chequered rubber mattingof tested quality. |
| 140 | Supply of AC230/250 volts, 50 HZceiling fanwith standarddownrod, blades, 2 nos. caps etc.complete |
| 141 | (Make : Bajaj / Crompton / Havells) |
| 142 | 1400 mm sweep |
| 143 | Supply of AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting frame and other accessories etc.complete |
| 144 | (Make : Bajaj / Crompton / Havells) |
| 145 | 300 mm sweep 900 rpm |
| 146 | G.S.T. Will be paid Extra as per GST Notification |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
