National Rural Employment Programme has published Tender For Construction Of Community Building Near Durga Mandir At Village Dhova , G-P- Dhova , Block-Ramgarh Diistrict-Dumka.. Submission Date for this Tender is 14-03-2024. Building Work Tenders in dumka Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil itemA) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Earth filling infoundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earthobtainedfrom excavation offoundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.(mode of measurement compacted volume) |
| 4 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in positionspecific grade ofRCCexluding the cost of centering and shuttering all work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Providing designation 75 B brick work in C.M. (1:6) in foundation with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 11 | Providing tor steel reinforcement of 10mm,12mm,16mm, dia rods ………………..do………... and direction of E/l. 8 mm,10 mm , 12 mm dia barA-8mm dia rod |
| 12 | B-10mm dia rod |
| 13 | C-12mm,16mm dia |
| 14 | Providing designation 75A B/W in C.M (1:6) in super structure …..do…do…doall complete job. |
| 15 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 16 | Centering and shuttering including strutting proping etc and removal of form for foundation, footing, base of coulmn etc. |
| 17 | Centering and shuttering including strutting proping etc and removal of form forcoulmn etc. |
| 18 | Centering and shuttering including strutting proping etc and removal of form for lintel,beam,plinth beam etc. |
| 19 | Centering and shuttering including strutting proping etc and removal of form for roof etc. |
| 20 | Centering and shuttering including strutting proping etc and removal of form forchujja etc. |
| 21 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 22 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 23 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 24 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 25 | Providing and laying vitrified Cool Roof tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 154557-2007 / 15013006, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Its solar reflective index ( SRI )value should be above 78. complete. Size of Tile 600x600 mm x10 mm thick. Parking Tiles (industrial Tiles) |
| 26 | Providing and laying 25mm thick kotah stone tiles in risers of steps skirting and pillars of approved size texure and colour laid over 12mm thick cement mortar (1;30 and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 27 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With A Grade White Tiles |
| 28 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 29 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 31 | Providing 12 mmthick C.P (1:6) in all wall……do….do……do all complete job. |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 34 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 35 | Providing and Fixing factory made uPVC door frame made of uPVC extruded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) ,corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer"s specification and direction of Engineer-in-charge. |
| 36 | 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles &rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. |
| 37 | Providing two coat of synthetic enamel paint over a primer coat of red lead paint of approved shade and make over new steel surface…do…..do….all complete as per specification and direction of E/I. |
| 38 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 39 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 40 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (C) 450 mm long (c) With 10 lit Low LevelP.V.CCistern |
| 41 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 42 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 43 | Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l. (b) C.I. body brass spindle |
| 44 | Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 46 | 32 mm nominal outer dia .Pipes. |
| 47 | Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l (a) 20mm dia wt not less than 400 gms |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 50 | 110MM DIA |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 52 | SHOE 110MM |
| 53 | HYDT :- Cost of drilling 200mmx165mm deep bore well in all kinds of soil and rock in rural or any other area for installation of pump set with hydroulic DTHrig machine, all complete including supplying all materials, tools drilling rig and air compressor and equipment as well as fuel lubricants and cost of transportation of rig machine and other vehicles up to the site . |
| 54 | (ii) From 51-150 meter onwards. |
| 55 | Supplying all tools, tackles and lowering of 200mm dia MS ERW Casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. including all taxes. VAT, exise duty. Freight charges with inspection chargesetc. as applicable.all complete job. |
| 56 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 57 | Supplying 100mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. Supply with cable gaurd, thrust carbon/ fiber bearing to withstand entire hydrolic thrust , water proof winding shall be provided. The pump set shall be suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 metersubmersible copper conductor cable in single / double run shall be provided with each pump.(2.0HP). |
| 58 | S/F/F Starter annel Board including voltmeter , ameter, On/Off switch and provision for dry run protection as perIS Specificationfor 2 HP, Submersible Motor pump encased in painted mild steel sheet box with glass front and locking arrangement complete assembly mounted on wall all complete job as per direction of E/I. |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. (B) 32mmnominal outer dia pipes |
| 60 | Supplying of all materials,labours, tools and equipment forfiting and fixing 200mm dia MS capCover casing pipe all complete job. |
| 61 | 3 Core PVC insulated PVC sheated copper conductor flat submersible cable . Supplying flat flexible submersible cable with copper conductor PVC insulated and PVC sheathed as per IS: 7098. 3 Core 4 sq.mm. |
| 62 | Point wiring in PVC Conduit with modular switch:- Wiring for light/fan point /exhaust fan point /call bell with 1.5 sqmm .FRPVC insulated copper conductor single core cable in surface /recessed pvc conduit with modular type switch. Group C |
| 63 | Wiring for Curcuit Submain wiring along with earth wire the following sizes of pvc insulated copper conductor single core cable in surface of recessed pvc conduit as required |
| 64 | 2x2.5 sqmm+1x2.5 sqmm earth wire |
| 65 | 2x4.0 sqmm+1x4.0 sqmm earth wire |
| 66 | Supplying and fixing of following size PVC conduit along with accessories in surface/recess including cutting the wall do--do-- E/I 25mm |
| 67 | Supplying and fixing PVC/G.I box of following size on surface or recess with suitable size do--do-- E/I |
| 68 | Supplying and fixing following modular type switch socket on the eixsting modular plate and switch box.do--do--E/I 5/6 amps one way switch |
| 69 | 5/6,3pin socket outlet |
| 70 | Supplying and fixing following size /modular box along with modular base and cover plate for modular swiches do--do-- |
| 71 | 4 or 5 modular |
| 72 | 6 modular |
| 73 | Supplying and fixing 2 pin 5 amp ceilling rose do--do-- |
| 74 | Supllying and fixing batten/angle holder do--do-- |
| 75 | Supplying 1200 mm Ceilling Fan Bajaj/ Cromtion or any other approved make etc |
| 76 | Supplying and fixing MCB |
| 77 | S/F/F 25 wattL.E.D streetligh fitting complete |
| 78 | S/F/F9/10 Watt LED bulb do--do--All complete Job. |
| 79 | Carriage of Materials (i)Bricks-Lead(1US+25S) |
| 80 | (ii)Sand-Lead (1K+7S) KM |
| 81 | (iii)Stone Chips-Lead (1U+39S) KM |
| 82 | (v)(Cement +Steel)-Lead 5KM |
| 83 | Add 18% for G.S.T. |
| 84 | Labour Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
