Village Panchayat-VP has published Tender For Renovation And Upgradition Of Village Panchayat Building Including V.P.Hall On First Floor In V.P. Village Poinguinim, Canacona Goa.. Submission Date for this Tender is 16-03-2024. Building Work Tenders in canacona Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 2 | Demolishing R.B. work including stacking of steel bars & disposal of unserviceable material within 50 mts. lead.Extra for cutting reinforcement bars in R.C.C. or R.B. work |
| 3 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead |
| 4 | a) Of area 3 sq.m. and below |
| 5 | Dismantling steelwork in single sections in R.S., joists including dismembering and stacking within 50 mts. lea |
| 6 | Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead. |
| 7 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 9 | Excavation for roadway in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements on lines, grades and cross sections, and transporting to the embankement location within all lifts and lead upto 1000 m as per MORTH Specification 301 |
| 10 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 11 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 12 | a)All works upto plinth level |
| 13 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 14 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 15 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 16 | a) All works upto plinth level |
| 17 | b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 18 | c)In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases uptofloor five level |
| 19 | Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 20 | Centering & shuttering including Strutting, Propping & removal of forms for : |
| 21 | i) Foundations, Footings, Bases for columns |
| 22 | ii) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 23 | iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 24 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon |
| 25 | a) First class Indian teak wood |
| 26 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. |
| 27 | a) 40 x 3 mm flat iron hold fast 40 cm long |
| 28 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. |
| 29 | b) Ornamental grill |
| 30 | Providing and fixing 50 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws: |
| 31 | a) First class Indian teak wood |
| 32 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete |
| 33 | a)125 x 70 x 4 mm (ordinary type) |
| 34 | Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% noncombustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Labor |
| 35 | Hospitals, Offices and Commercial Buildings, Auditoriums and Cinema Hall, Educational Institutions, R&D Centers, Studios, Laborator |
| 36 | Providing and fixing bright finished brass door latch with necessary screws etc complete |
| 37 | a)300x 16 x 5 mm |
| 38 | Providing & fixing bright finished brass 100 mm. rim latch & lock & a pair of knob, with necessary screws etc. complete (Indian make of approved quality |
| 39 | Providing and fixing 300 mm long bright finished brass chain with hooks for fan light including necessary screws etc.complete. |
| 40 | Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete : a) 125 x 70 x 4.0mm (ordinary type) |
| 41 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 42 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 43 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 44 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof. |
| 45 | Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade. |
| 46 | Painting 1 coat with oil type wood preservative of approved brand & manufacture on old work |
| 47 | Polishing on wood work with ready made superior quality wax polish of approved brand and manufacture on new work. |
| 48 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give a |
| 49 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 50 | a) Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge |
| 51 | c) Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 52 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 53 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. |
| 54 | d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 55 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. |
| 56 | b) 500 lit. capacity |
| 57 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). |
| 58 | b) 20 mm nominal bore |
| 59 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: |
| 60 | a) 30 cm (12”) length . |
| 61 | Providing and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) with flush valve Nelson/ similar) fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccu.m breaker coupling etc. including cutting making good the walls and floors where required. |
| 62 | Long pan squatting w.c. pan. |
| 63 | Providing and & fixing white vitreous china wash basin including making all connection but excluding the cost of fittings : |
| 64 | b) Flat back wash basin of size 550 x 400 mm |
| 65 | Providing and fixing 5 litres pvc. Automatic flushing cistern with fittings. |
| 66 | Proving and fixing kitchen sink with R.S. or C.I. brackets C.P. brass chain with rubber plug 40 mm C.P. brass waste and 40mm M.I. or C.P. brass trap necessary unions complete, including painting the fittings, cutting and making good the walls where required. |
| 67 | a) White vitreous china sink size 600 x 450 x 200 mm |
| 68 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. |
| 69 | b Plain glass |
| 70 | Providing and and laying scratch resistant floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete a 600x 600 mm Dark Shades |
| 71 | a) 600x 600 mm Dark Shades |
| 72 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. |
| 73 | a) 140 mm nominal size |
| 74 | Providing and fixing coloured ceramic tiles spartek or equivalent of 8" x 8" size and 6 mm thick in skirting and dados on 12 thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 75 | Providing and fixing 4 mm thick plywood plain lining with necessary screws, priming coat on unexposed surface etc. complete with |
| 76 | a)Marine ply facing of approved manufacture |
| 77 | Providing and fixing prefabricated compoundgate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basalticaggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 78 | Providing and fixing position 62 mm thick double skin partition with frame in size 75 x 38 mm and internal frame of 50 mm x 38mm and fixing of 12 mm thick flat pressed melamine faced three layered prelaminated wood based particle board with exterior grade BWP /BWR synthetic resin as per IS-3087 (1985) type I on the edges of Navopan make or equivalent. One side shade of approved lamination and other side white balancing lamination |
| 79 | a) Second class teak wood |
| 80 | 25 mm thick wooden shelves supported on 40 x 40 x 6 mm T or L iron brackets fixed at suitable distances but not exceeding 7 cm apart in 7.5 x 7.5 x 15 cm blocks of cement concrete mix 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm.nominal size) with |
| 81 | a) Second class Indian teak wood |
| 82 | Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. |
| 83 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
