Rural Development And Panchayats Department has published Tender For Thovalai Block- Construction Of Two Classroom Building At First Floor Of Gps Vellamadam In Beemanagari Village Panchayat. Submission Date for this Tender is 13-03-2024. Building Work Tenders in thovalai Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of Two Classroom Building at First Floor of GPS, Vellamadam in Beemanagari Village Panchayat of Thovalai Panchayat Union. |
2 | Earth work excavationand depositing on bank with and initial lead of 10m andlift of 2m in the following classification of soils hard stiff clay black cottonhard red earth shales murram ordinary gravel, stoney earth and extra mixed with small size boulders for foundation SS 20B |
3 | Cement concrete 1:4:8 mix using 40mm gauge hand broken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15cm thick completed etc, complete complying with standard specification and as directed. |
4 | Cement concrete 1:2:4 mix using 20mm gauge hand broken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15cm thick completed etc, complete complying with standard specification and as directed. |
5 | Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed |
6 | Below Basement |
7 | Above Basement |
8 | Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
9 | Below GL |
10 | Ground Floor |
11 | First Floor |
12 | Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. |
13 | BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications.(Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). |
14 | Ground Floor |
15 | First Floor |
16 | Dismantling existing weathering Terrace flooring tiles and clearing the deberis away from site |
17 | Supplying and fixing of mild steel doors including all labour charges as per standard specification |
18 | Supplying and fixing of mild steel windows including all labour charges as per standard specification |
19 | Supplying and fixing of cadappa slab of approved quality 45mm including all cost and conveyance and all chargesetc., |
20 | SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cem,ent mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc.,complete complying with standard specification. |
21 | Plastering the surface of walls with cement mortar 1:5 (one of cement andfour of sand) 12mm thick in all floors Finishing smooth, scaffolding, curing etc., complete complying with standard specification as directed by the departmental officers. |
22 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
23 | Supplying and painting the walls with two coats of oil bound distemperover one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.(The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
24 | Black board painting two coats of approved quality including all labour charges etc., complete |
25 | Paving the floor with kotta stone of size 610x610x20mm with CM 1:3, 20mm thick |
26 | Paving the floor with special type of flooring tiles(cement based Hydraulically pressed Anti Skid tiles 20mm thick in CM 1:3, 20mm thick |
27 | Labour charges for fixing Doors along with frames in psition etc., commplete |
28 | Labour charges for fixing windows and ventilatorsalong with frames in psition etc., commplete |
29 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
30 | Wiring with 2 X 1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductorcable of1100 V grade in suitable PVC rigid pipe concealed in wall and ceilling withPVC accessories inflush with wallwith suitable colour for PVC Concealed Light point / Fan Point ( Fr electrnic Regulator) SD 20 |
31 | Wiring with 2 X 1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductorcable of1100 V grade in suitable PVC rigid pipe concealed in wall and ceilling withPVC accessories inflush with wall with 150mmx100mmx113mmTWswitchboxwith 3mm thick Hylum sheet and 5 A 3pin non interlocking CS Plugwith continuous earth connections of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC ConcealedPVC Plug Point SD 36 |
32 | Supply and fixing of WT bulk head fittingwith guard ( Philips/ Bajaj/ Crompton/ K lite) suitable for 11 W CFLSD 83 |
33 | Supply and fixing of single box type 4" - 40flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fittings LEDTube Light 4W SD 89 |
34 | Supply and fixing of 1200 mm (48") Ac Ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp SD 110 |
35 | Supplying and fixing rainwater down fall pipe of 100mm dia ith necessary shoes, bends and clamps etc., |
36 | Supplying and fixing 50mm GI pipe B Class |
37 | Supply and fixing of MS Hollow Tubular section for Truss member including cost and conveyance and all labour charges etc., complete |
38 | Supplying and fabrication and installation of roof using 50mm thick PUFF Sheet tap sheet 0.40mm thick and bottom sheet 0.45m thick total 50mm thick including cost of making puff sheet using superiorquality puff material self tapping screws as per std. specification including cost and conveyance and all labour charges etc., complete |
39 | Supply and installation of Anutone or Equivalent Brand of Acoustical False ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120kgs / m3, weight 1.8/2.4/3kg / m2 which is suspended by using 0.3mm thick skelet trelis T 15 metal grid system. Skelet trelis T 15 metal grid system f 600x600mm module includes skelet W A 15W0 wall angle with unequal flanges of 15/19mm length 3000mm, fixed alng th rperimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT 15 W36 Main T spply and installation of Anutone or Equivalent Brand f Acostical False ceiling of subtex nubby etc., |
40 | Providing Crnice work for Gyp Board False ceiling |
41 | Painting two coats with Plastic emulsion in all floors using best quality and approved varity of colour brush colour pigments including cost of all materials brushes and scaffolding chargesetc., complete complying withstandard specification for old wall |
42 | Painting two coats using water proof Oil Bound distemper in all the floors. including cost of lime and blue powder, fevical,type gums, brushes, scaffloding charges etc., complete complying withstandard specification for old wall |
43 | Black board painting two coats of approved quality including all labour charges etc., complete for old Black Board |
44 | Painting two coats of old iron work such as steel door and window using synthetic enamel of two coats including all labour chargesetc., complete complying withstandard specification for old items |
45 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail