Tender For Enclosing The Designated C And D/Malba Dumping Site At Je Store By Providing Sheeting As Dust Mitigation Measures In Ward No-172/South Zone, Chirag Delhi., Delhi-Delhi
TDR : 42699172
Tender Notice
BOQ
Expired
Delhi
Delhi
Tender For Enclosing The Designated C And D/Malba Dumping Site At Je Store By Providing Sheeting As Dust Mitigation Measures In Ward No-172/South Zone, Chirag Delhi.
Work Name: Enclosing the designated C&D/Malba dumping site at JE store by providing sheeting as dust mitigation measures in Ward No-172/South Zone, Chirag Delhi.-Enclosing the designated C&D/Malba dumping site at JE store by providing sheeting as dust mitigation measures in Ward No-172/South Zone, Chirag Delhi., DSR DAR CIVIL-2018 and approved items
Sl. No.
Item Description
1
Enclosing the designated C&D/ Malba dumping site at JE store by providing sheeting to prevent dust mitigation in Ward No-172 (Chirag Delhi )/South Zone.
2
10.25.2:Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
3
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
4
2.7.1:Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Ordinary rock
5
4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
