}

Supply Of Hut Type Panels For Various Under Tughlakabad Constituency Ac-52., Delhi-Delhi

Delhi Jal Board-DJB has published Supply Of Hut Type Panels For Various Under Tughlakabad Constituency Ac-52.. Submission Date for this Tender is 07-03-2024. General Hardware Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

42656944
Supply Of Hut Type Panels For Various Under Tughlakabad Constituency Ac-52.
Open Tender
Indian
Delhi
Delhi
07-03-2024

Tender Details

Supply Of Hut Type Panels For Various Under Tughlakabad Constituency Ac-52.

Key Value

Document Fees
INR 500 /-
EMD
INR 10500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :- Supply of Hut Type Panels for Various under Tughlakabad Constituency AC-52.
Sl. No. Item Description
1S/o Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. (1) MCCB 63 Amp, 4 Pole-1 No. (2) RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No. (3) Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No (4) Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No. (5) Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No. (6) LED Indicating lamps with fitting (a set of 3 lamps) 1Set (7) Shunt capacitor of 5 KVAR with three phase isolator 1No. (8) Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No. (9) Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No. (10) Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make :- All the insert used in panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail