|
| 1 | Taking down chowkats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardwarecomplete all as specified and directed. |
| 2 | Taking down chowkats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardwarecomplete all as specified and directed. |
| 3 | Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthentic enamel paintcomplete all as specified and directed. |
| 4 | Material and labour for prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified. |
| 5 | Supply and fixing of 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters(panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed. |
| 6 | Supply and fixing of 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-Icomplete all as specified & directed. |
| 7 | Supply and fixing of 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed. |
| 8 | Supply and fixing of aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. |
| 9 | Supply and fixing of 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed. |
| 10 | Supply and fixing of mild steel wire cloth 0.56 mmnominal dia of wire and average width of aperture 1.18 mm fixed with stainless steel wire staples all as specified & directed. |
| 11 | Material and labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. |
| 12 | Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shuters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on Drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on Drg No CEPZ-TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | Dismantling Asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, complete all as specified. |
| 14 | Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed. |
| 15 | Supply and fixing of Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws, complete all as specified & directed. |
| 16 | Material and labour for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including preparation of new plastered surface of walls, applying 2mm thick wall care putty to desired even and smooth and levelled surfaces and applying two coats of distemper oil bound distemper over a coat of primer complete all as specified and directed. |
| 17 | Material and labour for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and fair without using extra cement but using water proofing compound as per manufacturer\"s instructions including preparing new plastered surface wall and applying two coats of exterior weather proof paint (Apex) over primer on external surfaces,complete all as specified and directed. |
| 18 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 19 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin floors etc set and jointed in neat cement slurry and pointed in coloured cement laid over 15 mm thick screed bed in CM (1:4) including dismantlingfloor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises and roughening surface of old concrete floor by picking, sweeping clean and washing with water complete allas specified & directed. |
| 20 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.36 sqmin skirting/dado/risers etc set and jointed in neat cement slurry and pointed in coloured cement laid over 10 mm thick screed bed in CM (1:4) including dismantlingfloor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site and rubbish off the premises complete allas specified & directed. |
| 21 | Material and labour for Brick work with flyash old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6)complete all as specified and directed. |
| 22 | All as per Srl item No. 21 above but except brick, complete all as specified and directed. |
| 23 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drainsetc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 24 | Dismantling of rolled mild steel as in purlins, rafters etc and refixing of purlins, rafters or truss including necessary cleats,complete all as specified. |
| 25 | Material and labour for preparation of old painted surface of steel of any discription exc 10cm width or girth and providing two coat of synthetic enamel paint, complete all as specified and directed. |
| 26 | Dismantling of rolled mild steel as in purlins, rafters etcincluding necessary cleats,complete all as specified. |
| 27 | Material and labour for Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 or latest grade YSt 240,complete all as specified. |
| 28 | Supply and fixing of Mild steel screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other ends, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut but length of bolt exc 22.5cm and n exc 30cm long, diameter of shank 5 to 10mm, complete all as specified & directed. |
| 29 | Material and labour for Mild steelframed work as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to 410-W(Gde-E-250) quality-A, complete all as specified & directed. |
| 30 | Supply and fixing in repair 25 mm bore stainless steel, curtain rod (wall thickness not less than 1.25mm) including fancy type brackets, funnels etc suitable for curtain rod etc complete all as specified and directed. |
| 31 | Material and labour for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed. |
| 32 | Material & labour for 75mm thick Cement concrete type (1:4:8) type D-2 (using 40mm graded aggregate) as in sub base/base of floor complete all as specified & directed. |
| 33 | Material & labour for Precast interlocking paver blocks factory made confirming to IS-15658-2006 of60mm thick grade of concrete M-35with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) including 50mm thick sand cushioning under floors or in foundations including watering and consolidation, complete all as specified & directed. |
| 34 | Material & labour for PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, benching, rounded or chamfered on edges, complete all as specified & directed. |
| 35 | Material and labour forRCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified. |
| 36 | Material and labour for use & waste of form work to edges of concrete flats, treads, break in floors, window cills, concrete railings openings in concrete walls, floor and roof and exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete, complete all as specified & directed. |
| 37 | Material and labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 38 | Material and labour formild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | Supply and fixing of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specifed. |
| 40 | Material and labour for rolled steel mild work as in framing for cooler stand, cladding, glazing and the like fixed with angle cleats and connecting plates, conforming to Fe-410W grade-E-250, complete all as specified. |
| 41 | Supply and fixing of 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 42 | Supply and fixing of aluminium wardrobe hooks (single) 50mm to60mm, complete all as specified and directed. |
| 43 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.. |
| 44 | Taking down carefully point wiring with copper/aluminium conductor for light, fan, socket or power including fittings such as switches, sockets, light fitting any type, holders, (batten type and pendent), ceiling rose, wooden boards, shades any type and making good disturbed surfaces, complete all as specified & directed. |
| 45 | Material and labour for Point wiring using FRLSH PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.5 mm thick including all fittings viz tees, bend, junction box and modular metal flush sunken box 1.2 mm thick with suitable support frame and cover plate (inner/outer) of required modules for mounting switches, sockets, fan regulators, connecting earth for light/fan/bell point including cutting chases in walls and making good to disturbed surface complete all as specified and directed .(Note : Switch/bell push/fan regulatorshall be measured and paid separately) |
| 46 | All as per Srl item No. 45 above but for 5 pin 5 Amp socket outlet point on same board controlled by one switch 5Amp one way,complete all as specified and directed. |
| 47 | All as per Srl item No. 45 above but for one 15Amp socket outlet point concealed using 2.5Sqmm FRLSH PVC insulated multi-strand copper conductor wire including 2.5Sqmm FRLSH PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishescomplete all as specified and directed. |
| 48 | Supply & fixing Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed. |
| 49 | Supply & fixing Socket outlet, 2 in 1, 5 pin, 6 Amp, flush type,AC 230 volts etc complete all as specified and directed. |
| 50 | Supply & fixing Socket outlet 2 in 1, 3 pin, 5 & 15Amp, flush type,AC 230 volts etc complete, all as specified and directed. |
| 51 | Supply & fixing Switch piano flush type, single pole, 15 Amp, one way, AC 230 volts etc complete, all as specified and directed. |
| 52 | Supply and fixing Fan regulator (0-5 step type) suitablefor 1200mm sweep ceiling fan hum free, 120W including necessary connections complete all as specified and directed. |
| 53 | Supply and fixing Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc,complete all as specified and directed. |
| 54 | Supply and fixing of 20W surface/wall mounted box type batten LED luminaire, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 120 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed. |
| 55 | Supply and fixing Energy saving, surface mounted bulk head luminaire 10W made of pressure die cast aluminium housing & polycarbonate diffuser with IP 65 protection in house driver and luminous efficacy > 100 lumens/Watt, PF > 0.90 withcolour temperature (CCT) > 5700 + 300K, complete including connecting up with suitable size flexible copper conductor cable complete all as specified and directed. |
| 56 | Supply and fixing in replcement sheet metal enclosure double door MCB distribution board Single pole & neutral 240 volts 8 way with IP-43, IK-09 protection having fully insulated copper busbar,neutral bar, earth bar and cable ties for cable management and polyuthrene gasket and flush mounting into the wall and making good the disturbed wall surfaces to match with existing specification including taking out old DB, complete all as specified and directed. |
| 57 | Supply and fixing in replacement MCB single pole (SP) 240 volts, , 50Hz, 6 to 32 Amps, 10KA (B-series) complete all as specified and directed. |
| 58 | Supply and fixing in replacement MCB single pole (SP) 240 volts, , 50Hz, 32 Amps, 10KA (C-series) complete all as specified and directed. |
| 59 | Supply and fixing ofLED wall security lights of 25 Watt having pressure die cast aluminium housing with system lumens efficacy >110 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF> 0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 60 | Supply and fixing of LED flood lights of 30 Watt having pressure die cast aluminium housing with system lumens efficacy > 110 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl GI bracket of suitable size for mounting on wall by means nuts bolts and connecting up with three core twisted flexible copper conductor calbe complete all as specified and directed. |
| 61 | Material & labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected by 4 mm dia GI wire as earth leadby means of nuts and bolt, thimbles, check nuts, washers of GI or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, with fairfinish, internal dimension of chamber shall be 300x 300 mm ,15 mm thick plaster in CM 1:4, funnel with wire guage mesh, CI frame with 10 mm thick hinged CI cover with flush type lifting handle at ground level, alternate layer of charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part -1 (2009) and specified including provision of GI strip upto 7.5 metre protected by 15 mm dia light grade pipe and watering pipe shall be 20 mm bore medium grade, excavation, earth work and connecting the earthing to an earthing test point mainswitch board all as specified and testing complete all as specified and directed. by Engr-In-Charge.Note: On testing after completion if the desired earth resistance is not obtained the earthing will be re-done at no extra cost. |
| 62 | Supply, laying, jointing and testing LT underground cables XLPE insulated screened PVC bedded galvanized steel strips armoured electric power cable (heavy duty) with aluminium conductor LT grade 1100 volts grade and cross section area 16 sqmm 2 core conforming to latest IS and laid in trenches or fixed to wall/pole or passing through pipe complete with cable lugs, glands etc including taking up/down old unsv service cable any size, complete all as specified anddirected. Note: Excavation, earth work, sand cushioning and brick protection to be measured and paid for separately. |
| 63 | Material & Labour for sand cushioning with a layer of sand 80mm thickbefore laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed.Note: punned thickness shall be measured and paid. |
| 64 | Material & Labour for cover to underground cable with one layer of bricks using sub class ‘B’ bricks (Old size) laid flat across the cable complete all as specified.Note:Excavation and earth work measured separately. |
| 65 | Excavation in trenches not exc. 1.5m wide for foundation etc. orfor shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out,complete all as specified and as directed. |
| 66 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified. |
| 67 | Removing excavated materials to a distance not exc. 50 mtr and depositingwhere directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 68 | Material & Labour for galvanised iron tubes 40 mm bore, light grade for protection of cable under road crossing fixed to wall or pole including 2 nos of FI clamps of suitable size with nuts and bolts and taking out of old GI tubingcomplete all as specified and directed. |
