Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P 545 And P 861 In Tech Area At Af Stn Jodhpur. Submission Date for this Tender is 28-03-2024. Building Work Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Mar-2024 | Revision of BOQ | BOQ | 21-03-2024 |
| 2 | 21-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of block brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Demolition ofconcrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and directed. |
| 3 | Demolition of concrete (reinforced) of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 4 | Demolition of cement concrete in any position of any description and disposing off debris outside MD land complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm not exc.4 sqm eachcomplete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutters from the frame)area not exceeding 1.5 Sqm complete all as specified and as directed. |
| 7 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in hard dense soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed |
| 9 | M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 10 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 11 | Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed by Engr-in- Charge. |
| 12 | M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etccomplete all as specified and directed. |
| 14 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed by the Engr-in - Charge. |
| 15 | S&F coloured Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 16 | M&L for double charged Vitrified light shade coloured tiles9 to10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqmthick in floors etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including over screed bed or bedding layer ofmortar15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed. |
| 17 | M&L forglazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 300 x 7mm/300x600x 7 mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 18 | M&L for double charged Vitrified light shade coloured tiles9 to 10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqmthick in skirtingetc.Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 19 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps,treads/risers jambs, pillars, window-cills, cooking platforms including chamfered in exposed edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary screed bed etc complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in padding layer on roof complete all as specified and directed. |
| 21 | M&L for 10 mm thick rendering in cement mortar 1:3 with water proofing compound @3% by weight of cement, on concrete surface on roof, finishing even and smooth without using extra cement complete all as specified and directed by the Engr-in-Charge. Note-WPC shall be measured and paid separately. |
| 22 | M&L for preparing new surface of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer"s instruction to stop leakage/seepage from roof/wall complete all as specified and directed by Engr-in-Charge. Note- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 23 | Supply only integral water proofing compound. |
| 24 | Supply and fix for tensile cloth structure with wall thickness of steel not less than 0.5 mm weight of tensile cloth 700 to 1500 gm/sqm, with temperature resistant -50 to +70 (Degree celsius), Tensile strength (Wrap/Weft) 2400-4200 N/5CM, Tear strength (Wrap/Weft) 270-580 N, Fire rating B1/DIN 4102 (900g/Sqm), Wind load 169.2 Km/h with fire retarded tensile roof incl fabrication of structure in approved design fixing, priming of sturcture with primer and applying two coat of synthetic eamel paint complete all as per manufacturers instructionsand as specified and directed by EIC. Note- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 25 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 gde E-165 complete all as specified and directed. |
| 26 | S&F for 5 mm thick coloured ACP sheet cladding over MS frame work or any other surfaces including making necessary arrangement for light, vertical , horizontal offset of any size/any pattern complete all as specified and directed. |
| 27 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 28 | M&L for 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed. |
| 29 | M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed. |
| 30 | M&L for Providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate inlandings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar 1:4 complete all as specified and directed. |
| 31 | Providing and fixing factory made uPVC of approved colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm) Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners including hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system and 5mm thick glazing with selected quality glass area exceeding 1 sqm complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 32 | S&F fixing factory made uPVC of approved colour casement (Openable) door made of extruded profile wilh wall thickness of 2.3mm ( + 0.2mm), profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including Hardware: [casement door handle made of zinc alloyed (white powder coated), Corner striker,Secondary Strikers, Cylinder, Doortransmission gear made of mild steel with multi point locking system with strikes, 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 33 | Providing and fixing factory made uPVC of approved colour fixed window made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm), Window profile with hollow section with multi chamber, Frame (60mm x 58mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 + 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners - 5mm thick glazing with selected quality glass, area exceeding 1 sqm. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 34 | S&F for powder coated anodised aluminium framefor doors, windows, ventilators, partition etc with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron )complete all as specified and directed. |
| 35 | S & F for 5 mm thick sheet glass ordinary quality in square exc 0.50 Sqm each in each paneincluding rubber beading for fixing of glass complete all as specified and as directed by Engr-in-Charge . |
| 36 | M&L for complete removal of existing treatment of wall incl preparation of surface with applying of 2 to 3 mm wall care putty and finishing walls with texturedpaint of required shade of approved colour with two coat applied over and including a coat of primer complete all as specified and directed. |
| 37 | M&L for preparation of new plastered surfaces of walls/ceiling with applying of 2 to 3 mm wall care putty and applying two coat of oil bound distemper with 1st quality acrylic distemperhaving VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete, as per manufacturer"s specification complete all as specified and directed. |
| 38 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 39 | M&L forpreparation of surface with applying of 2 to 3 mm wall care putty and finishingwalls with Acrylic Smooth exterior paint of required shade applying two coats @1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 40 | M&L for complete removal of existing treatment and preparation of surface with applying of 2 to 3 mm wall care putty and finishing walls with two coat of Premium Acrylic Smooth exterior paint with Silicone additives of required shade over aand including a coat of primer complete all as specified and directed. |
| 41 | M&L for complete removal of existing treatment and preparation of surfacewith applying of 2 to 3 mm wall care putty and applying two coat of oil bound distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour, as per manufacturer"s specification complete all as specified and directed. |
| 42 | S&F in repair for GI grid frame work of Silhouette grooved design for false ceiling fixed with screw suspended with 6mm dia GI(upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed. |
| 43 | S&F for 5 to 6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work including all fittings complete all as specified and directed. |
| 44 | M&L for RCC 1:2:4 type B-0 (nominal mix) (using 12.5 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 45 | M&L for Mild steel TMT bars 8 mm to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 46 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished flat surfaces complete all as specified and directed. |
| 47 | S&F in for hinges medium weight stainless steel of size 100 mm complete all as specified and directed. |
| 48 | S&F for Aluminium anodised barrel tower bolt, of extuded section and fixed of 150 mm long complete all as specified and directed. |
| 49 | S&F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 50 | S&Ffor extruded aluminium alloy handles fabricated type, anodised 150 mm long all as specified and directed |
| 51 | S&F in repair for 15 mm bore CP wall mixer (3-in-1 ) for mixing hot and cold waterwith arrangement for both telephonic hand shower and overhead shower with long bend pipe complete all as specified and directed (Make Cera cat part No. F1005413 (Ruby))/Johnson Cat part No. T3223C (Fusion)/Jaquar Cat part No. FUS-29281(Fusion) or equivalent as per make in Appx B as approved by GE. |
| 52 | S&F in repair for One piece EWC with seat cover and Twin flush fittings of size 640 mm x 350 mm x 725 mm of snow white colour incl 220 mm S trap complete all as specified and directed (Make Cera Catpart No. S1013208VS(Cattler)/Jaquar Cat part No. FSS-WHT-29853S300UFSM(Fusion)/Johnson Cat part No. G3907P0103 (VIGO) or equivalent as per make in Appx B as approved by GE. |
| 53 | S&F in repair for counter top wash hand basin of size 520 mm x 450 mm x 200 mm of snow white colour incl all necessay fittings etc complete all as specified and directed (Make Cera Cat part no. S2030101 (Clair) / Johnson Cat part No. P6212PW0401 (Grande) /Jaquar cat part No. ARS-WHT-39601(ARIA) or equivalent as per make in Appx B as approved by GE. |
| 54 | S&F in repair for Single lever basin mixer with 450 mm braided connection pipe complete all as specified and directed (Make Cera Cat part No. F1005451(Ruby)/Jaquar cat part No. FUS-29052B (Fusion)/Johnson cat part No. T3245C (Fusion) or equivalent as per make in Appx B as approved by GE.) |
| 55 | S&F in repair for 15 mm bore angle valve fancy type, CP, cast copper alloy screwed down high presure, with wall flange complete all as specified and directed (Make Cera cat part No. F1005201 (Ruby) or equivalent as per make in Appx B as approved by GE.) |
| 56 | S&F in repair for 15 mm bore Bib cock fancy type, CP, cast copper alloy long nose with wall flange complete all as specified and directed (Make Cera cat part No. F1005152 (Ruby)/Jaquar cat part No. FUS-29037 (Fusion)/Johnson cat part No. T3205C (Fusion) or equivalent as per make in Appx B as approved by GE.) |
| 57 | S&F in repair for fancy type overhead shower of size 200 x 200 mm with necessary fittings complete all as specified and directed (Make Cera Cat part No. F7010503AB/Jaquar cat part No. OHS-35497/Johnson cat part No. S0006C or equivalent as per make in Appx B as approved by GE.) |
| 58 | S&Fin repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long SS braided connection pipe and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed (Make Cera cat part No. F8030111AB/Jaquar cat part No. ALD 563/Johnson cat part No. S00305C or equivalent as per make in Appx B as approved by GE.) |
| 59 | S&F in repair for towel rack of SS grade 304 with shelf 600 mm including necessary fittings complete all as specified and directed. (Make Cera cat part No. F5014131CH / Johnson cat part No. T1356C/Jaquar cat part No. CAN-1181FHS or equivalent as per make in Appx B as approved by GE.) |
| 60 | S&F in repair for Soap Dish of SS grade 304 incl fittings and fixing in position complete all as specified and directed (Make Cera cat part No. F5014106CH/Jaquar cat part No. AKP-35731P/Johnson cat part No. T3252C (Fusion) or equivalent as per make in Appx B as approved by GE.) |
| 61 | S&F in repair for toilet paper holder with flap guard of SS grade 304 fitting with necessary screws complete all as specified and directed (Make Cera Cat part No. F5014110CH/Johnson cat part No. T1354C (Delta)/Jaquar cat part No. CAN-1153S or equivalent as per make in Appx B as approved by GE.) |
| 62 | S&F in repair for corner glass shelf of size 225x225 mm with SS bars on sides complete all as specified and directed (Make Cera cat part no. F5005102/Hindware cat part No. F880010/Jaquar cat part No. ACN-1173 or equivalent as per make in Appx B as approved by GE.) |
| 63 | S&F in repair for CP towel ring of round shape with round flange complete all as specified and directed (Make Cera/Johnson/Jaquar or equivalent as per make in Appx B as approved by GE.) |
| 64 | S&F in repair formirror of 5 mm thick glass with double coat of protection and longevity grounded edges for safety and silver plating on the back for better reflection including with stainless steel decorative fastener complete all as specified and directed. |
| 65 | S&F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 66 | S & F in repair for PVC connection 15 mm size with nuts of length 450 mm, complete all as specified and as directed.(Make Cera cat part No. F8070402 or equivalent as per make in Appx B as approved by GE.) |
| 67 | M & L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 68 | M & L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 69 | S&F in repairs for 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed. |
| 70 | S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 15 or 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed. |
| 71 | S&F in repair CP grating of size 100 mm dia with/without waste hole complete all as specified. |
| 72 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down old pipes all as specified and as directed. |
| 73 | All as per item No. 72 above but 110 mm dia . |
| 74 | S & F for 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed. |
| 75 | S & F PVC (SWR)bends any radius 75 mm dia, ,complete all as specified and as directed. |
| 76 | M&L for rendering 05 mm thick on fair faces of brick work or stone/ concrete surfaces on ceiling with CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 77 | Returning, filling in, including spreading, levelling, watering and wellramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. |
| 78 | Removing of excavated soil to a distance not exc. 50 Mtr depositing where directed complete all as specified and directed. |
| 79 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 80 | S&F for Solar control film 50 micron decorative type with/without inbuilt logo of unit/Squadron/Air force as directed complete reflective type sticked to glass panes as per instructions of manufacturersand as specified and directed. |
| 81 | S&F for roller type Venetian blinds, vertical/horizontal type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons/loops etc., fixed cuttings and alteration if necessary wherever AC / coolers existscomplete all as specified and as directed. |
| 82 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty including taking down old one all as specified and as directed. |
| 83 | S & F for 150 mm floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed. |
| 84 | S&F in repair for 12 mm solid PVC ply of 1st quality of approved colour fixed with necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc complete all as specified and as directed by Engr-in-Charge. |
| 85 | M&L for precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggreagte)louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed. |
| 86 | M&L for precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggreagte) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating, frame, etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 87 | S&F expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight complete all as specified and directed. |
| 88 | Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete,such as switches, ceiling roses,pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc.Complete all as specified and directed by Engineer-in-Charge. |
| 89 | Taking down MCB DB any type any size and making good disturbed surface of walls, floors etc.Complete all as specified and directed. |
| 90 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and includingPVC concealed conduit of 20 mm bore with accessories in wall floor etc ISI marked, including modular sunken boxes concealed in wall, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly , including making good of disturbed surface of cement plaster, whitewash/ distempered match with original colour complete all as specified and directed for one light/ fan/Exhaust fan point controlled by one switch. |
| 91 | All as per item No 90 above but for one 3 pin 5 amps socket outlet on the same board with other switches. |
| 92 | All as per item No 90 above but for one 3 pin 5 amps socket outlet on independent board with other switches. |
| 93 | All as per item No 90 above but for One Call bell controled by one bell push button in independent board. |
| 94 | All as per item No 90 above but with 2.5 Sq mm copper conductor multistraned pvc insulated and unshethed cable for Independent one 3 pin 15 Amps socket outlet and including 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FRLS cable for continuous earth wire. |
| 95 | S&F modular switches 6 amps single pole one way complete all as specified and directed. |
| 96 | S&Fmodular socketes outlet6 amps 5 pin combine 2 Module complete all as specified and directed. |
| 97 | S&F modular switches 16 Asingle pole one way, 1 Module complete all as specified and directed. |
| 98 | S&F modular socket6-16 A 2/3 pin combined 2 Module complete all as specified and directed. |
| 99 | S&F Modular Bell push switch 6A 1 module complete all as specified and directed. |
| 100 | S&F White cover plate with frame, 3 module complete all as specified and directed. |
| 101 | S&F White cover plate with frame, 8 module complete all as specified and directed. |
| 102 | S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 103 | Material & labourfor sub main wiring with 2 Run of 4.0 Sqmm cable multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC concealed conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories all in wall and surface on ceiling and also including one run of 4.0 sqmm cable for earth wire of specified size earth continuity conductor complete including taking down existing sub main wiring all as specified and directed by Engineer in charge.(Note:- 2 runs of main cable one run of earth wire and one run ofPVC pipe will be measured and paid as an one run.) |
| 104 | All as per Item No 103 but 2 Run of 6 Sqmm cable and one run of 6 sqmm cable for earth wire. |
| 105 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 106 | Supply & fixing wall mounted fan 400mm sweep with 5 star rating complete with stand, clamp and other fixtures and connecting up to and including provision of flexible three core copper conductor cable 23/0.0076 from ceiling rose to connector block complete all as specified and directed. |
| 107 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 240V including MCB 20 amps complete all as specified and directed. |
| 108 | Supply and fixing round shape downlight 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 109 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 110 | S&F MCB 6 to 32 Amps SP, 240 V, 10 KA "C" curve, IP 20 complete all as specified and directed. |
| 111 | S&F MCB 40 to 63 Amps SPN, 240 V, C curve 10 KA, IP 20 complete all as specified and directed. |
| 112 | S&F and testing of MCB DB SPN 8 way 240 volt with double door, IP - 43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type all as directed by Engineer-in-Charge. |
| 113 | M & L forEarthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, precast RCC 50mm thick in cement concrete(1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm mmbore midium grade GI protection pipe, test point etc complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 114 | Supply & fixingsheet metal enclosure verticalMCB DB TPN 04 ways, IP 43, with 200 amps rated bus bar 415 Volts 63 Amps suitable for TPN MCCB 36 KA as incomer, double door with magnetic locking system complete all as specified & directed by the Engineer-in-Charge |
| 115 | S&FMCCB, 125 Amps, 3 pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge. |
| 116 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed. |
| 117 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of cables, errection of poles, struts/stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 118 | Returning filling in including spreading leveling watering and well ramming inlayers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 119 | Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed. |
| 120 | M&L for Sand cusioning for cable with tibba sand & punning to providea required cover complete all as specified and directed. |
| 121 | Material and labour for stone slab/patti, 40 to 50mm thick, rough dressed, Jodhpur stone slab cover in trenches for protection of cables, 25cm to 35cm wide and 80 cm long, laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed. |
| 122 | Supply, installation, testing & commissioning of hi wall split air conditioner unit BEE 5 star rated indoor/outdoor (evaporator & condenser shall be of copper), inverter type copper tubing of required sizeand communication cable as per provided by OEM for proper installation and outdoor unit with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality of capacity 1.5 TR 230 volt AC supply all as directed by Engineer-in-charge. |
| 123 | Supply & fixing voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy + 2.5 % and of capacity 3 KVA complete all as specified and directed by Engineer-in-charge. |
| 124 | Supply & fixing building security light luminaire LED 25 W 600K, IP-65 with asthetically designed sheet aluminium housing and UV stabilised acrylic cover complete with lamp and internal connection including bracket made of 40 mm dia GI pipe light grade 1.5 m length fixed with MS clamp of suitable size grouted on wall with suitable nos of screws/bolts/nuts etc complete all as specified and directed. |
| 125 | S & F wall/floor mounted stand suitable for outdoor unit of split AC complete all as specified and directed by Engineer-in-charge. |
| 126 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc., complete complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
