Bharat Sanchar Nigam Limited-BSNL has published Tender For Day To Day Building Maintenance Work Under Oa- Mau (For Six Months). Submission Date for this Tender is 11-03-2024. Building Repair Tenders in Mau Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
2 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
3 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
4 | 20 mm dia (heavy type) |
5 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
6 | Single rubber stopper |
7 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
8 | 40 mm thick with 20 mm nominal size stone aggregate |
9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
10 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
12 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
14 | With cement mortar 1:4 (1 cement : 4 fine sand). |
15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
16 | Float glass panes of thickness 4 mm. |
17 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. |
18 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : |
19 | With F.P.S. brick tiles |
20 | Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
21 | Kitchen sink without drain board |
22 | 610x460 mm bowl depth 200 mm. |
23 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
24 | Orissa pattern W.C. pan of size 580x440 mm |
25 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
26 | 10 litre capacity - White |
27 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
28 | Black solid plastic seat with lid |
29 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
30 | Flat back wash basin of size 550x400 mm. |
31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
32 | Semi rigid pipe |
33 | 32 mm dia |
34 | 40 mm dia |
35 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
36 | Rectangular shape 453x357 mm |
37 | Oval shape 450x350 mm (outer dimensions) |
38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
39 | 15 mm nominal outer dia. Pipes. |
40 | 20 mm nominal outer dia. Pipes. |
41 | 25 mm nominal outer dia .Pipes. |
42 | 32 mm nominal outer dia. Pipes. |
43 | 40 mm nominal outer dia. Pipes. |
44 | 50 mm nominal outer dia. Pipes. |
45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
46 | 15 mm nominal outer dia. Pipes. |
47 | 20 mm nominal outer dia. Pipes. |
48 | 25 mm nominal outer dia. Pipes. |
49 | 32 mm nominal outer dia. Pipes. |
50 | 40 mm nominal outer dia. Pipes. |
51 | 50 mm nominal outer dia. Pipes. |
52 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
53 | 15 mm dia. nominal bore |
54 | 20 mm dia. nominal bore |
55 | 25 mm dia. nominal bore |
56 | 40 mm dia. nominal bore |
57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
58 | 25 mm nominal bore |
59 | 40 mm nominal bore |
60 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
61 | 45 cm length |
62 | 15 mm nominal bore |
63 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
64 | 100 mm diameter |
65 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
66 | 15 mm nominal bore. |
67 | 20 mm nominal bore. |
68 | 25 mm nominal bore. |
69 | 40 mm nominal bore. |
70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
71 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
72 | 15 mm nominal bore |
73 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
74 | 15 mm nominal bore. |
75 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
76 | 15mm nominal bore |
77 | Providing and fixing PTMT bib cock of approved quality and colour. |
78 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
79 | Providing and fixing PTMT stop cock of approved quality and colour. |
80 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
81 | Providing and fixing PTMT pillar cock of approved quality and colour . |
82 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
83 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
84 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
85 | 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
86 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
87 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
88 | 15 mm nominal bore. Weighing not less than 32 gms. |
89 | 20mm nominal bore. Weighing not less than 40 gms. |
90 | 25mm nominal bore. Weighing not less than 62 gms. |
91 | Repairing wherever required of bib cock, pillar cock, stop cock G.I. waste pipe and other fittings of C.P. & brass etc. |
92 | Repairing of leaking of toilet joint with P trap, floor traps, rain water pipes low level and high level cisterns. |
93 | Repairing of leaking in SCI pipes immediately i/c the cost of sealing material such as jute & cement etc. |
94 | P/F G.I. nipple for PVC tank all complete as per direction of Engineer-in-charge.. |
95 | a)15 mm nominal bore. |
96 | b)20mm nominal bore. |
97 | c)25mmnominal bore. |
98 | Repairing of wooden door/ window frames and shutters with part replacement of wood work wherever required after taking out the shutter i/c cost of wood replaced as per direction of Engineer-in-charge, repair at each location of shutter shall be treated as one job). |
99 | Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C. |
100 | Providing and fixing of pivot in aluminium door shutter etc. all complete as per direction of E-in-C. |
101 | Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered in scheduled items and are not possibleto measure. |
102 | P/F 26 gauge aluminium sheet i/c necessary nails etc. complete as per direction of Engineer-in-charge. |
103 | P/F C.P. brass waste Jali for sink or wash basin. |
104 | 32 mm dia |
105 | P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts. |
106 | P/F stainless steel jail (grating) with or without hole for waste pipe for floor/Nahani trap. |
107 | 75 mm dia weight not less than 70 gms. |
108 | 100 mm dia weight not less than 100 gms. |
109 | Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C. |
110 | Providing assistant forfor day to day maintenance purpose. |
111 | P/F PVC Ball valve to pvc low level flushing cistern. |
112 | P/F PVC Syphon to pvc low level cistern all complete as per direction of Engineer-in-charge. |
113 | P/F gun metal gate valve with C.I. wheel of approved quality(screwed end): |
114 | a)20mm nominal bore. |
115 | P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same. |
116 | P/F SCI P trap of Nicco to WC pan i/c labour charges & other fixing materials etc. all complete as per direction of Engineer_in_charge. |
117 | Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge. |
118 | Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe linesetc. complete as per direction of E.-in-C. |
119 | Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day or part day work at one site shall be taken as one job.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail