Construction Of 8 Nos. Of Quarters For Staff Of Gyawepurang Co Hq., East Kameng-Arunachal Pradesh

TDR : 42646020

Tender Notice
BOQ

Expired

East Kameng , Arunachal Pradesh

Tender Brief : Construction Of 8 Nos. Of Quarters For Staff Of Gyawepurang Co Hq.

Document Fees
₹ 3000 /-

EMD
₹ 396000.0 /-

Tender Value
₹ 3.96 Crore /-

Submission Date
08-03-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	EARTH WORK
2	Earth work in excavation in foundationtrenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
3	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
4	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
5	CONCRETE WORK
6	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
7	a) Foundations and plinth :
8	Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
9	Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
10	RCC WORK
11	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
12	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
13	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface
14	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
15	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
16	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
17	Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement:2 coarse sand : 4 stone aggregate 20 mm nominal size).
18	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
19	Centring and shuttering including strutting, propping etc and removal of form work for :
20	a)Foundation, footings, bases of columns etc. and mass concrete.
21	b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
22	c) Column, pillars, posts and struts etc.
23	d) Lintels, beams, girders, bressumers and cantilevers etc.
24	Reinforcement of RCC work including bending, binding and placing in position complete.
25	a)Tar/ TMT steel
26	BRICK WORK
27	Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
28	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
29	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
30	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
31	WOOD WORK
32	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
33	Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
34	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
35	a) 38 mm thick best available local wood, class - B I
36	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
37	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
38	a) Ornamental grill.
39	: IRON FITTINGS :
40	Providing and fixingAluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
41	a)300 x 16 mm
42	Providing and fixing Aluminiumtower bolts (barrel type) with necessary screws etc complete.
43	a) 250 x 10 mm
44	b) 150 x 10 mm
45	Providing and fixing Aluminium handles with necessary screws etc complete.
46	a)125 mm
47	b) 100 mm
48	Providing and fixing MS Hooks and Eyes.
49	a) 150 mm
50	Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
51	Timber class A-IV
52	Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
53	STEEL WORK
54	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
55	Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
56	Providing and fixing bolts up to 300 mm in length including nuts and washers complete
57	FLOORING
58	Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
59	a) Size of Tile 1000x1000 mm
60	Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
61	a) Size of Tile 1000x1000 mm
62	White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
63	Chequeredterrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
64	ROOFING
65	Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
66	a) 0.63 mm thick GI sheet
67	Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
68	a) 0.63 mm thick GI sheet
69	Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
70	: CEILING :
71	Providing and fixing 12 mm thick insulated boardceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
72	Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
73	a) Best local approved quality wood.
74	Extra for making chamfered edges of beading.
75	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
76	b) 100 mm diameter pipe
77	Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc
78	b) 100 mm diameter pipe
79	Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
80	A C.I Plain bend
81	b) 100 mm diameter pipe
82	B) C.I head flat or corner type bend
83	b) 100 mm diameter pipe
84	FINISHING
85	15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
86	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
87	Applying one coat of cement primer of approved brand and manufacture on wall surface.
88	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
89	Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
90	Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
91	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
92	Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
93	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
94	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
95	Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new workincluding an under coat of flatting varnish with glue sizing.
96	Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
97	Painting two or morecoats on GI sheetswithsuperior ready mixedpaint of approved brand and manufacturein white,grey or green shades on new work to give an even shade
98	DRAINAGE
99	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
100	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
101	a) 100 mm dia SW pipes
102	b) 150 mm dia SW pipes
103	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
104	a) 100 mm dia SW pipes
105	b) 150 mm dia SW pipes
106	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
107	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
108	WATER SUPPLY
109	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
110	a) 15 mm nominal bore
111	b) 20mm nominal bore
112	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
113	a) 25 mm nominal bore
114	Providing and fixing brass bib cock of approved quality.
115	a)15 mm nominal bore
116	b)20mm nominal bore
117	Providing and fixing brass stop cock of approved quality.
118	a) 15 mm nominal bore
119	b) 20 mm nominal bore
120	Providing and fixing PVC connection pipe with brass union.
121	A) 30 cm length
122	a) 15 mm nominal bore
123	Providing and fixing non-return valve of approved quality.
124	a) 25 mm nominal bore
125	Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.
126	a) 15 mm nominal bore
127	b) 20 mm nominal bore
128	Providing and filling sand all round GI pipes in external work.
129	a) 25 mm nominal bore
130	SANITARY INSTALLATION
131	Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
132	a) WC pan with white plastic seat and lid.
133	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
134	a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
135	Providing and fixing kitchen sink including making all connection excluding cost of fittings.
136	a) White glazed fire clay sink size 600x450x150 mm
137	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
138	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
139	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
140	Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
141	b)100 mm dia
142	Providing and fixing sand cast iron heel rest sanitary bend.
143	a) 100 mm dia
144	b) 50 mm dia
145	Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete.
146	a) 100 x 100 x 100 mm
147	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
148	b) 100 mm inlet and 75 mm outlet
149	Internal Electrification for Type-I Quarters
150	(A)SUB HEAD-I( WIRING)
151	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRPVCinsulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S.box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
152	Group \"A\"
153	Group \"B\"
154	Group \"C\"
155	Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
156	Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
157	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
158	2 x 2.5 mm² + 1 x 2.5 mm² earth wire
159	2 x 4.0 mm² + 1 x 4.0 mm² earth wire
160	SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
161	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
162	32 mm
163	40 mm
164	Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
165	150 mm x 75 mm x 60 mm deep
166	150 mm x 150 mm x 60 mm deep
167	Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
168	5/6 Amp Switch
169	3 pin 5/6 amp socket outlet
170	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
171	Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
172	63 A TP&N
173	100 A TP&N
174	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
175	4 way (4 + 12), Double door
176	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
177	6 way , Double door
178	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
179	Single pole and neutral
180	Supplying and fixing brass batten/ angle holder including connection etc. as required.
181	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
182	Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
183	Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
184	Supplying of PVC Junction box2way, 3 way and 4way
185	Supply of PVC Bend 20mm /25mm
186	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
187	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
188	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
189	Supplying of 4\"-40 watt Decorative single box type tubefitting with all accessories as required
190	Supplying of 2\" - 20 watt Single Box type flourescent tube fitting complete asrequired
191	Supplying of exhaust fan of 300/380 mm sweep
192	Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
193	Supplying & fixing of 4\"-40\" watt flourescent tube.
194	Supplying & fixing of 100/60 watt incandescent lamp.
195	Providing 15A, five in one switch socket combined.
196	Supplying of Bakelite round sheet 4\" diameter
197	Supplying of PVC flexible pipe of 1\" diameter
198	Suppying of 18 SWG PVC insulated Copper earthing wire
199	Supplying and Providing of Celingfan
200	Supplying of Al. Thimble of following sizes :-
201	35 sqmm
202	95 sqmm
203	Drill Bit of size 1/2\"
204	Supplying of Machine Screw of sizes:-
205	1x1/2\"
206	3/4\"
207	1\"
208	Supplying of Machine Screw with Nut of size 2\" length
209	Supplying of white coloured brass washer
210	Supplying of Nuts & Bolts of 1\" length
211	( C) \"SUB-HEAD -III(EARTHING)
212	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
213	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
214	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
215	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
216	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
217	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
218	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
219	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
220	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
221	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
222	SH:-Septic Tank
223	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
224	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
225	a) Foundations and plinth
226	Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
227	a) Foundations and plinth
228	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
229	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
230	a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
231	Centring and shuttering including strutting, propping etc and removal of form work for :
232	a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
233	b) Lintels, beams, girders, bressumers and cantilevers etc.
234	Reinforcement of RCC work including bending, binding and placing in position complete.
235	a) Cold twisted steel bars.
236	Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
237	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
238	20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
239	Neat cement punning.
240	Providing and fixing sand cast iron single equal plain junction of required degree.
241	a) 100 x 100 x 100 mm
242	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
243	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
244	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
245	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
246	a) 100 mm dia SW pipes
247	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
248	a) 100 mm dia SW pipes
249	SH : Type-II
250	EARTH WORK
251	Earth work in excavation in foundationtrenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
252	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
253	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
254	CONCRETE WORK
255	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
256	a) Foundations and plinth :
257	Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
258	Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
259	RCC WORK
260	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
261	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
262	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface
263	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
264	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
265	a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
266	Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement:2 coarse sand : 4 stone aggregate 20 mm nominal size).
267	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
268	Centring and shuttering including strutting, propping etc and removal of form work for :
269	a)Foundation, footings, bases of columns etc. and mass concrete.
270	b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
271	c) Column, pillars, posts and struts etc.
272	d) Lintels, beams, girders, bressumers and cantilevers etc.
273	Reinforcement of RCC work including bending, binding and placing in position complete.
274	a)Tar/ TMT steel
275	BRICK WORK
276	Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
277	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
278	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
279	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
280	WOOD WORK
281	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
282	Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
283	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
284	a) 38 mm thick best available local wood, class - B I
285	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
286	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
287	a) Ornamental grill.
288	: IRON FITTINGS :
289	Providing and fixingAluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
290	a)300 x 16 mm
291	Providing and fixing Aluminiumtower bolts (barrel type) with necessary screws etc complete.
292	a) 250 x 10 mm
293	b) 150 x 10 mm
294	Providing and fixing Aluminium handles with necessary screws etc complete.
295	a)125 mm
296	b) 100 mm
297	Providing and fixing MS Hooks and Eyes.
298	a) 150 mm
299	Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
300	Timber class A-IV
301	Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
302	STEEL WORK
303	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
304	Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
305	Providing and fixing bolts up to 300 mm in length including nuts and washers complete
306	FLOORING
307	Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
308	a) Size of Tile 1000x1000 mm
309	Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
310	a) Size of Tile 1000x1000 mm
311	White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
312	Chequeredterrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
313	ROOFING
314	Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
315	a) 0.63 mm thick GI sheet
316	Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
317	a) 0.63 mm thick GI sheet
318	Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
319	: CEILING :
320	Providing and fixing 12 mm thick insulated boardceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
321	Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
322	a) Best local approved quality wood.
323	Extra for making chamfered edges of beading.
324	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
325	b) 100 mm diameter pipe
326	Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc
327	b) 100 mm diameter pipe
328	Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
329	A C.I Plain bend
330	b) 100 mm diameter pipe
331	B) C.I head flat or corner type bend
332	b) 100 mm diameter pipe
333	FINISHING
334	15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
335	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
336	Applying one coat of cement primer of approved brand and manufacture on wall surface.
337	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
338	Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
339	Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
340	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
341	Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
342	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
343	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
344	Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new workincluding an under coat of flatting varnish with glue sizing.
345	Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
346	Painting two or morecoats on GI sheetswithsuperior ready mixedpaint of approved brand and manufacturein white,grey or green shades on new work to give an even shade
347	DRAINAGE
348	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
349	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
350	a) 100 mm dia SW pipes
351	b) 150 mm dia SW pipes
352	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
353	a) 100 mm dia SW pipes
354	b) 150 mm dia SW pipes
355	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
356	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
357	WATER SUPPLY
358	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
359	a) 15 mm nominal bore
360	b) 20mm nominal bore
361	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
362	a) 25 mm nominal bore
363	Providing and fixing brass bib cock of approved quality.
364	a)15 mm nominal bore
365	b)20mm nominal bore
366	Providing and fixing brass stop cock of approved quality.
367	a) 15 mm nominal bore
368	b) 20 mm nominal bore
369	Providing and fixing PVC connection pipe with brass union.
370	A) 30 cm length
371	a) 15 mm nominal bore
372	Providing and fixing non-return valve of approved quality.
373	a) 25 mm nominal bore
374	Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.
375	a) 15 mm nominal bore
376	b) 20 mm nominal bore
377	Providing and filling sand all round GI pipes in external work.
378	a) 25 mm nominal bore
379	SANITARY INSTALLATION
380	Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
381	a) WC pan with white plastic seat and lid.
382	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
383	a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
384	Providing and fixing kitchen sink including making all connection excluding cost of fittings.
385	a) White glazed fire clay sink size 600x450x150 mm
386	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
387	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
388	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
389	Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
390	b)100 mm dia
391	Providing and fixing sand cast iron heel rest sanitary bend.
392	a) 100 mm dia
393	b) 50 mm dia
394	Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete.
395	a) 100 x 100 x 100 mm
396	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
397	b) 100 mm inlet and 75 mm outlet
398	Internal Electrification for Type-II Quarters
399	(A)SUB HEAD-I( WIRING)
400	Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRPVCinsulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S.box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
401	Group \"A\"
402	Group \"B\"
403	Group \"C\"
404	Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
405	Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
406	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
407	2 x 2.5 mm² + 1 x 2.5 mm² earth wire
408	2 x 4.0 mm² + 1 x 4.0 mm² earth wire
409	(B) SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
410	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
411	32 mm
412	40 mm
413	Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
414	150 mm x 75 mm x 60 mm deep
415	150 mm x 150 mm x 60 mm deep
416	Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
417	5/6 Amp Switch
418	3 pin 5/6 amp socket outlet
419	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
420	Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
421	63 A TP&N
422	100 A TP&N
423	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
424	4 way (4 + 12), Double door
425	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
426	6 way , Double door
427	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
428	Single pole and neutral
429	Supplying and fixing brass batten/ angle holder including connection etc. as required.
430	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
431	Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
432	Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
433	Supplying of PVC Junction box2way, 3 way and 4way
434	Supply of PVC Bend 20mm /25mm
435	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
436	Installation of ceiling fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
437	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
438	Supplying of 4\"-40 watt Decorative single box type tubefitting with all accessories as required
439	Supplying of 2\" - 20 watt Single Box type flourescent tube fitting complete asrequired
440	Supplying of exhaust fan of 300/380 mm sweep
441	Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
442	Supplying & fixing of 4\"-40\" watt flourescent tube.
443	Supplying & fixing of 100/60 watt incandescent lamp.
444	Providing 15A, five in one switch socket combined.
445	Supplying of Bakelite round sheet 4\" diameter
446	Supplying of PVC flexible pipe of 1\" diameter
447	Suppying of 18 SWG PVC insulated Copper earthing wire
448	Supplying and Providing of Celingfan
449	Supplying of Al. Thimble of following sizes :-
450	35 sqmm
451	95 sqmm
452	Drill Bit of size 1/2\"
453	Supplying of Machine Screw of sizes:-
454	1x1/2\"
455	3/4\"
456	1\"
457	Supplying of Machine Screw with Nut of size 2\" length
458	Supplying of white coloured brass washer
459	Supplying of Nuts & Bolts of 1\" length
460	(C) \"SUB-HEAD -III(EARTHING)
461	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
462	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
463	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
464	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
465	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
466	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
467	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
468	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
469	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
470	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
471	SH:-Septic Tank
472	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
473	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
474	a) Foundations and plinth
475	Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
476	a) Foundations and plinth
477	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
478	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
479	a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
480	Centring and shuttering including strutting, propping etc and removal of form work for :
481	a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
482	b) Lintels, beams, girders, bressumers and cantilevers etc.
483	Reinforcement of RCC work including bending, binding and placing in position complete.
484	a) Cold twisted steel bars.
485	Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
486	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
487	20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
488	Neat cement punning.
489	Providing and fixing sand cast iron single equal plain junction of required degree.
490	a) 100 x 100 x 100 mm
491	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
492	a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
493	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
494	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
495	a) 100 mm dia SW pipes
496	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.
497	a) 100 mm dia SW pipes
498	SH : Type-III
499	EARTH WORK
500	Earth work in excavation in foundationtrenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Arunachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of 8 Nos. Of Quarters For Staff Of Gyawepurang Co Hq., East Kameng-Arunachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of 8 Nos. Of Quarters For Staff Of Gyawepurang Co Hq., East Kameng-Arunachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us