Public Works Department-PWD has published Tender For Conversion Of Existing Building Into Dna Laboratory At Ist Floor Of Fsl, Jammu (Under Nirbhaya Fund By The Central Govt. Of India). Submission Date for this Tender is 11-03-2024. Building Work Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge in cement mortar. |
| 4 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge. 1:3:6 or richer mix (i/c equivalent design mix). |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 7 | 12mm Cement plaster of mix 1 : 6 (1 cement : 6 coarse sand). |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles. |
| 11 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns). |
| 12 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminum (minimum thickness of powder coated 50 microns). |
| 13 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm). |
| 14 | Providing and fixing of ACP sheets for Cabins, Partition of branded quality as per direction of Engineer-in-charge (Complete job). |
| 15 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 16 | Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum tabular handle bar. |
| 17 | Providing, fixing and installing Digital door lock for toughened glass door shutter (Godrej) or equivalent make as approved by E.I.C (Complete job). |
| 18 | Providing and fixing of Zebra blinds of approved colour made from 100% polyester yarn coated with fade resistant polymer to ensure complete opaquely with zero light transmittance having suitable grating an exterior, including all fixtures and fittings complete in all respect as per design and instruction of the E.I.C (complete job). |
| 19 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 20 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. |
| 21 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 22 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. |
| 23 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 250x16 mm. |
| 24 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x10 mm. |
| 25 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm. |
| 26 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm. |
| 27 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm. |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid. |
| 29 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. Range of two half stall urinals with 5 liter P.V.C automatic flushing cistern. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 31 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 32 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. |
| 33 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore. |
| 34 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 40mm dia. |
| 36 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 37 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 38 | Stainless steel grating 100mm dia. |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes. |
| 40 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge. 100mm nominal size dia. |
| 41 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 42 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre. |
| 44 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm. |
| 45 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm. |
| 46 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110mm bend. |
| 47 | Engaging Plumber as per requirement of site. |
| 48 | Engaging Electrician / Carpenter / Welder as per requirement of site. |
| 49 | Engaging labour as per requirement of site. |
| 50 | Engaging tractor with trolley for disposal of mulba, unhygenic material away from site as per direction of Engineer-in-charge. |
| 51 | Supply of discontinious line insulated Wall and Ceiling PUF Panel of Pre-Painted insulated PUF Panel made up of PPGI Prepainted Galvanized Iron Sheet on both sides to be insulated with in filled PUF of density 40 kg/m3. Colour : RAL-9002 Panel thickness 40mm Sheet thickness 0.6mm. |
| 52 | Installation of discontinious line insulated Wall and Ceiling PUF Panel of Pre-Painted insulated PUF Panel made up of PPGI Prepainted Galvanized Iron Sheet on both sides to be insulated with in filled PUF of density 40 kg/m3. Colour : RAL-9002 Supporting Flashing and Accessories L-Flashing U-Channel Silicon Rivit & Nuts Bolts (Included) Panel thickness 40mm Sheet thickness 0.6mm. |
| 53 | Supply of 48mm thick Single Door Leaf of 120 min fire rated conforming to BS-476, Part-22 and IS : 3614 Part-II ; fabricated with 2 Nos. of 0.8mm thick galvanized steel sheet sandwiching honeycomb materials in between. Door frame are manufactured with 1.2mm thick galvanized steel sheet pressed to form double rebate profile of size 143x60mm. The frame and shutter are finished with power coated. ACC-1-202 grade SS bearing hinges (100x75x3mm), 2-Door closer (Standard Arm), 3-Vision Glass Panel (400x600x5)mm , 4-Dead Lock (Yale), 5-SS D Type Handle (Yale), 6-Tower Bolt (Doorset/Garg) Not Req, 7-Automatic Drop Seal (Enviro/Reputed Brand). 8 DOOR COLOR OFF WHITE RAL 9002. |
| 54 | Supply of 48mm thick Single Door Leaf of 120 min fire rated conforming to BS-476, Part-22 and IS : 3614 Part-II ; fabricated with 2 Nos. of 0.8mm thick galvanized steel sheet sandwiching honeycomb materials in between. Door frame are manufactured with 1.2mm thick galvanized steel sheet pressed to form double rebate profile of size 143x60mm. The frame and shutter are finished with power coated. ACC-1-202 grade SS bearing hinges (100x75x3mm), 2-Door closer (Standard Arm), 3-Vision Glass Panel (400x600x5)mm , 4-Dead Lock (Yale), 5-SS D Type Handle (Yale), 6-Tower Bolt (Doorset/Garg) Not Req, 7-Automatic Drop Seal (Enviro/Reputed Brand). 8 DOOR COLOR OFF WHITE RAL 9002. |
| 55 | SITC of extruded PVC Coving for wall to wall, Wall to Ceiling Panels shall be properly covered with R-50, R-75, 90 oso, that there is noany dust deposition in the joint, Corner internal cove jointing place shall be property sealed with silicon selant PVC Coving with L-Flashing. |
| 56 | Clean Room Flash Vision Window Size 1000 x 1000mm with Double Glass in the PPGI Wall complete work. |
| 57 | Providing and fixing of Foor Interlocking System shall be complete with controller module Push Button stations with LED indication electromagnit locks for 4 doors. |
| 58 | Supply and forming of Epoxy Coving with 65mm RED/US Wall to floor. |
| 59 | Providing / applying Hybrid cementrian Epoxy blend resin 3mm thick Epoxy flooring system having high impact and abrassion properties make fibex make on the surface 1. Prapare and clean the surface / sub strate which include removal of latiance, lose material all curing compounds from release agents oil or contaminants by gravelling the surface. Apply water based self levelling Epoxy cement composit screw fib floor cem. @ 3 kg/sqm for 2mm thickness over primed surface having compressive strength 60mpa as per ASTM all complete job. |
| 60 | C-Frame - Standing -Size L-705 x H-880 x D-30 mm, made of 60x30 mm pipe of 2 mm thickness |
| 61 | Connecting Set of L- 1350 mm for Standing height C Frame Structure. |
| 62 | Connecting Set of L- 1200 mm for Standing height C Frame Structure. |
| 63 | Connecting Set of L-850 mm for C Frame Structure. |
| 64 | Connecting Set of L-750 mm for Standing height C Frame Structure. |
| 65 | Connecting Set of L-600 mm for Standing height C Frame Structure. |
| 66 | Connecting Set of L-450 mm for Standing height C Frame Structure. |
| 67 | Corner Sink Storage Size-L-850+850xD-530xH-635mm, 1 Shutter. |
| 68 | Corner Storage Size-L-850+850xD-530xH-635mm, 1 Shutter. |
| 69 | Storage Size-L-750xD-530xH-635mm, 1 Drawer + 2 Shutters. |
| 70 | Sink Storage Size-L-750xD-530xH-635mm, 2 Shutters. |
| 71 | Storage Size-L-600xD-530xH-635mm, 1 Drawer + 2 Shutters. |
| 72 | Sink Storage Size-L-600xD-530xH-635mm, 2 Shutters. |
| 73 | Storage Size-L-450xD-530xH-635mm, 1 Drawer + 1 Shutter, Right hand side. |
| 74 | Legspace -750 mm with BACK COVER PLATE |
| 75 | Legspace - 600 mm with BACK COVER PLATE |
| 76 | End Cover panel for 750mm Counter Depth, with Standing Height |
| 77 | Space Filler |
| 78 | PP Drop in Sink, Polypropylele, Size L-560 x W-355 x D-245 mm with Sink Outlet Nipple complete with Bottle-trap and Hose Pipe. |
| 79 | Three Way Spout with Swivel Swan Neck |
| 80 | Single Sided CRCA Electrical Raceway max L-2m, H-100 x D-75mm Top/Wall Mounted with 3 Nos. 6 Module Cut-outs. |
| 81 | Reagent Shelf 2 Tier, Size L-1200 x D-300 x H-650mm. |
| 82 | Set of 5A-1 No. & 15A-1No., Switches & Sockets with Face Plate (ANCHOR ROMA / NORISYS) without wiring. |
| 83 | Open type Storage Rack of Size L-910 x D-400 x H-2100mm, made in 40x40x1.5mm solid sheet angle & Shelves in 0.8mm thickness with stiffener, duly powder coated (6 Adjustable shelves, making 5 compartments). |
| 84 | Prepolished Jet Black Granite 17+1 thick mm with Chamfered Corners. |
| 85 | Underneath Packing (For Granite, 6mm x 30mm NEOPRENE). |
| 86 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 87 | Stone agg. / Sand for an avg. lead of 20 Kms. |
| 88 | Bricks for an avg. lead of 20 Kms. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
