|
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding towall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling Asbestos cement (corrugated and semi-corrugated etc sheet) in roof coverings complete all as specified and directed. |
| 5 | M&L6 mm thick asbestos cement, corrugated or semi-corrugated sheet fixed with coach screw in roofs walls etc complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. |
| 7 | Demolition of brick work in cement mortar incl all quions, arches,pillers etc, but excluding ashlar facing, dressed stone work and precast concrete articles. |
| 8 | M&L brick work with sub class \"B\" bricks straight or curved on plan exc. 6 M mean radius built in CM 1:4 complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in CM 1:4 on onother than fair faces of brickwork or concrete surafaces complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surface and applying 02 two coat of oil bound distemper over a coat of alkali resistant primery complete all as specified and as directed. |
| 11 | M&L for preparation of newly plastered surface and applying two coat ofAcrylic Smooth exterior paint of required shade (Camouflage) applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturer instruction. |
| 12 | Demolition of Cement concrete (unreinforced) of any description and in any position, surface channels not otherwise specifically provided for complete all as specified and directed |
| 13 | M&L for providing cemnet concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, surface channnel of drains, bed plates including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 15 | Taking down unserviceable rolling shutters/sliding gates for repairang necessary greasing and replacement of UNSV portion like anchoring road, ball bearing, shutter etc and re fixing same openingcomplete all as specified and directed. Note:- Spare parts required shall be measured and paid for separately under relevant item as Supply only. |
| 16 | Supply only mild steel round bars Fe 410-W (Gde-E- 250) quality-A, in available lengths complete all as specified and directed. |
| 17 | SupplyonlyBall bearing for rolling shutter complete all as specified and directed |
| 18 | S&F steel rolling shutters of 1.25 mm thick without ball bearing as specified including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated push pull or manual type |
| 19 | S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 20 | M&L for preparation of new or previously untreated steel surfacess of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | M&L for preparation of old steel surfacess of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 23 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement conforming to Fe-290 (Grade E-165) complete all as specified and directed. |
