|
| 1 | 11/0.4 KV, 250 KVA S/Stn. |
| 2 | Prov.Distribution Transformer (Ordinary), 250 KVA, 11/0.4 kV |
| 3 | Prov.Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) |
| 4 | Prov.Muffs with concerete filling |
| 5 | Prov.X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line |
| 6 | Prov.MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA\"s |
| 7 | Prov.X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 8 | Transformer Bed, Belting & Knee Bracing |
| 9 | X-Arm:[Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]forTransformer Bed |
| 10 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] |
| 11 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 12 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
| 13 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
| 14 | Transformer LT Distribution Box and GO Switch fixing Assembly |
| 15 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 16 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
| 17 | GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm |
| 18 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 19 | D.O Fuse Unit |
| 20 | Surge Arrester, 9 kV Station Class(Porcelain Type) |
| 21 | Discs insulator sets (comprising 1No.Disc(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 22 | Stay set complete |
| 23 | Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) |
| 24 | Pipe Earthing Set |
| 25 | LT Distribution Panel Box with MCCB 400 amp 3P 50kA -1 No., Make L&T,Schneider and ABB only, MCCB 250 Amp 36 kA 3P of L&T Schneider and ABB make only- 3 Nos for 250 KVA DTR |
| 26 | Half Clamp (M.S. Flat 50X6 mm) |
| 27 | Full Clamps (M.S. Flat 50X6 mm) |
| 28 | Nuts and Bolts of Various Sizes(with flat and spring washers)] |
| 29 | Aluminium Thimble |
| 30 | Aluminium Thimble |
| 31 | Danger Plate |
| 32 | Barbed Wire |
| 33 | LT XLPE Cable (3.5 Core) 120 mm² |
| 34 | Aluminium Paint. |
| 35 | Red Oxide |
| 36 | Prov.AAAC 7/3.15mm² Conductor for Earthing |
| 37 | Prov. plinthand Fencing for double pole 250 KVA S/Stn. |
| 38 | CT-PT Unit Belting & Knee Bracing |
| 39 | X-Arm:[Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]for CT-PT Unit |
| 40 | X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of CT-PT Unit] |
| 41 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 42 | MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos |
| 43 | MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing |
| 44 | Prov. CT/PT combined unit 15 KV /110V 25/5 A |
| 45 | Prov.Energy Smart Meter 11 KV HT -/5 Amps |
| 46 | PVC Multistrand 4 mm² copper wire with F-1 inch GI pipe for concealing |
| 47 | Transportation Charges |
| 48 | Erection Charges complete in all respect |
| 49 | 11 KV HT Line |
| 50 | Prov AAAC 7/3.81mm² Conductor (80mm²) {Includes Cutting and wastage} |
| 51 | Steel Tubular Poles (11 m, Working Load > 200 kgf/m²) |
| 52 | Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) |
| 53 | Muffs with concerete filling |
| 54 | Run Thro\" Structures (? Formation): on Single Pole Structures (Adopt Eight (8) No. Run-through Structures per Km) - |
| 55 | Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) x 8 structure |
| 56 | Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures |
| 57 | Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] |
| 58 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per polestructure |
| 59 | HT Stay / Guy Arrangement |
| 60 | Stay set complete in all respect (1No. / Single Pole , 4 No. / Double Pole Structures) |
| 61 | Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) |
| 62 | Earthing |
| 63 | HT Earthing set complete |
| 64 | Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
| 65 | Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] {0.102 kg/m} |
| 66 | Eye Hook for earth wire |
| 67 | Earth Wire Clamp |
| 68 | MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing |
| 69 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting GO switch |
| 70 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
| 71 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type |
| 72 | Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro\" structure: 2 No ] |
| 73 | Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro\" structure: 2 No] |
| 74 | Danger Plate (250X200X1.6 mm) |
| 75 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
| 76 | Barbed Wire |
| 77 | Red Oxide |
| 78 | Aluminium Paint |
| 79 | Transportation Charges |
| 80 | Erection Charges complete in all respect |
| 81 | Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. |
