Rural Engineering Department has published Tender For Establishment Of Processing Unit And Packing House Of Amla Production In District Pratapgarh. Submission Date for this Tender is 07-03-2024. Building Work Tenders in Prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in Foundation in Ordinary soil i/c 1.5m lift and 30m lead etc requard for proper completion of Work. PWD 251 |
| 2 | E/W filling in embankment in Ordinary soil i/c all Completion of Work upt to plint level but one Km cartage extra. PWD.253 |
| 3 | Cement Concrete with 4cm. Gauge approved stone ballast coarse sand 2.5FM & Cement in 8:4:1 including supply of all materials, labour, Tools and plants etc required for proper completion of the work. SI. No.281 |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, dressing etc. rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. SI. No 255 |
| 5 | Providing & injecting chemical emulsion for Preconstructional antitermite treatment. Requiredforpropercompletionof work. PWD-361 SOR (2015) |
| 6 | RCC Works door sills, chaukhats, boundry posts, shelves and similar small work with cement, approved coarse sand 2.5 F.M. and 2 cm. Gauge stone grit in proportions of 1:2:4 excluding cost a rainforcement & its bending but including its fixing and binding the same with 24 B.W.G.G.I. fixing Binding wire and including the cost of binding wire, moulds, all other materials, labour, T&P etc required for proper completion of the work including cost of binding wire.PWD-282 |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Havier Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-285 |
| 8 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-284 |
| 9 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-287(A) |
| 10 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 incolumns excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 PWD-289 |
| 11 | M.S. (for steel or plain) in plain work such as RCC or R.B. work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. PWD 504 |
| 12 | Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. PWD-303 |
| 13 | Providing cement concrete floor with 1:2:4 cement, approved coarse sand and 2 cm. (1") graded approved stone grit laid in panels finished with 3mm (1/8") folating coat including supply of all material, labour and tools & plants et required for proper completion. PWD-601 |
| 14 | Brick work in super-structure above plinth level up to floor two level (up to two storeys) includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall 230mm thick to (1:6 cement & coarse sand). PWD 303+309+ 310 (Analysis) |
| 15 | 12mm thick plaster with cement and fine sand mortar 2.25 fineness modulus mortar in 1:6 add over rough face of one brick thick wall including supply of all materials, labour, Tools and plants etc. required for completion work PWD- 597(D+E) |
| 16 | 12mm thick plaster with cement and fine sand mortar 2.25 fineness modulus mortar in 1:6 including supply of all materials, labour, Tools and plants etc. required for completion work PWD- 597(D) |
| 17 | Add for plaster drip lines in plastered surface or moulding to facingPWD-598 |
| 18 | M.S. (for steel or plain) in plain work such as angle ironDoor and window frame work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. PWD 503(A) |
| 19 | M.S.or Iron work of small sizes and section such as includingdown bolts, hold fast, tie rod grading work wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. PWD 502 |
| 20 | Fabrication of 2 section fixed / open able steel windows as necessary including bending for proper completion of the work and including supply of all steel & wastage and over lapping and hooks. PWD 503(A) |
| 21 | Fabrication of window/Fixed GrillPWD 503(A) |
| 22 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading DSR 9.51.2 |
| 23 | Fixing of Door/Window frame in position i/c all.S.No 10.20 As per Schedule-2015 Door Chaukhat |
| 24 | Fixing of Door/Window frame in position i/c all.S.No 10.20 As per Schedule-2015 Window Chaukhat |
| 25 | Fixing of Door/Window frame in position i/c all.S.No 10.20 As per Schedule-2015 Veintilator Chaukhat |
| 26 | Supply and fixing of fully pannelled of commercial quality ISI marked ply wood flush shutters 32mm thick including all complete. PWD-470 |
| 27 | Providing and fixing ISI marked oxidised M.S. sliding door bolts nuts and screws etc. complete with.250x16mm (DSR-9.62.2 |
| 28 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete 250x10mm (DSR-9.63.1) |
| 29 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (DSR-9.66.1) |
| 30 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (PWD 649+651) |
| 31 | Finishign wall with water proof cement paint of approved make and quality on new work with two coats to give an even shade inculding supply of all materials, labour, tools and plants etc. complete PWD 660+661 |
| 32 | Painting of varnishing new work in small areas or new wood work with one coat (upto one Sq.mt.) of ready mixed priming quality ready mixed paint or varnish including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (PWD 641) |
| 33 | Painting of varnishing new work in small areas or new wooden surface every coat on preveous sly painted of ready mixed priming quality ready mixed paint or varnish including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (PWD 643) |
| 34 | 2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand of 2.5 FM and 2cm graded approved stone grit without base concrete with neat cement. .PWD-601(A) |
| 35 | 2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand of 2.5 FM and 2cm graded approved stone grit without base concrete with neat cement. .PWD-601(A) |
| 36 | 20mm thick ceemnt plaster in dado / skirting in 1:2 consisting of one part of ceemnt & two part of approved course sand laid in penelsfinished with 3mm floating coat ofeat ceemnt or ceemnt mixed with marble dust in ratio of 5:1 including suooly of all materias labour T&Petc. required for proper completion of the work PWD-597 |
| 37 | Supply and fixing 6mm (1/4") creamic glazed floor tiles in flooring or in skirting or dadao laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools & supply of all materials, labour and tools & plants etc required for proper completion of the work..PWD-628 |
| 38 | Supply and fixing 6mm (1/4") creamic glazed floor tiles in flooring or in skirting or dadao laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools & supply of all materials, labour and tools & plants etc required for proper completion of the work..PWD-628 |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. with Electric resistance or induction butt welded tubes DSR 10.16.3 |
| 40 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during ransportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 12.50 |
| 41 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. With 0.80 mm thick with zinc coating not less than 275 gm/m²DSR 12.7.1 |
| 42 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. With0.63 mm thick with zinc coating not less than 275 gm/m²DSR 12.7.2 |
| 43 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.with110 mm diameter DSR 12.41.2 |
| 44 | Supplying & fixing rolling shutters of approved make made of 80x1.25mm (3"x18 GAUGE) cold rolled M.S. lath inter locked thoughout their entire length and joined together at the end of end locks and mounted side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top of cover and springs.Roling Shutter PWD-520 |
| 45 | Supplying & fixing rolling shutters of approved make made of 80x1.25mm (3"x18 GAUGE) cold rolled M.S. lath inter locked thoughout their entire length and joined together at the end of end locks and mounted side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top of cover and springs.Spring Wire PWD-521 |
| 46 | Supplying & fixing rolling shutters of approved make made of 80x1.25mm (3"x18 GAUGE) cold rolled M.S. lath inter locked thoughout their entire length and joined together at the end of end locks and mounted side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top of cover and springs.Top Cover PWD-522 |
| 47 | Ball Bearing PWD-523 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
