Military Engineer Services-MES has published Tender For Special Repair To Bldg No T-11 Of 488 (I) Supl Pl Asc Gaya And Provn Of Aluminum Partition And Ancillaries, Misc Work Items Along With Staging With Granite Top At Religious Institute Of Mh Gaya At Mil Stn Gaya. Submission Date for this Tender is 28-03-2024. Building Work Tenders in gaya Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Mar-2024 | BOQ Corrigendum | BOQ | 21-03-2024 |
| 2 | 21-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above GL |
| 2 | M & L for providing PCC type B0, 1 : 2 : 4, (using 12.50 mm graded aggregate) as incoping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC. |
| 3 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc. |
| 4 | M & L for rendering 15mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete. |
| 5 | M & L for rendering 15mm thick in two layerson external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly |
| 6 | Supply only liquid water proofing compound (Make : Sika Latex Power) |
| 7 | M & L for 1 mm thick of Birlawhite putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings. |
| 8 | M & L for preparation of old plasteredsurfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed. |
| 9 | M & L for preparation of new plasteredsurfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed. |
| 10 | M & Ltwo coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new or old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. |
| 11 | M & Lone coat of cement base paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg complete all specified & directed. |
| 12 | Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises. |
| 13 | M & L for virified ceramic double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM 1:4 complete. |
| 14 | M & L for virified ceramic double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skitting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 10mm thickrendering bed or bedding layer with CM 1:4 complete. |
| 15 | M & L for non skid ceramic coloured tiles (square/ rectangular) polished, area of each tiles not less than 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including over 15 mm thick screed in CM 1:4 complete. |
| 16 | M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete. |
| 17 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc, dressed stone work and precast concrete article |
| 18 | M&L Brick work using sub class old bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 19 | Taking down chowkhat or frame n.exc 1.5 sqm (without taking off shutter) |
| 20 | Taking down chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm (without taking off shutter) and removing to store complete all as specified and directed. |
| 21 | S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the partition labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 22 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge. |
| 23 | S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete. |
| 24 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed by Engr-in-charge. |
| 25 | M & L for prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete. |
| 26 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 27 | M & L two coats of synthetic enamel painting on wooden surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 28 | S & F as in repairaluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 29 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165 |
| 30 | Dismantling of asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed. |
| 31 | S & F Prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed. |
| 32 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm (AZ-150) thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete. |
| 33 | Dismanteling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed |
| 34 | S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof Including anodised aluminium snap grid frame work for false ceiling all as specifiedcomplete all as specified. |
| 35 | M & L for 32 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc. |
| 36 | M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 37 | M & L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 38 | S & F Century PVC boards Starke prime thickness 8 mm with decoravtive century starline laminates gloss colour wenge brew 80675 G on front of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling and dismantling of existing old wall panelling all as specified and directed by Engr-in-charge. |
| 39 | S&f in repair 20-25mm bore cut to length as required stainless steel decorative draphery rods with brackets and decorative finails as required of colour as selected & directed by Engr-in-charge. |
| 40 | M & L for 15-18 mm granite slab(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 41 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed |
| 42 | M & L Brick work using sub class old size bricks straightor curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed. |
| 43 | M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in drain/ slabs, cantilever or supported on walls and small works like cubes etc. |
| 44 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
| 45 | -Ditto- all aper item no 44 above but 6 to8 mm dia, as in stirrups and spacers. |
| 46 | Taking down copper/aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 47 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 48 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 49 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed. |
| 50 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and makinggood disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 51 | (a) One light point controlled by one, one way switch 5 Amps |
| 52 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 53 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 54 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 55 | Description all as per item No 5 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 56 | S & F for switch piano type single pole 5 amp, 230 Volts complete all as specified and directed. |
| 57 | S & F for switch piano type single pole 15 amp, 230 Volts complete all as specified and directed. |
| 58 | S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. |
| 59 | S & F for socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed. |
| 60 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete. |
| 61 | S & F for stepped type electronic fan regulator flushType complete all as specified and directed. |
| 62 | S & Ffor lamp holder, PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 63 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 64 | M & L for replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 waywith 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 125 Amp capacity and 12 Nos+ 12 Nos out going MCB SP complete all as specified and directed. Havells/ L&T/Legrand Note: MCCB & MCB"s are measured and paid in separate items and same make. |
| 65 | S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 66 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 67 | S & Ffor MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 68 | S & F in replacement of MCCB 4 pole, 63 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed.Make :Havells/ L&T /Legrand |
| 69 | S & F for ceiling fan 230 Volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per BIS with necessary accessories with fan regulator and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed. |
| 70 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed |
| 71 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 72 | S & F LED ceiling light 36 watt LED(2x2 ft) warm white/cool day light, LED ceiling mounted merged square shaped slim width of the tile makes it seamlessly blend in with the ceiling space with geometric and aligned designed, the tile cane be arranged in symmetric and abstract way to make the ceiling a peice of art as complete fitting, including LED panel in white, 230 volt energysaving, enviromental friendly, long life, corrosion resistant, impact proof, IP-65luminaire with PC Housing in merged octagon shaped suitable for wet location, ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. |
| 73 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 74 | S & F for energy efficient exhaust fan of 350 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 75 | Taking down existing old Extg unserviceable LT UG/ service cable of any description and sizecomplete all as specified and directed. |
| 76 | 4 core x 25 Sqmm supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of sizecomplete all as specified and directed |
| 77 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
