University Of Pune-UOP has published Tender For Annual Repairs To Non-Residential Buildings At Savitribai Phule Pune University.(2024-25) Providing Brick Masonry Waterproofing Work Plastering Work Flooring Work Painting Work Roofing And Ceiling Work Doors And Windows Aluminum Partition Slid. Submission Date for this Tender is 12-03-2024. Shed Construction Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing planking from roof or ceiling and stacking them as directed with all leads and lifts etc. complete |
| 2 | Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete. |
| 3 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. |
| 4 | Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. |
| 5 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 6 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete |
| 7 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete |
| 8 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 9 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. |
| 10 | Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete. |
| 11 | Removing teak wood trellies work with frame including stacking the materials as directed with all leads, lifts etc. complete |
| 12 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 13 | Removing wire fencing with iron/ C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete. |
| 14 | Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete. |
| 15 | Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. |
| 16 | Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia and above. etc complete |
| 17 | Removing battens from roof and stacking them as directed with all leads and lifts etc. complete. |
| 18 | Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. |
| 19 | Removing rafters from roof including the materials as directed with all leads , lifts etc. complete. |
| 20 | Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete |
| 21 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete |
| 22 | Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete |
| 23 | Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. |
| 24 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for executionof all items for such works. |
| 25 | Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves 8 A boards etc and sacking the materials as directed with all leads and lifts complete. Including removing wood work below etc. complete. |
| 26 | Replacement of damaged Mortise Lock of approved quality and make to door shutter including Removing and Refixing with Necessary screw,making proper adjustment for smooth operation etc.complete as per sample approved by Engineer in-charge. |
| 27 | Replacement of damaged Aldrop 300mm Chromium plated of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge |
| 28 | Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge |
| 29 | Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete. |
| 30 | Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. complete. |
| 31 | Filling tiles joint portion offlooring and dado filling with white cement by removing existing loose morter/ cement slurry from joint with tools and finish with washing cleaning and curing etc. complete. |
| 32 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means |
| 33 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 34 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means |
| 35 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stackingas directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. ((Lift upto 1.50 m) By Mechanical Means |
| 36 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stackingas directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means |
| 37 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means |
| 38 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 39 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete |
| 40 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 41 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete |
| 42 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC withoutSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 43 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 44 | Providing and laying Cast insitu/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for bedblocks,foundation block sand such other items including bailingoutwater,Steelcentering,formwork,laying/pumping,compacting,roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc.complete.The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag,plastic,tarpaulinetc.(Wooden centering will not be allowed.),with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concreteBatch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 45 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 46 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap /granite/quartzite/gneiss metal for R.C.C.work in foundations like raft,strip foundations,grillage and footings of R.C.C.column sand steel stanchions etc.columns as per detailed designs and drawing or as directed including Steel centering formwork,cover blocks laying/pumping,compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete.(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible DrumType mixer/concrete Batch mix plant(Pan mixer)etc.complete.With fine aggregate(Crushed sand VSI Grade) |
| 47 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 48 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC withoutSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 49 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 50 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade |
| 51 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 52 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for .C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 53 | Providing Decorative cement concrete mould in M-25 concrete over top of column of size 450x450x300 as per drawing & design including plastering, finishing,cleaning etc. complete |
| 54 | Providing and laying insitu cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumen(excluding reinforcement)with coarse and fine aggregate(natural sand/ VSI grade finely washed crushed sand) etc. complete |
| 55 | Providing and laying insitu cement concrete M30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc.complete |
| 56 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 57 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete |
| 58 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete |
| 59 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. |
| 60 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges,locking arrangements and painting in three coats of oil paint of approved colour and shade etc.complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.)Spec.: As directed by Engineer- in-charge. |
| 61 | Providing structural steel work in hollow section of various thickness and sizes in square,rectanular and round shape from 25mm to 450 mm section as per IS4923YST310 Grade produced from iron ore and blast furnace route etc.as per detailed designs and drawing or as directed including cutting,fabricating,hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and paintingcomplete. |
| 62 | Extra for curvature/Bending of structural members.Spec. No: - As directed by Engineer in charge |
| 63 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement In mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 64 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complet |
| 65 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 66 | Providing fly ash brick masonry (Steam Cured)with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 67 | Providing fly ash brick masonry (Steam Cured)with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete |
| 68 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete |
| 69 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 70 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. |
| 71 | Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in external work of plinth including bailing out water manually, striking joints inside and watering etc.complete. |
| 72 | Providing expansion joints in R.C.C. framed structure (at terrace level) cleaning of the surface to remove dust, loose particles a) Providing and applying of Moisture insensitive epoxy putty - Sikagard 694 F(I)b)Providing and applying of Contape POE 900 with Epoxy Adhesivec)Providing and applying of Fosroc Thioflex 600 Gun Grade |
| 73 | Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete as directed |
| 74 | Providing leak proof treatment by Injection grouting method to old floor without removing tiles of W.C., bath, with cement sand proportion of 1:1.5 and waterproofing compound at 2 Kilogram/bag of cement mixed in 35 liters of water including drilling holes in required position grouting with above mixed solution and ceiling etc. complete |
| 75 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 76 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
| 77 | Providing internal cement plaster 6mm thick in a single coat in cement mortar1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 78 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 79 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete |
| 80 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete |
| 81 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete |
| 82 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. |
| 83 | Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. |
| 84 | Providing fine cement finish 1.5mm thick over green plaster surface including scaffolding curing etc.complete. |
| 85 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 86 | Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.Spec. No.: As directed by Engineer in Charge. |
| 87 | Providing and applying laying Aggregate plaster in granite/marble stones,as decorative finish to give granite/marble like appearance to concrete,brick or block surfaces in all position including preparation of surface smoothly,evenly by racking of joints incase of Brick or block work including backing layer of 12mm thick with cement mortar1:3 with 2% integral cement waterproofing compound,roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder,applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing thesurface for two days including al materials and labour etc. complete |
| 88 | Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material of Ambuja / Mor Chap or equivalent make ) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. |
| 89 | Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete |
| 90 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. |
| 91 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete |
| 92 | Providing Ashlar Stone Masonary ( First ) work in cement morter 1:4 with watering as shown in drawing & design with all necessary including scaffolding etc. complete.NDSR, Spec; as diretced by engineer in charge. |
| 93 | Removing and refixing existing ashlar coping in C:M 1:5 Mortor etc. completed -NDSR |
| 94 | Cleaning the external surface of walls using steripure S30 to remove algae, fungus growth, flakes of stones including double scaffolding, as directed by Engineer Incharge etc. complete. |
| 95 | Raking out joints & pointing of stone masonry /cladding filling the gap with lime mortar in proportion 1:1:5 i.e.. White cement : lime : stone dust with required qty. of water pigments to match existing sheds and texture of stone including double scaffolding, cleaning the crack or joints or as directed by Engineer Incharge etc. complete. |
| 96 | Provding and fixing the great indian Baslat stone cladding of various sizeand having thickness of 15 to 18 mm (+,-2mm with top surface hammertone effect abd back side surface calibrated effect for better grip etc. completed. including all required material for fixing with adhesive , scaffolding, labour as per details drawing and design. spec. As per directed by Engineer in-charge. |
| 97 | Providing and applying approved silicon silaxane coating to existing stone masonry façade against fungus, moss growth including double scaffolding, curing, cleaning etc. complete. |
| 98 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. |
| 99 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 100 | Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 101 | Providing and laying cemen concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction,fillingjoints,marking lines to give the appearance oftiles of 30cmx30cm or other size laiddiagonally/squareetc.finishing smooth(with extra cement)in any colour as directed and curing etc. complete. With Crushed Sand |
| 102 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 103 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.. |
| 104 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 105 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 106 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 107 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring |
| 108 | Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting |
| 109 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 110 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete |
| 111 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish |
| 112 | Providing and fixing 1.5 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete |
| 113 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 114 | Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. b) Skirting Spec. No.: Bd.M. 12 Page No.385 |
| 115 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 116 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 117 | Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 118 | Providing and laying vitrified rustic matt stone finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. complete. b) Skirting Spec. No.: Bd.M.12 Page No. 385 |
| 119 | Providing & laying Pavit make tiles havingsize 300mm x 300 mm of15 mm thickness of approved shade & pattern for flooring in required position laid on a bed of 1:4 cement morter including neat cement float ,filling joints,curing & cleaning etc.complete. |
| 120 | Providing & lying Pavit / Johnson Endura/AGL make matt finish tiles havingsize 600mm x 600 mm of15/16 mm thickness of approved shade & pattern for floorimg in required position laid on a bed of 1:4 cement morter including neat cement float ,filling joints,curing & cleaning etc.complete. Spec. As directedby engineer in- charge |
| 121 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) |
| 122 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 80 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) |
| 123 | Fixing heavy duty inter locking concretePAVING BLOCKS of 60 millimeter thicknesssupplied by SPPU(using 100% crushed sand) Spec. No.: Bd. M-12 page No. 385 -Labour Rate Only |
| 124 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 125 | Machine polishing to cement/marble mosaic tiled flooring or any other type of flooring including cleaning, washing, etc. complete. |
| 126 | Providing and filling crack filling material to conealed existing crackat any location by Dr. Fixit crack filler |
| 127 | Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed |
| 128 | Providing and applying french polish to new wood work, for required finishing including.knotting, preparing the surfaces, scaffolding etc. complete as directed |
| 129 | Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. |
| 130 | Providing and applying PU polish exterior grade of required ( Matt/Glossy) finish to the wood work by spray machine including knotting and preparing the even surface by sanding and scraping of existing polish/paint of doors & windows including frame work to get original or as directed including scaffolding & dent filling with filler over the dented area etc. complete. |
| 131 | Providing and applying 2coats of alluminium paint of approved make to new structural steel work in building sand workshops including scaffolding if necessary,cleaning and preparing the surface(excluding primer coat)etc. complete |
| 132 | Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete |
| 133 | Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 134 | Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete. |
| 135 | Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc.complete |
| 136 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 137 | Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.complete |
| 138 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete |
| 139 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 140 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 141 | Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area.wall primer with brush by adding mineral turpentine oil by 8to10% or water by 15to20% allowing to dry for 6to8 hours After applying acrylic wall putty with appropriate proportion of water of allow to dry for period of 4to6 hours of activity.Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40to45% or 65to70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40to45% or 65to70% by roller. |
| 142 | Providing and fixing Indian teak wood plank ceiling 20 mm thick plain underside tongued and grooved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete. |
| 143 | Providing and fixing Indian teak wood framed collar beam / king post / queen post truss, with all Iron work including scaffolding, if necessary, and one coat of primer etc. complete. |
| 144 | Providing and fixing country teak wood common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including scaffolding, if necessary, all iron work and one coat of primer etc. complete. |
| 145 | Providing and fixing Indian teak wood eaves boards 15 cm wide and 25 mm thick plain decorative type including scaffolding and painting with two coats etc. complete. |
| 146 | Providing and fixing country teak wood barge board 22 cm wide and 20mm thick plain type including scaffolding and painting intwo coats etc. complete. |
| 147 | Providing and fixing Mangalore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens etc. complete (Excluding ridge and hip tiles). |
| 148 | Providing and fixing Mangalore tile ridge and hip tiles of class "AA" including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. |
| 149 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 150 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 151 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 152 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 153 | Providing and fixing valley gutter of 24 B.W.G. (0.63 mm) thick G.I. sheet 120 cm wide with 20 mm thick teak wood planking underneath coal tarring etc. complete. |
| 154 | Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete. (excluding T.W. runner to be paid separately). |
| 155 | Providing and fixing false ceiling of 15mm thick as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm size, G.I. grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete |
| 156 | Providing and fixing false ceiling sheets of 15mm thick to existing GI grid with levelling including transporting, scaffolding & removing existing sheets with all necessary labour and machinery,finishing etc. complete.Spec :As directed by Engineer in charge.. |
| 157 | Providing and applying two coats of bitumen to roof on new dungaree cloth one coat on each side etc. complete as directed. |
| 158 | Providing and applying one coat of bitumen to roof (without cloth) including scaffolding etc. complete as directed. |
| 159 | Removing and resetting Mangalore tiles from roof including refixing loose battens etc.complete. |
| 160 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 161 | Providing fixing country teak wood battens 50 mm x 25 mm for Mangalore tile roof work with all iron work scaffolding and oiling the battens etc. complete. |
| 162 | Providing fixing teak wood battens 25 mm x 12 mm for Mangalore tile roof work with iron work scaffolding and oiling the battens etc. complete. |
| 163 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) |
| 164 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm,comprising of nominal 25mm exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenterto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 600 mm girth (Surface Width). |
| 165 | Providing & fixing 10mm thick poly carbonate sheets of approved shade / colourincluding ridges and flashings of 230mm wide as per drawing issued, all fixing arrangement such as screwing etc. and ensuring water tightness by applying silicon sealant in gaps ensuring 100% water tightness, Virgin PVC ,gaskets of approved make / manufacturer for roofing over open courtyard, ramp, etc. as per drawings issued (Giving guaranty for 10 years). (Rate shall Include Alluminium patti male female type at joints & edges) |
| 166 | Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texturespintone/cosmos/hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
| 167 | Providing and Fixing wall Soft Fibre Acoustical Suspended /Gypsum perforated sheet/techno Acoustic panels/Equivalent system with Optra (BevelledTegular)Edge Tiles of size 15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of 95%,NRC0.9-1.0,Light Reflectance?85%,Colour White,Fire Performance UK Class0/Class1(BS476pt-6&7) in module size of 600x600x15mm,suitable for Green Building application,with Recycled content of 66% GW and74%RW.The tile shall be laid on precoated G.I channel 32with15mm wideT-section flanges colour white having rotary stitching on all T sections i.e.the Main Runner,1200 mm and 600mm Cross Tees with a web height of 32mm and a load carrying capacity of 7 Kilograms/M2 with aminimum pullout strength of 100Kilograms.The T Sections have a Galvanizing of 90grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty.products approved as per GRIHA and BS 476 etc. complete. |
| 168 | Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular)Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH)of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 -0.057w/mK,Colour White,Fire Performance UK Class0/Class1(BS476pt-6&7)inmodule size of 600x600x16mm,with Recycled content of 35%.The tile shall be laid on precoatedG.I.channel height 32 with 15mm wide T-section flanges colour white having rotary stitching and XL2CLIP on all Tsections i.e.the Main Runner,1200mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57Kilograms/M2 and pullout stength of minimum100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system.The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS476 etc. complete |
| 169 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards,Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed toreinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item tobe completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. |
| 170 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 171 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 172 | Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete |
| 173 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) a) Without mechanical gear |
| 174 | b) With mechanical gear |
| 175 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 176 | Providing and fixing partition of welded mesh of 3 mm dia. wires 50 mm x 25 mm size mesh including integrated non teak seasoned wood frame 80 x 50 mm of vertical and horizontal scantling and finishing with oil painting 3 coats etc. complete |
| 177 | Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete |
| 178 | Providing and fixing M.S. grill door 24 Kilogram/Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 179 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box |
| 180 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box |
| 181 | Providing and fixing in position -------------- aluminium openable window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete. b) Powder Coated |
| 182 | Providing and fixing in position -------------- aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) Powder Coated |
| 183 | Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/Square Metre is considered. |
| 184 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete |
| 185 | Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm thick. |
| 186 | Providing and fixing 24 gauge plain aluminium sheet on the face of door shutter including cutting to required size and fixing the screws including making good the damages if any to existing door shutter and frame etc. complete as directed or as per detailed drawing |
| 187 | Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete |
| 188 | Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete |
| 189 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete |
| 190 | Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete |
| 191 | Refixing old alluminiumpartition (Labour rate only) including necessary rubber packing, screws etc. |
| 192 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete |
| 193 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete |
| 194 | Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size75mmx60mm.and sill of 75mm.x25mm.and newel posts for staircases,including fabricating,fix-tures,erecting,painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish |
| 195 | Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing buffing to stainless steel pipe etc. complet |
| 196 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complet |
| 197 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures andfastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) |
| 198 | Providing & applying Dual tone Texture Paint of Dulux make stone art ( Signature) make with one coat alkali primer, one coat above Texture paint & final coat of Ultra clean Tile shield clear coat including scaffolding, scrapping cleaning etc complete. |
| 199 | Providing & applying metalic duco paint ofapproved brand with duco primer, deco putty, finished coat of deco paint with spray painting to give appropriate finish incluing scrapping, scaffolding, cleaning etc. complete. Spec. No.As directed by Engineer-in-Charge |
| 200 | Providing & fixing M.S. cover for water tank of size 0.95 m x 0.95 mwith lock arragementthe frame of cover made up by 40 mm x 40mmx2.6mm square pipe& angle of 35x35x5 mm & cover of 35x35x5 with 2 mm thickCRC Sheet with painting etc. complete. |
| 201 | Providing and laying cast iron pipe of A class of Neco Make with socket and spiget end / flanges and cast centrifugally / vertically including specials laying pipes and back filling the trench complete including excavation 80 mm |
| 202 | Providing and laying cast iron pipe of A class of Neco Make with socket and spiget end / flanges and cast centrifugally / vertically including specials laying pipes and back filling the trench complete including excavation. 100 mm |
| 203 | Providing and making lead joints for 80mm diameter cast iron pipe line including lead and testing. Spec. No.: Bd.V.2 Page No. 549 |
| 204 | Providing and making lead joints for 100mm diameter cast iron pipes line including lead and testing. Spec. No.: Bd.V.2 Page No. 549 |
| 205 | Providing and making lead joints for 150mm diameter cast iron pipe line including lead and testing Spec. No.: Bd.V.2 Page No. 549 |
| 206 | Providing and making flanged connection for the 80mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete |
| 207 | Providing and making flanged connection for the 100mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete. |
| 208 | Providing and making flanged connection for the 150mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete |
| 209 | Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 210 | Providing and fixing on walls/ ceiling/ floors, 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings.remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 211 | Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings.remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 212 | Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 213 | Providing and fixing on walls/ ceiling/ floors,40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 214 | Providing and fixing on walls/ ceiling/ floors,50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kilogram/metre with necessary fittings.remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in Estate Office or as directed etc. complete. |
| 215 | Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same inEstate Office or as directed etc. complete. |
| 216 | Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same inEstate Office or as directed etc. complete. |
| 217 | Providing and fixing 15mm diameter water meter with non-return valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber]. |
| 218 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 219 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 220 | Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 221 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete |
| 222 | Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 223 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete |
| 224 | Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 225 | Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 226 | Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 227 | Providing and fixing push cock(Self closing tap)symet type of 15mm dia.including necessary socket, testing etc. complete. |
| 228 | Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) |
| 229 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 230 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 231 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete |
| 232 | Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete |
| 233 | Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall |
| 234 | Providing and fixing white glazed earthenware sink (Laboratory sink) 600mmx200mmx450mm including all connection of the G.I.supply and P.V.C.waste pipes up to the outside face of the wall,cold water chromium plated screwdown bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete |
| 235 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600mmx450mm size as per detailed drawing including vertical both side polished kadappah stone 25to30mm thick supports with kadappah top 35to40mm thick and polished granite 16to20mm top with sides trips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75x40 cm including cutting,opening for sink of required size in kadappah as well as granite etc. complete. |
| 236 | Providing and preparing kitchen otta made up from 30 mm thick and 75 cm. wide one side polished kadppa top 75 cm. wide one side polished kadappa top 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. |
| 237 | Dismanteling exisiting kitchen otta including plumbing, removing dado, plaster, sink and stacking the materials as directed with all leads, lifts, complete |
| 238 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 239 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe,brick masonry chamber with cast iron lid and cast iron grating for the gully trap |
| 240 | Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete |
| 241 | Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. |
| 242 | Providing and laying concrete pipes of I.S.NP. class of 100mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 243 | Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 244 | Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 245 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 246 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame as per approved make etc complete |
| 247 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 248 | Providing and fixing 6 mm thk mirror on bracket/ stud with edge polishing/Bevelling to all sides with fittings etc complete Spec. No: - As directed by Engineer in charge |
| 249 | Providing and fixing laying P.V.C. Pipe of 40 mm dia with fittings such as bends, tees, reducer, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No: - As directed by Engineer in charge. |
| 250 | Providing and fixing laying P.V.C. Pipe of 50 mm dia with fittings such as bends, tees, reducer, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No: - As directed by Engineer in charge. |
| 251 | Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polishing, cleaning etc complete. |
| 252 | Providing and fixing Orissa type white glazed earthware 575 mm water closet pan including "s" trap with eartenware foot rest, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 253 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0)cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 254 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. |
| 255 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. |
| 256 | Providing and fixing 25 mm dia ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.Spec. No: - As directed by Engineer-in-charge |
| 257 | Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. |
| 258 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 259 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 260 | Providing and fixing H.D.P container one piece mouldedwater tank in 3 layer made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. colour of water tank should be got approved from Engineer Incharge |
| 261 | Providing and fixing H.D.P container one piece moulded water tankin 3 layer made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.colour of water tank should be got approved from Engineer Incharge |
| 262 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stackingas directed etc. complete |
| 263 | Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stackingas directed etc. complete |
| 264 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stackingas directed etc. complete |
| 265 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stackingas directed etc. complete |
| 266 | Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stackingas directed etc. complete |
| 267 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. |
| 268 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete |
| 269 | Providing and fixingPVC MULTI nahani trap with grating etc. complete. Spec. No: - As directed by Engineer in charge |
| 270 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) |
| 271 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 Kilogram) |
| 272 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Heavy duty (160 Kilogram) |
| 273 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 Kilogram) |
| 274 | Providing and making ISI Mark ferrule connection of 25mm dia.to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. |
| 275 | Providing and making ISI Mark ferrule connection of 40mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. |
| 276 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 277 | Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. |
| 278 | Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. |
| 279 | Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete |
| 280 | Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. |
| 281 | Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 282 | Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. |
| 283 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 284 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks,including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete |
| 285 | providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) |
| 286 | Providing and fixing high level 10 liter capacity with fittings inlet PVC pipe with stop tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow pipe with mosquito proof couplings, galvanised iron chain and pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged wall and testing etc.complete |
| 287 | Providing,laying and fixing,jointing Eco-drain 200mm SN4 Nu-Drain Upvc pipes or of equivalent make,manufacture as per EN13476 or equivalent as per I.S.15328 with fittings such a bends,tees,coupler etc,jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete |
| 288 | Providing,laying and fixing,jointing Eco-drain 315 mm SN4 Nu-Drain Upvc pipes or of equivalent make,manufacture as per EN13476 or equivalent as per I.S.15328 with fittings such a bends,tees,coupler etc,jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete |
| 289 | Providing and fixing 15 mm diameter PVC approved makebib tap / Angle stop tap with flange including all accessories etc complete |
| 290 | Providing and fixing 15 mm diameter PVC approved makePillartap with flange including all accessories etc complete |
| 291 | Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50x 6mm) post at 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in ( 1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete |
| 292 | Concealed the pipe line(Approved rate) |
| 293 | Providing and constructing on sewer, B.B.Masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C. C.1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia.etc. complete as directed by Engineer incharge. |
| 294 | Providing and fixing 15mm diameternon-return valve including sockets / union nut etc. complete. Spec. No: - As directed by Engineer in charge |
| 295 | Providing and fixing 25mm diameter non-return valve includingsockets / union nut etc. complete. |
| 296 | Providing and fixing Flexible pipe for basin outlet etc. complete. Spec. No: - As directed by Engineer in charge |
| 297 | Providing and fixing (hand shower )C.P.health faucet of Jaquar make with 8 mm dia 1 mtr long flexible tube having wall hookincluding necessary sockets/ union nut etc. complete.as directed by Engineer in charge |
| 298 | Providing and fixing (hand shower )C.P. health faucet with 8 mm dia 1 mtr long flexible tube having wall hook with approved make including necessary fitting etc. complete.as directed by Engineer in charge |
| 299 | Providingand fixingJaquar Make towel rodwith all necessaryfitting etc. complete.Spec. No: - As directed by Engineer in charge |
| 300 | Providingand fixingJaquar Make soap dish with all necessaryfitting etc. complete. |
| 301 | Providingand fixing Paper holder in toiletswith all necessaryfitting etc. complete. Spec. No: - As directed by Engineer in charge |
| 302 | Providing and fixing Jaquar make overhead shower Spec. No: - As directed by Engineer in charge |
| 303 | Providing and fixing Steen less steel Jali for Nahani trap Spec. No: - As directed by Engineer in charge |
| 304 | Providing fabricating & fixing M.S. Grating 60kg/sqm. Spec. No: - As directed by Engineer in charge |
| 305 | Repair & maintenanceof BB Chambers by increasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 306 | Repair & maintenance of BB Chambers by decreasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 307 | Providing and making Holes (Core cutting ) in chajjas and slab for passing the pipe line. Spec. No: - As directed by Engineer in charge |
| 308 | Providing and making Holes (Core cutting ) in U.C.R. wall for passing the pipe line. Spec. No: - As directed by Engineer in charge |
| 309 | Providing & fixing 18 mm thk plywood of approved make with Teak wood framework of size 50mm x 50mm having grid spacing at 600mmx 600mm centre to centre both ways etc complete for lift opening. |
| 310 | Providing and fixing Godrej make door clooser with all fixtures and fittingsSpec. No: - As directed by Engineer in charge |
| 311 | Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) Spec. No: - As directed by Engineer in charge |
| 312 | Providing and fixing Rolling Blinds of approved make & shade with Blackout fabric& telting with chain(Ball)system with all necessary fixtures and fitting etc.complete.(Sample to be final by Engineer In-charge prior execution of work) Spec. No: - As directed by Engineer in charge . Brands- D Décor, MAC,Johnson |
| 313 | Providing & laying APP (Atactic Polypropylene Polymer ) modified prefabricated five layer, 3mm thick water proofing membrane, black in colour Spec. No: - As directed by Engineer in charge |
| 314 | Providing & fixing HDPE Plastic Tarpaulin200 GSM with rebatted hole to cover the roof area binding with the rope of approved colour etc. complete. Basic rate Rs 50/sqm |
| 315 | Providing & fixing Tar felt sheet over the roof area binding with the rope etc. complete. |
| 316 | P&Fchainlink50*50 mmsizeof 8 gaugewithfittingby 6mmbaretc complete.Spec. No: - As directed by Engineer in charge |
| 317 | Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. |
| 318 | Providing and supplying water tanker of filtered water from PMC upto 10,000 lit. capacity as directed by Engineer in Charge. Spec. No: - As directed by Engineer in charge |
| 319 | Providing and fixing Fixtures and fastenings of SS make to doors along with the repairs of the doors Spec. No: - As directed by Engineer in charge |
| 320 | Providing and fixing S.S. mosquito net with teak wood 0.35 x 0.10 wooden batten. Spec. No: - As directed by Engineer in charge |
| 321 | Providing & fixing H.D.P. water tank cover etc. complete. |
| 322 | Rebaring work for length of 100 to 200mm (TMT) including drilling, grounting complete. Spec. No.: As directed by Engineer in charge., a) 8mm |
| 323 | Rebaring work for length of 100 to 200mm (TMT) including drilling, grounting complete. Spec. No.: As directed by Engineer in charge.,b) 12 mm |
| 324 | Rebaring work for length of 100 to 200mm (TMT) including drilling, grounting complete. Spec. No.: As directed by Engineer in charge.,c) 16 mm |
| 325 | P& F french doorfully glazed inbermateaksection as perdesign& drg with 5mm texture glass ply planking out side teak frame & laminate onply with floor spring etccomplete Spec. No: - As directed by Engineer in charge |
| 326 | P&Fdoor lock for French Door. Spec. No: - As directed by Engineer in charge |
| 327 | Providing and fixingcommod sheet cover NDSR |
| 328 | Providing and fixing green cloth-NDSR |
| 329 | Providing double flanged Sluice Valves conforming to IS- 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges ,transportation upto departmental store ,unloading ,stacking excluding GST Levied by GOI & GOM in all respect etc. complete.Sluice Valve PN-1.0 (without bypass arrangement) |
| 330 | Providing double flanged Sluice Valves conforming to IS- 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges ,transportation upto departmental store ,unloading ,stacking excluding GST Levied by GOI & GOM in all respect etc. complete.Sluice Valve PN-1.6 (without bypass arrangement) |
| 331 | Providing and fixing Inlet pipe for basin inlet etc. complete. NDSR |
| 332 | Providing & Fixing Basin waste water coupling |
| 333 | Material Shifting by truck Spec. No: - As directed by Engineer in charge |
| 334 | Mazdoor, Unskilled Heavy Male/Female Spec. No: - As directed by Engineer in charge |
| 335 | Providing Carpenter I Class Skilled Spec. No: - As directed by Engineer in charge |
| 336 | Providing Plumber with tools - Skilled Spec. No: - As directed by Engineer in charge |
| 337 | Providing welder / driller with tools - Skilled Spec. No: - As directed by Engineer in charge |
| 338 | Providing J.C.B. for cleaning, levelling, digging and miscellanous work etc. complete. Spec. No: - As directed by Engineer in charge |
| 339 | Providing and Fixing half turn/ Quarter turn of jaqaur make with necessary fittings( Flushing Cock.) |
| 340 | Providing and Fixing door fiitting for single doorbrass of CENT makeetc complete. |
| 341 | Providing and Fixing door fiitting for Double doorbrass of CENT makeetc complete. |
| 342 | Providing & fixing in position, full height partly glass panelled & partly solid partition made of treated Teak wood framework of size 50mm x 50mm having grid spacing at 900mmx 450mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywoodshall be screwed to the framework. plain Glass and texure glass of thickness 5 mm will be fixed as per design with wooden beading of size 38mm x 12 mm on both sides. Wooden beadings will befinished inthree or more coats of melamine polish (glossy/matt) with 12 mm x 6 mm groove in each panel.Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make.as per the drawing, specification as directed by the Engineer incharge etccomplete( as per Pro VC office) |
| 343 | Providing & fixing in position, full height solid partition made of C.C.Teak wood framework of size 50mm x 50mm having grid spacing at 900mmx 450mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with1mm thick laminate of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywoodshall be screwed to the framework. plain Glass 5 mm thick and texure glass of5 mm thick will be fixed as per design with wooden beading of size 38mm x 12 mm on both sides. Wooden beadings will befinished inthree or more coats of melamine polish (glossy/matt) with 5 mm x 5 mm groove in each panel.Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification As directed by Engineer Incharge etccomplete. |
| 344 | Providing and fixing storage unit ( storage Runner) of W 0.45 metermade of18 mm thick plywood of approved make including shelf as per drawing and shutters both made of 18 mm thick plywood, and storage unit is finishedwith approved quality 1 mm thick laminate outer side& inner side finished with white laminate with all necessaryfittings like drawer channels, hinges, towerbolthandels, lock, safety chain, magnetic stoppers of approved make etc. melaminepolishingforexposededges As directed by Engineer Incharge etccomplete. |
| 345 | Providing and Fixing Decorative Acrylic sheet for false ceiling fixed in framework of teakwood section of 50 x 50 mm covered with teak wood beading including all necessary fixtures and fasteners, tools and plants etc. complete. |
| 346 | Providing & Fixing 6 mm thickglass for office table withnecessaryedge polish to all sides etcComplete as directed by Engineer Incharge. |
| 347 | Providing & Fixing Chemical Anchor fastner (HILTI Make) (HIT-VM 16x200) with Chemical HY 200 R etc. complete |
| 348 | Providing & Fixing Spreader forfull stall urinals etc complete |
| 349 | Providing and fixing Three waytab for laboratory etc complete. Spec. No.: As directed by Engineer in charge., |
| 350 | Providing and fixing Heavy duty Floor spring of ENOX makefor glass door etc complete. Spec. No.: As directed by Engineer in charge., |
| 351 | Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. |
| 352 | Providing & FixingCalcium Silicate boards (Hilux boards) of12mm thk for Ceiling/Wall by self drilling & tapping screws including Filling the gap between boards with joint compound & fibre tape together for seamless finishetc complete |
| 353 | Providing & FixingCalcium Silicate boards (Hilux boards) of8 mm thk for Ceiling/Wall by self drilling & tapping screws including Filling the gap between boards with joint compound & fibre tape together for seamless finishetc complete |
| 354 | Providing and fixing stage with 18mm ply with approved make. internal members using 18 mm ply at every 600mm c/c bothways .300mm depth finished with l mm thk laminate of approved make on outer side excluding the top face of stage. etc complete. Top area of stage will be considered for measurement. ( as per Dyneshwar hall of Main building) |
| 355 | Providing and fixing 4mm Thk Stilexflooring Over Stageincluding leveling the base with white cement including pasting with appropriate adhesive material cleaning the surface etc. complete ( as per Dyneshwar hall of Main building) |
| 356 | Providing and fixing flush door shutter in Double leaf 34 mm thick with teak wood bidding of size 32x12mm thk finished with 1 mm thick laminate of approved colour on both faces also including vision panel glass 5mm thick fixing with teak wood bidding on both side of vision as per given detail drawing and all necessary hardware & accessories like Hinges, D type handles on both sides, Tower bolt, Aldrops, Door stopper, as directed by Engineer Incharge etc.complete. |
| 357 | Providing and fixing flush door shutter in Single leaf 34 mm thick with teak wood bidding of size 32x12mm thk finished with 1 mm thick laminate of approved colour on both faces also including vision panel glass 5mm thick fixing with teak wood bidding on both side of vision as per given detail drawing and all necessary hardware & accessories like Hinges, D type handles on both sides, Tower bolt, Aldrops, Door stopper, as directed by Engineer Incharge etc.complete. |
| 358 | Providing and fixing flush door shutter in Single leaf 34 mm thick with teak wood bidding of size 32x12mm thk finished with 1 mm thick laminate of approved colour on both facesas per given detail drawing and as directed by Engineer Incharge etc.complete. |
| 359 | Providing and Fixing Anchar Fastner 100mm length in Wall of 10mm dia. including drilling etc complete. Spec. No.: As directed by Engineer in charge., |
| 360 | Repair work of cracks on H.D.P container Syntex or alike one piece moulded water tank using hot air gun with plastic raw wire etc. complete. |
| 361 | Supplying,providing & fixing waterproofing treatment with standard multiples of 3 kg/sqmt. Manufactured by IWL(I) ltd. Or similar as approved by engineer in charge at site with 90 micron thick HM HDPE centre core including coating the surface with multiples blown @1.2 kg/sqmt.of 90/50 grade with 10cms overlaps where required including scaffolding screwing,pasting ,capping or as As directed by Engineer in charge |
| 362 | Providing & fixing 18 mm thk.marine plywood of approved make including fixing stainless steel screw,cutting , sawing,making proper wood joinery scaffolding etc complete and As directed by Engineer in charge |
| 363 | Providing&fixing YALE make YDME 90 Digital door lock with all accessarries complete. |
| 364 | Providing and Fixing 8 mm plane glass with each side polishing and fitted on CP Brackets . |
| 365 | Rolling shutter of any size servicing , Greasing with tensioning etc complete. |
| 366 | Rolling shutter of any size servicing , Greasing with tensioning including replacing the springs etc complete. |
| 367 | Rolling shutter of any size servicing , Greasing with tensioning etc complete. With mechanical Gear |
| 368 | Providing & fixing in position, full height 75 mm thk solid partition made of Salwoodframework of size 50mm x 50mm having grid spacing at 600mmx 600mm centre to centre both ways & covered with 12 mm thick approved plywood on both sides of framework & finished with1mm thick laminate & texture paint of approved color and texture. The framework shall be properly screwed to the walls, ceiling and floor and plywoodshall be screwed to the framework. Lipping patti of BTC fixed as per design on both sidesfinishedof melamine polish (glossy/matt) .Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification As directed by Engineer Incharge etccomplete.(As per Deans Cabin) |
| 369 | Providing & fixing in position, full height Glass partition made of Salwoodframework of size 50mm x 50mm . The framework shall be properly screwed to the walls, ceiling and floor and plywoodshall be screwed to the framework.texure glass of thickness 6 mm will be fixed as per design with BTC beading of size 45 x 10 mmon both sides will befinished inthree or more coats of melamine polish (glossy/matt) .Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. as per the drawing, specification As directed by Engineer Incharge etccomplete.(As per Deans Cabin) |
| 370 | Providing and fixing frosted film to existing glass as directed by Engineer Incharge etc.complete. |
| 371 | Providing and fixing 12 mm thk.plywoodfinished with 1 mm thick laminate of approved colour on one faceas per given detail drawing and with necessary Nails ,screw, fevicol etc. as directed by Engineer Incharge etc.complete. |
| 372 | Providing and fixing 18 mm thk.plywoodfinished with 1 mm thick laminate of approved colour on one faceas per given detail drawing and with necessary Nails ,screw, fevicol etc. as directed by Engineer Incharge etc.complete. |
| 373 | Providing and fixing 18 mm thk.plywoodfinished with0.8 mm white laminate on both sides as per given detail drawing and with necessary Nails ,screw, fevicol etc. as directed by Engineer Incharge etc.complete. |
| 374 | Providing and fixing frame with / without ventilator of size as specified with Burma teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 375 | Providing & fixing BTC 1 st quality Panelled doorswithbrass hingesetc complete ( shutters are as per existing design) |
| 376 | Providing & fixing BTC 1 st qualityGlazed windowwithbrass hingesetc complete ( shutters are as per existing design) |
| 377 | Providing Golden Paint atmain Building etc. Complete |
| 378 | Providing Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick granite stone |
| 379 | Providing & Fixing Ribbed carpet by removing oldcarpet andincluding leveling the base with POP including pasting with appropriate adhesive material cleaning the surface etc. complete |
| 380 | Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete |
| 381 | Providing and fixing storage shutters made of18 mm thick plywood of approved make as per drawing andfinishedwith approved quality 1 mm thick laminate outer side& inner side finished with 0.8 mm white laminate with all necessaryfittings likehinges,handles, safety chain, tower bolt & lock of approved make etc.As directed by Engineer Incharge etccomplete. |
| 382 | Providing& Fixing storage cabinet stanadard depth 18" out to out made of 18 mm thick plywood of approved make of 2.4 mtr highincluding shelf as per drawing and shutters both madeof 18 mm thick plywood , back covered with 12 mm plywood, all edges finished with TW lipping with french polish , Storage unit is finished externally with approved quality 1 mm thick laminate including finishing inner side with 0.8 mm thk laminate& back side by two coats of french polish with necessary fixtures & fastening as per detailed design & drawing and as directed by Engineer in charge.etc.complete |
| 383 | Providing and fixing crimped with G.I.mesh and size 20 mm x 20 mm10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat,fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel) |
| 384 | Supply and instalation of Gi spikes (height 110mm , sharpes heighted spikes at 80mm intervals width 80mm . Thickness of 3mm) for existing chainlink fencing /trepasing ,as per dwg & as directed by engineer in charge |
| 385 | Providing and casting in situ or precast tapering R.C.C.M30 Kerbs 400 mm H x 300 mm Lx100mm W finished neatly with C.M. 1:2, setting the same in C.M. 1:2, painting exposed surface of the kerbs with 2 coats ofApex paint of approved quality and colour including the required excavation in any strata and removing the excavated stuff and redoing the surface as specified and directed. Spec. No.: MORTH 409 |
| 386 | Providing & fixing Reinforced precast L shaped kerb stone using 6 mm steel bars 4 number alomg the kerb length and 8 mm steel bar 500 mm c/c vertical reinforcement, M-30 grade concrete with dimensions 350 mm high, 125 mm thick with built in base of 187 mm x75 mm, including 2 numbers of 50 mm dia sleeves for services at the top of base & with top external edge with rounding of 20 mm radius in highly superior quality surface & edge finish in 1 meter length & painting as per direction of Engineer-in-charge (including excavation for kerbing, lead lift and transportation of excavated material, PCC below kerbing) As directed by Engineer In Charge |
| 387 | Providing and fixing Godrej make Drawer Lock etc complete. Spec. No.: As directed by Engineer in charge., |
| 388 | Providing S.S. rod of 25 mm thk as approved by Engineer In-Charge. |
| 389 | Providing and fixingSS Socket for curtain etc complete. Spec. No.: As directed by Engineer in charge., |
| 390 | Providing and fixing Godrej / Europa make Wordrobe Lock etc complete. Spec. No.: As directed by Engineer in charge., |
| 391 | Providing and fixing Union for 15 mm dia etc complete. Spec. No.: As directed by Engineer in charge., |
| 392 | Providing and fixing Union for 25 mm dia etc complete. Spec. No.: As directed by Engineer in charge., |
| 393 | Providing and fixing Union for 40 mm dia etc complete. Spec. No.: As directed by Engineer in charge., |
| 394 | Providing and fixing Union for 50 mm dia etc complete. Spec. No.: As directed by Engineer in charge., |
| 395 | Providing and fixing 12 mm plane glass for office table with necessary edge polishing/Bevelling to all sidesetc complete Spec. No: - As directed by Engineer in charge |
| 396 | Providing and fixing Long neck pillar cocketc complete. Spec. No.: As directed by Engineer in charge., |
| 397 | BASIC TEST OF CEMENT:-. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 398 | BASIC TEST OF AGGREGATE.:-Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 399 | Sieve Analysis. |
| 400 | Abrasion value |
| 401 | Flakiness index and elongation index |
| 402 | Soundness |
| 403 | FINE AGGREGATES :-Fineness modules (Sieve Analysis), silt and clay content |
| 404 | Silt factor |
| 405 | BRICKS:-Water absorption (set of 5 bricks), Compressive strength (set of 5 bricks), Efflorescence (set of 5 bricks) |
| 406 | CONCRETE:-Compressive Strength OF C.C. Cube(Set of 3 cubes) |
| 407 | STEEL BAR TESTING :-Up to 16 mm (set of 3 bars) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
