|
| 1 | Earth Work excavation in hard soil in foundation and plinth within 50 m initial lead and 1.5 m initial lift including dressing and breaking clods levelling the bed up to required depth and depositing the excavated materials with all leads and lifts T and P etc. complete as per direction of Engineer-in-charge. |
| 2 | Convaying the exacavated Earth away from the work site by mechnical means with in 5 km lead as per direction of EIC. |
| 3 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge. |
| 4 | Cement Concrete (1:4:8) with 4 cm size CBHGed quality from approved quarry including lowering laying concrete water curing to required level not exceeding 150 mm thick including cost, conveyance, royalty taxes of all materials etc. complete as per direction of Engineer-in-charge. |
| 5 | R.C.C work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying all cost ofmaterials, labour, conveyance, royalty, Tools and Plants water for curing etc. all complete,as per O.P.W.D. specification required for the work to finished items of work. ( See Page no-50,Item no 4 of AoR-06) |
| 6 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor |
| 7 | Lintel |
| 8 | Slab |
| 9 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification, including, cutting bending, binding & placing, the steal rods as per drawing technical specifications with cost of binding wire 18 to 20 gauges etc. complete. |
| 10 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 11 | Fly ash brick work in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance, royalty & taxes etc. compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 12 | Cementconcrete (1:2:4) with 12mm size crusher broken hard granite chips including hosting and laying all cost ofmaterials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete,as per O.P.W.D. specification required for the work to finished items of work. (See Page no-44,Item no 7 of AoR-06) |
| 13 | 12mm thick C:P (1:6) over brick work Including all cost conveyance, Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C. |
| 14 | 16mm thick C:P (1:6) over brick work Including all cost conveyance , Royalty & taxes etc. complete of all materials to work site as B139per specification approved of E.I.C. |
| 15 | Supplying fitting fixing of M.S Grill including cost of material & labour charges etc complete. |
| 16 | Two coat cement wash inside and out side smooth surface with all cost convayanceetc complete. |
| 17 | Finishing walls with water proofing weather coat cement paint of approved shade onnew work two coat to give an even shade inculding cost of paint, Cess Per 1 Sqm. |
| 18 | Painting 2 coat enamal paint over a coat of primer including cost of material and labour charges etc complete. |
| 19 | Wall painting 2 coats withDistemper of approved shade on new work to give an even shade inculding cost of paint (For 10 Sqm.) (See Page no-99,Item no 20 of AoR-06) |
| 20 | Supplying fitting fixing of M.S truss with I section pole including cost of material & labour charges etc complete. |
| 21 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.)( Tata Make) |
| 22 | Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete. |
| 23 | Supplying, fitting and fixing vitrifed tile In floors of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand ) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer- in- Charge. |
| 24 | Fixing ceramic tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete |
| 25 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154. 151-155, as windows frame section No. 151155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading includirg locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 26 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete. |
| 27 | Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2\"-0\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2\"-0\"x 2-0\" with prelaminated particle board suspended from ceiling etc complete. |
| 28 | Supplying all materials, labour, T&P for fitting and fixing of 2000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge. |
| 29 | Construction of Septic tank (2.0m X 0.9m)m size as per specification with brick masonary wall and RCC slab etc. complete. |
| 30 | Construction of RCC Ring Soak way pit - 1.20 m dia and 1.5 mtr deep etc. complete. |
| 31 | Supplying all materials, labours, T&P for construction of brick massonry staging for installation of 1000ltrs capacity Sintex tank with flyash brick work with C.M.(1:6) up to reqd. height & length & plastering with C.M.(1:4) including white washing two coats with shell lime & colour washing 1 coat with shell lime & colouring materials, providing RCC slab of 10cm. thick and 0.30m.x0.25m. size & 2.60m. long RCC beam with CC(1:1.5:3) using 12mm. HG chips including centering & shuttering & providing 1st class flyash brick work with C.M.(1:6) circular dia. upto a height of 46cm. over the slab to support the tank including conveyance of all materials to worksite watering, curing, royalty, taxes etc. all complete as per P.H.D. specification and direction of the Engineer in charge. (On the roof of the G. floor) |
| 32 | Supplying fitting fixing of single pannel PVC door with choukath incluidng cost of all fittings, labour charges, T&P etc. all complete as per direction of Engineer-in-charge. |
| 33 | Cutting grooves in brick masonry wall / pucca floor for taking G.I. pipes and making good to the damages etc. all complete as per direction of Engineer-in-charge. |
| 34 | Supplying all materials, labour, T&P conveyances, fitting and fixing the following nominal bore G.I. / P.V.C. Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge (25mm dia. ASTM PVC (Sch-80) pipe) |
| 35 | 20mm dia. ASTM PVC (Sch-80) pipe |
| 36 | 40mm dia. ASTM PVC (Sch-80) pipe |
| 37 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge.15mm dia. C.P. short body bib cock.(Amber Delux) |
| 38 | 15mm dia C.P. long body bib cock (Amber Delux) |
| 39 | 15mm dia. C.P. Angle stop cock.(Amber Delux) |
| 40 | 125mm dia CP grating |
| 41 | 23\" long Orissa pan with \"P\" trap (Nycer / Parryware) |
| 42 | 23\" long EWC with \"S\" trap including Seat cover(Nycer / Parryware) |
| 43 | 10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). |
| 44 | CP Soap holder |
| 45 | 25 mm UPVC-ASTM Ball Valve |
| 46 | 40 mm UPVC-ASTM Ball Valve |
| 47 | 25 mm PVC Ball Cock |
| 48 | Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (750mm x 750mm x 450mm deep) |
| 49 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (250mm x 250mm x 675mm deep) |
| 50 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia PVC SWR pipe S/S |
| 51 | 110mm dia PVC single junction |
| 52 | 110 mm Plain Bend 45 degree |
| 53 | 110mm dia P.V.C. SWR Cowl |
| 54 | Labour for drilling and perfectly vertical bore hole of specified dia for specified depth below ground level through consolidated and consolidated roack with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories T&P and consumables etc to lowering of 125mm x 100mm dia GI/PVC/MS Pipe for housing fitted with socket with or without well screen and as per the necessary for soft medium, hard and boulders formation (GI/PVC/MS casing pipes if required to prevent collapse of over burden is to loweing and with drawing after compeltion of the tube well) |
| 55 | Lowering the following size of PVC ASTM Sch-80 housing pipe with or without slotted from ground level upto 45.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes T&P etc all complete and keeping the top of casing pipe threaded including plugging tubewell to prevent entry of foreign materials.Lowering of 125mm dia PVC pipe=50.0m |
| 56 | Supply of 125mm dia PVC ASTM Sch--80 pipe includign all cost complete |
| 57 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. |
| 58 | Supply of 0.5 HP, 7ST 4\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual) 0.5HP submersible pump 1 set |
| 59 | Cost of 32mm HDPE Pipe |
| 60 | Cost stainless steel nipple |
| 61 | Cost of 1.5sqmm electric Cable |
| 62 | Cost of Bore Cover |
| 63 | Cost of clamp |
| 64 | Cost of steel rope . |
| 65 | Cost of installation of pump including accessories etc. complete. |
| 66 | Cost of Roof Top Ventilater of size 22\"\" . |
