|
| 1 | Parking |
| 2 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 3 | Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 4 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 5 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 6 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 7 | Providing and laying. coarse Rubble Stone Masonry withhammer dressed clean hard selected stone in 1:3:6c.c. (1cement, 3 sand, 8 clean hard graded stone ships of size 40mm)including bond stone, through stone of size 150mm x 150mm x450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) andcuring etc, complete as per the direction of Engineer in Chargeexcluding the cost of carriage of materials. |
| 8 | Providing and laying Architectural Designed Interlocking Parking Tiles laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry |
| 9 | Cost of Haulage ofNon-stock materials (51 km) |
| 10 | Loading and Unloading |
| 11 | Haulage |
| 12 | Cost of Haulage ofStock materials (51 Km) |
| 13 | Loading and Unloading |
| 14 | Haulage |
| 15 | Boundary Fencing |
| 16 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 17 | Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 18 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 19 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 20 | Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete. |
| 21 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 22 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 23 | FORM WORK |
| 24 | Foundation Footing |
| 25 | Foundation Column |
| 26 | Plinth Beam |
| 27 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 28 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the irection of Engineer in Charge including curing etc all complete |
| 29 | Supplying, fabricating, fitting and fixing steelincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete. |
| 30 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanizedIron steel works including preparation of the surface complete. |
| 31 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 32 | Providing and laying 15mm thick cement plaster of 1:3 mix in single coat for Sikkimies Traditional Design (Dragon, Tinghri, Pema, Norbhu, Chimindah, Samtha, Pem, Motiq, Khinaqh and Patta) in Exteriors,Interiors of walls, Slabs and Exposed Columns and Beams including carving, painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface,excluding the cost of cement, sand, carriage of materials, Scaffolding but including the cost of primer and enamel paint, all complete. |
| 33 | Cost of Haulage ofNon-stock materials (51 km) |
| 34 | Haulage |
| 35 | Cost of Haulage ofStock materials (51 Km) |
| 36 | Loading and Unloading |
| 37 | Haulage |
| 38 | Entry Gate |
| 39 | Excavation work by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 40 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 41 | Providing & Layingin position cement concrete of 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 42 | Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete. |
| 43 | Providing & Laying in position1:1.5:3 mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) reinforced cement concreteof nominal mix excluding the cost of form work, finishing & reinforcements with Recron 3S of fiber length6 or 12 mm (125 gm of recron 3S per a bag of cement) as per the direction of Engineer in Charge. |
| 44 | Providing, fixing and removing form work for casting R.C.C items as indicated below: (with locally available timber) |
| 45 | Foundation, footings, base of column etc. for mass concrete. |
| 46 | Squarecolumns |
| 47 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 48 | Floor slab, roof slab, landing, balcony & access platform. |
| 49 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 50 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. (1:3 mix) |
| 51 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete. (Paris putty applied both in internal & external surface as specified in the drawings enclosed.) |
| 52 | Providing and painting with ready mixed paint of approvedquality and shade with two or more coats to give an even andsmooth shade including clearing the surface complete on newsurface |
| 53 | Providing and layingSikkimies Traditional Laripa Work & Design (Dragon, Tinghri, Pema, Norbhu, Chimindah, Samtha, Pem, Motiq, Khinaqh and Patta)including carving, painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface,excluding the cost of cement, sand, carriage of materials, Scaffolding but including the cost of primer and enamel paint, all complete. |
| 54 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 0mm) including bond stone, through stone of size 150mm x 150mm x450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 55 | Haulage for stock material via Surfaced Road for the distance of 51 km excluding loading and unloading all complete. |
| 56 | Total load to be carried |
| 57 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 58 | Haulage for Sand, River via Surfaced Road for the distance of 51 km excluding loading and unloading all complete. |
| 59 | Total load to be carried |
| 60 | Haulage for Coarse aggregate, dry & well shaken via Surfaced Road for the distance of 50km excluding loading and unloading all complete. |
| 61 | Total load to be carried |
| 62 | Haulage for Stone via Surfaced Road for the distance of 40km excluding loading and unloading all complete. |
| 63 | Total load to be carried |
| 64 | Loading and Unloading of Boulders by Manual Means |
| 65 | Hill Cutting |
| 66 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres. |
| 67 | Excavation in hilly area in ordinary rock not requiring blasting by Manual means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 50 metres. |
| 68 | Throwing of spils from work site to suitable dumping places |
| 69 | Loading and unloading |
| 70 | Cost of Haulage 5 km |
| 71 | SITE LEVELLING , PROTECTIVE WORK AND DRAINAGES |
| 72 | Labour engaged in Site Preparation |
| 73 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres. |
| 74 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 75 | Providing and laying. coarse Rubble Stone Masonry withhammer dressed clean hard selected stone in 1:3:6c.c. (1cement, 3 sand, 8 clean hard graded stone ships of size 40mm)including bond stone, through stone of size 150mm x 150mm x450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) andcuring etc, complete as per the direction of Engineer in Chargeexcluding the cost of carriage of materials. |
| 76 | Providing and laying standard \"V\" shaped drain with cement concrete base in 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 20mm and down) mix of 100mm thick over clean hard selected stones soling of 150mm thick and 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 40mm and down) mix plum concrete along the vertical side of thickness 150mm and depth 450mm including curing, compacting, as per the direction of the Engineer- in - Charge |
| 77 | Carriage of Non-Stock Materials 51 km |
| 78 | Cost of Haulage |
| 79 | Loading and Unloading |
| 80 | Carriage of Stock Materials 51 km |
| 81 | Cost of Haulage |
| 82 | WALWAYS AND PATHWAYS |
| 83 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 |
| 84 | Compacting original ground supporting sub-grade |
| 85 | Granular Sub-Base with Coarse Graded Material (Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) |
| 86 | GSB-I |
| 87 | GSB-II |
| 88 | Providing and laying Architectural Designed Interlocking Parking Tiles laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry |
| 89 | Carriage of Non-Stock Materials 51 Km |
| 90 | Cost of Haulage |
| 91 | Cost of Loading and Unloding |
| 92 | RESIDENTIAL QUARTER |
| 93 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 94 | Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 95 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 96 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 97 | Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete. |
| 98 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 99 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 100 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 101 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 102 | Providing, fixing & removing form work for casting R.C.C items as indicated below |
| 103 | Foundation Footing |
| 104 | Foundation Column |
| 105 | Plinth Beam |
| 106 | Column |
| 107 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 108 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 109 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 110 | Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent) |
| 111 | Providing, fitting and fixing of dressed timberframes, completely hand crafted in workshop. (katus or equivalent) in all doors. |
| 112 | Providing, fitting and fixing of designer timberframes, completely hand crafted in workshop. (katus or equivalent) in all windows. |
| 113 | Providing fitting and fixing in position of designer fully paneled door shutters designed and handcrafted in workshops of teak timber or equivalent excluding steel butt hinges, tower bolts, handles, door knobs, screws etc all complete. |
| 114 | Providing fitting and fixing in position of designer fully paneled window shutters designed and handcrafted in workshops of teak timber or equivalent including steel butt hinges, tower bolts, handles, handles,eye hooks, screws etc all complete. |
| 115 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 116 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in walls etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 117 | Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete. |
| 118 | Providing and painting with Aluminum paint two or more coats on new surface to give an even shade including cleaning and preparing the surface complete. New surface |
| 119 | Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 120 | Providing, fitting, fixing of 24 BWGGP sheet roofing with G.I. hooks, bolts and nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and paintedin lapping with bitumen, GI limpet washers, including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 121 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 122 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete. |
| 123 | Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre-painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete. |
| 124 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 125 | Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 126 | Provision for site levelling an protective work (Payment to be made as per actual measurement. |
| 127 | Providing and layingSikkimies Traditional Laripa Work & Design (Dragon, Tinghri, Pema, Norbhu, Chimindah, Samtha, Pem, Motiq, Khinaqh and Patta)including carving, painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface,excluding the cost of cement, sand, carriage of materials, Scaffolding but including the cost of primer and enamel paint, all complete. |
| 128 | Doors and Window Fittings |
| 129 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete. |
| 130 | Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete. |
| 131 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. |
| 132 | Providing, fitting and fixing handles 125mm size with necessary screws etc complete. |
| 133 | Providing and fixing M.S. or oxidized M.S. Hook and Eyes with complete set. |
| 134 | Providing and Fixing Hydraulic door closer with accessories and screws complete. |
| 135 | Cost of Haulage ofNon-stock materials (51 km) |
| 136 | Haulage |
| 137 | Loading & Unloading |
| 138 | Cost of Haulage ofstock materials (51 Km) |
| 139 | Loading and Unloading |
| 140 | Haulage |
| 141 | Planning, Design, supply, fabrication and Installation of statue of Lord Maitreya Buddha of height 48\" tall in copper sheet/plate in 1.29 mm to 2.05 mm thick repousse method including internal frame work in M.S Square ,round, flat bar as per design welding, grinding and polishing / painting all complete, as per the direction of engineer in charge.Statue base: 12\" height Reinforced cement concrete structures inner wall copper surface finishing, embossing etc.Payment to be made as per actual measurement) |
| 142 | Planning, Design, supply, fabrication and Installation of statue of Chatral Sangye Dorjee Rinpoche of height 6\" tall in copper using casting method including internal frame workand mould of suitable material like resin-bonded sand, ceramic clay etc as per requirement i/cpolishing / painting all complete, as per the direction of engineer in charge.Statue base: 4\" feet height Reinforced cement concrete structures. (L.S) (Payment to be made as per actual measurement) |
| 143 | Construction of 2 nos of big Mani Khorlo and Planning, Design, supply, fabrication and Installation of statue of Guru Rimpoche in water bodies of height 6\" tall in copper using casting method including internal frame workand mould of suitable material resin-bonded sand, ceramic clay etc as per requirement i/cpolishing / painting all complete, as per the direction of engineer in charge.Statue base: 4\" feet height Reinforced cement concrete structures (L.S)(Payment to be made as per actual measurement) |
| 144 | Electrification (internal & external) and Compond Lighting |
| 145 | Water supply and Sanitation (external & internal) |
| 146 | Provision for Furniture andFurnishing |
| 147 | RIMPOCHE RESIDENCE |
| 148 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 149 | Site preparatory works including Clearing ofjungle , uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 150 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 151 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 152 | Sand filling in foundation in layer not exceeding 20cum including watering, ramming etc, all complete. |
| 153 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 154 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 155 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3(1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm& down size) |
| 156 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 157 | Providing, fixing & removing form work for casting R.C.C items as indicated below |
| 158 | Foundation Footing |
| 159 | Foundation Column |
| 160 | Plinth Beam |
| 161 | Column |
| 162 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 163 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. |
| 164 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm (average) 1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 165 | Providing and Laying 20mm thick marble in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Raj agar Plain Marble / Udaipur green marble or equivalent) |
| 166 | Providing, fitting and fixing of dressed timberframes, completely hand crafted in workshop. (katus or equivalent) in all doors. |
| 167 | Providing, fitting and fixing of designer timberframes, completely hand crafted in workshop. (katus or equivalent) in all windows. |
| 168 | Providing fitting and fixing in position of designer fully paneled door shutters designed and handcrafted in workshops of teak timber or equivalent excluding steel butt hinges, tower bolts, handles, door knobs, screws etc all complete. |
| 169 | Providing fitting and fixing in position of designer fully paneled window shutters designed and handcrafted in workshops of teak timber or equivalent including steel butt hinges, tower bolts, handles, handles,eye hooks, screws etc all complete. |
| 170 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 171 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in walls etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 172 | Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and primingall complete. |
| 173 | Providing and painting with Aluminum paint two or more coats on new surface to give an even shade including cleaning and preparing the surface complete. New surface |
| 174 | Providing and French spirit polishes two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete. |
| 175 | Providing, fitting, fixing of 24 BWGGP sheet roofing with G.I. hooks, bolts and nut 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt)and paintedin lapping with bitumen, GI limpet washers, including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete. |
| 176 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete. |
| 177 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG pre-painted (HULLAS) Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers etc. all complete. |
| 178 | Providing fitting & fixing 16mm thick valley of 90cm overall width in plain pre-painted (HULLAS) sheet class I fixed with GI J or L hooks, bolts and nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), GI limpet and bitumen washers etc. all complete. |
| 179 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 180 | Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 181 | Provision for providing and laying Cladding of natural selected hard dressed stone as per direction of engineer in charge & Providing and layingSikkimies Traditional Laripa Work & Design (Dragon, Tinghri, Pema, Norbhu, Chimindah, Samtha, Pem, Motiq, Khinaqh and Patta)including carving, painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface,excluding the cost of cement, sand, carriage of materials, Scaffolding but including the cost of primer and enamel paint, all complete. all complete. |
| 182 | Doors and Window Fittings |
| 183 | Providing and fixing M.S. pressed bright finished butt hinges with necessary screws etc. complete. |
| 184 | Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete. |
| 185 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. |
| 186 | Providing, fitting and fixing handles 125mm size with necessary screws etc complete. |
| 187 | Providing and fixing M.S. or oxidized M.S. Hook and Eyes with complete set. |
| 188 | Provision for yard Development and site levelling works (Payment to be made as per actual measurement) |
| 189 | Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in :3:6c.c. (1cement, 3 sand, 8 clean hard graded stone ships of size 40mm)including bond stone, through stone of size 150mm x 150mm x450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8clean hard stone aggregate of size 40 mm and down) andcuring etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 190 | Cost of Haulage ofNon-stock materials (51km) |
| 191 | Loading and Unloading |
| 192 | Haulage |
| 193 | Cost of Haulage ofNon-stock materials (51 Km) |
| 194 | Loading and Unloading |
| 195 | Haulage |
| 196 | Construction of Thashak |
| 197 | Construction of Sheda |
| 198 | Construction of Guest House |
| 199 | Construction of 2 nos of Entry Gate , boundary Fencingparking and view point. |
| 200 | Construction of 3-storey main monastery |
| 201 | Construction of Chamkhang |
| 202 | Landscapping, yard development, walkways, Beautification etc. |
| 203 | Construction of integrated museum and library |
| 204 | Construction of cafeteria |
| 205 | Construction of Admin block Souvenir Shops & Staff Quarter |
| 206 | Construction of Chimi lakahang |
| 207 | Construction of Meditation Hall |
| 208 | Construction of convention Hall |
| 209 | Site -3: Development & Upgradation of Existing Temple |
| 210 | Construction of Approach Road and Parking |
| 211 | Construction of boundary Fencing & courtyard Patio |
| 212 | Upgrdation of Existing Temple |
| 213 | Construction of Pujari Niwas & Dharamshala |
