Public Works Roads Department has published Redevelopment Of Santisthal (Bharat Ratna Gopinath Bordoloi Samadhi Sthal) At Silpukhuri, Guwahati Under Sopd (G) For The Year 2023-24.. Submission Date for this Tender is 26-02-2024. Building Work Tenders in kamrup Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | CIVIL WORK: Demolishing brick work manually/ by mechanical means stacking of including serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in- charge. In cement mortar |
2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge, |
3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts complete and stacking etc. within 50 meters lead area 3 sq meters and below |
4 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
5 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Up to 10 mm thick |
6 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal Of unserviceable material within 50 meters lead as per direction of Engineer-in- char e : In cement mortar |
7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
8 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
10 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed. b Engineer-in charge. |
11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in all kinds of soil |
12 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
13 | Supplying chemical emulsion in sealed containers including specified. delivery as Chlorpyriphos/ Lindaneemulsifiable concentrate of 20% |
14 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration |
15 | Construction of 900 mm wideplinth protection in 1:3:6 (lcement: 3 coarse sand: 6 graded Stone aggregate 20mm nominalsize) PCC over 75mm bed of dry brick bat 50-75mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth to maintain adequate slope away from building complete with site dressing, compaction and levelling by ramming and watering. Contractor shall keep provision of clearance/underpass for rainwater/plumbing pipes as per site condition and as per instruction b site in charge. |
16 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/ Portland Slag cement admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level Concrete of M15 grade with minimum cement content of 240 kg/cum |
17 | Providing and laying damp- proof course 40mm thick with cement concrete 1:2:4 (1 cement 2 coarse sand (zone-111) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) With F.P.S. non-modular bricks |
18 | Brick work with common bumt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
19 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand |
20 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, base for columns etc. |
21 | Centering and shuttering including strutting, propping etc. and removal of form for retaining walls walls (any thickness) including attached pilasters, buttresses plinth and string course fillets, kerbs and site s etc. |
22 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access Platform |
23 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajas, corbels etc. including edges |
24 | Centering and shuttering including strutting, propping etc. and removal of form for Arches, domes, vaults up to 6 m span |
25 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments Posts and Struts |
26 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth girders, bressumers and cantilevers |
27 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1 :1.5:3 (1 cement : 1.5coarse sand (zone-111) dewed from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
28 | Reinforcement steel @1.5% vol of concrete Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all compIete up to plinth level: Themo-Mechanically Treated bars of grade Fe-500D or more. |
29 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (1 Cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded store aggregate 20 mm nominal size derived from natural sources) |
30 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor We level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
31 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 150 up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
32 | Reinforcement steel @2% vol of concrete Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Themo-Mechanically Treated bars of rade Fe-500D or more. |
33 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot tubes finished seamless |
34 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix in (1 cement: 4 fine sand) |
35 | Providing and laying vitrified floor tiles in different sizes (thickness to be pacified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (l cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with notch trowel, plier, wedge clips of required thickness , levelling system and rubber mallet for placing the tiles gently and easily for Glazed vitrified tiles matt/antiskid finish of size 1200 x 600 mm or 200 x 1200 mm plank type |
36 | Providing and laying vitrified floor tiles in different sizes (thickness to be pacified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (l cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with notch trowel, plier, wedge clips of required thickness , levelling system and rubber mallet for placing the tiles gently and easily for Glazed vitrified tiles matt/antiskid finish of size 600 mm x 600 mm |
37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, overthe plastered wall surface to prepare the surface even and smooth complete. |
38 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having voe less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer a lied 0.90 litre/10sqm. |
39 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
40 | Finishing with Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied@ 0.90 Itr/ 10 sqm over an under coat of primer applied @ 0.80 Itr/ 10 sqm of approved brand and manufacture |
41 | 52 mm thick æment concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed@21itre per 50 kg of cement or as per manufacturer"s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
42 | Prov iding and fixing 1 st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar I :3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white æment mixed with pigrnent of matching shade complete. |
43 | Providing and fixing exterior slate wall tiles grade conforming to IS: 15622 thickness to be specified by the manufacturer), of approved make, in all colors, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matchin shade complete. |
44 | Supply and installation of 10 mm thick toughened glass railing complete with SS 304 grade balustrade and top tail as per approved design complete with necessary fasteners screws etc. |
45 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile |
46 | Supply and installation of WPC trellis of approve design and make complete with lifting, mounting, finishing complete with metal framework along with necessary screws , bolts anchors etc. make Everwood or equivalent |
47 | Supply and installation of 8mm layered thick double polycarbonate sheet fixed to metal framework complete with sealant, necessary screws, washer etc . (metal frame shall be aid extra) |
48 | Supply and installation of WPC louvered screen on favade as per approved design complete with aluminum channel supports, floor plates and necessary fasteners etc. |
49 | Prov iding and fixing 1 st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar I :3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white æment mixed with pigrnent of matching shade complete. |
50 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. |
51 | 40mm thick fine dressed stone flooring over 20mm (avarage) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stone |
52 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, color and texture laid over 20 mm thick base cement mortar (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing,curing,moulding and polishing etc edges to give high gloss finish complete etc. at all levels. Granite stone slab color black Che/ Ruby red |
53 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and ccnforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand)jointing with grey cement slurry @ 3.3 kg/ sqm including groutingthejoints with white cement and matching i ents etc. complete. |
54 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
55 | Providing and fixing factory made single extruded WPC ( Wood Polymer Composite) solid door/window/Ceosetory windows other Frames / Chowkhat comprising of virgin PVC Polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast]lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm |
56 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of Kvalue 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-ln- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick |
57 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
58 | Supplying and fixing shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part I and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
59 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
60 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
61 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade l, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
62 | Brass 150 mm floor door stopper weighing not less than 0.357kg |
63 | Supply and installation of brass Door handle of approved design |
64 | Supply and installation of Brass Aldrop of approved make and design complete with necessary screws nuts etc. |
65 | Supply and installation of 8" Brass tower bolt of approved make and design |
66 | Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles |
67 | Brass butt hinges (heavy type) :0.75x65x4.0 mm (weighing not less than 0.20 kg |
68 | Brass handles 125 mm with late 175x32 mm |
69 | Supply of Brass Pad lock with 4 lever. Make Godrej or equivalent |
70 | Supply and Installation of false exterior grade WPC false ceiling complete with necessary GI channels , suspender, screws edge lining etc. |
71 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
72 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm |
73 | Supply and installation of Book shelf of approved design. Make Godrej Featherlite or equivalent |
74 | Supply and installation of reading table of approved Godrej, Make design. Featherlite or equivalent |
75 | Supply and installation of reading chair of approved design. Make Godrej, Featherlite or equivalent |
76 | Supply and installation of outdoor table and chair of approved design. Make Godrej, Featherlite or equivalent |
77 | LANDSCAPE DEVELOPMENT: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of gilth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
78 | Surface dressing Of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
79 | Anti -termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge. |
80 | Supply and installation of MS, ACP composite WPC, Decorative swing type main door as per approved design complete with 2 coats of red oxide primer two coats of painting to create an even shade |
81 | Supply and installation of MS Decorative railing as per approved design complete with 2 coates of red oxide rimer |
82 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with (excluding cost of water imported earth, sludge or manure . |
83 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment |
84 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
85 | Uprooting weeds from the trenched area after 10 to 15 days Of its flooding with water including disposal of uprooted vegetation. |
86 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately. |
87 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions |
88 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be aid for se aratel |
89 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixin excluded) |
90 | Providing & laying Selection no. I doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, as per direction of officer in charge |
91 | Providing and stacking of Plumeriarubra of height 120- 150 cm, with 3-4 branches and thickstem in big size HDPE bags as per direction of the officer-in-charge. |
92 | Providing and stacking of Plumeria alba dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge |
93 | Providing and stacking of Azadirachtaindica( Neem ) of 120-130cm in big height polybag of size 25 cm as per direction of the officer-in- charge. |
94 | Providing and stacking of Ficusbenjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in gunny bags of size 25 cm as per direction of the officer-in- charge. |
95 | Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25-30 cm well developedin big size HDPE bags as per direction of the officer-in-charge. |
96 | Providing and displaying of Dracaena mahatma having ht. 45 cm, 30 cm to well developed, fresh and healthy foliage in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in- charge |
97 | Providing and displaying of well Dracaena pendanus, developed, having 6 to 8 suckers withhealthy foliage in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge |
98 | Providing and stacking of Chandni dwarf of height 15-20 cm. well branched in earthen potsof size 20 cm as per direction of the officer-in- charge. s per direction of the officer-in-charge |
99 | Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen of pots size 20 cm as per direction of the officer-in-charge. |
100 | Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
101 | Providing and stacking of Clerodendrumineme having ht. 30 cm 25 cm to multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
102 | Providing and stacking of Wedeliatrilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the . I officer-in-charge |
103 | Providing and Displaying Portulaca hybrid variety with well-developed fresh & healthy plants |
104 | Providing and Displaying Asiatic lilly hybrid variety (3 in each pot one) having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in- charge. |
105 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refiiiing etc. External work 20 mm dia nominal bore |
106 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
107 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore. |
108 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore |
109 | Providing and fixing gun metal non- return valve of approved quality (screwed end) Horizontal |
110 | Providing and fixing Low operating pressure sprinkler (LOPS) Single noule sprinkler having discharge capacity of 5.5 cm/ hr& radius of coverage 15-17 m at 2.5 bar with 32 mm BSP fm brass connection & brass swing arm (Part circle) M-ZL22 LOPS Water sprinkler or similar make complete as per direction of EIC |
111 | Providing & installingcommissioning of pump motor having discharge 1.8 Ips and head 23 meters with 3000 rpm 3 phase 210 Volt 1 Hp of model Kirlosker make Monobloc Pump, KDS 128+, 1 HP, Single Phase, 210 Volts, Size 40mm X 40mm or equivalent BIS approved make having similar performance of discharge, head, voltage & power |
112 | ELECTRICAL WORKS: Wiring for light point" fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular pla!e, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C |
113 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduits 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
114 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq mm earth wire |
115 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
116 | Installation, Testing, Commissioning of wall bracket (ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting complete with all accessories including connections etc. as required. |
117 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6. A modular socket outlet and 2 Nos 5/6. A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings) |
118 | Supply, installation testing and commissioning of ceiling mounted 12 watt LED downlight of approved design from Havels, Changi or equivalent make. |
119 | Supply, installation testing and commissioning of ceiling mounted 6 watt LED downlight of approved design from Havels, Changi or equivalent make. |
120 | Supply and installation of ceiling fan of havells or equivaient make |
121 | Supply and installation of Exhaust fan of havells or equivaient make |
122 | Supply , installation testing and commissioning of LED profile cove light as per approved design from Havels, Changi or equivalent make |
123 | Supply and installation of 3W Of footlight LED Panasonic,Havells , jaguar or equivalent make. |
124 | Supply and installation of UPS for emergency lights complete with all necessary wiring. (excludin cost of wire) |
125 | Supply and installation of IP65 grade cast iron spike focus lights of approved design and cone angle, color. Make Havelles, Changi or equivalent |
126 | Supply, Installation, Testing, Commissioning Of Main line Wiring of sub main / main , wiring with following size of PVC insulated multistranded copper wire as per IS:694, 1.1 KV grade in RPVC medium grade conduit as per IS:9537 part Ill complete with heavy duty RPVC conduit accessories like circuit boxes bends etc. The conduit work should include cutting & refilling the chases etc. as required including termination. 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
127 | Supplying, fixing , testing and commissioning of single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface; recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, powder interconnections, pained including earthing etc. as required. (But without MCB/RCCB/lsolator) 16 way, Double door |
128 | Supply and installation of RCCB of Schneider , Havells or equivalent make |
129 | Supply and installation of MCCB of Schneider , Havells or equivalent make |
130 | Supply and installation of 4 pole RCCB with earth leakage sensitivity of 30mA of Schneider Havells or equivalent make |
131 | Supply and installation of IP65 rade rofile cove Iight complete with Plexiglas cover as per design |
132 | Supply and installation of IP65 grade outdoor bollard light of approved make complete with cement casted pedestal |
133 | Supply, installation,testing and commissioning Of IP65 grade cast iron decorative pole light of approve design. Make Havells Changi or equivalent |
134 | PLUMBING: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Make Jaquar Hindware Equivalent |
135 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Make Jaquar Hindware Equivalent |
136 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. Make Jaquar Hindware Equivalent |
137 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. Make Jaquar Hindware Equivalent |
138 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer- in - charge. Make Jaquar Hindware Equivalent |
139 | Providing and fixing P.V.C. waste pipelfor sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia. |
140 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Make Jaquar Hindware Equivalent |
141 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
142 | Providing and fixing soil, waste and vent pipes : 100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS: 15905 |
143 | Providing and fixing P TMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long topel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
144 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore of approved make and design |
145 | supply and installation of Chlorinated Polyvinyl chloride (CPVC) pipe 20 mm nominal dia |
146 | Supply and installation of Floor trap of a approved make |
147 | Supply and installation of PVC water tank of 2200L capacity of approved make |
148 | MISCELLANEOUS WORK: Artwork touchups framing painting etc to be done by qualified artist |
149 | Supply and installation of Sandstone decorative shed approved design of complete with necessary installation arrangement lights etc |
150 | Supply and installation of surface mounted 3D metal I text signage as per design complete with necessary screws,scaffoldingetc at any height up to 9m height. |
151 | Supply and installation of natural stone bollard of approved shade and design complete with SS chains |
152 | Supply and installation of children"s 6 seater merry go round made of mild steel as per approved design and make. |
153 | Suppiy and installation of MS, GI and FRP composite children"s multiply (Slider, climber, swing ) equipment of a roved color and make |
154 | Supply installation testing and commissioning of Adjustable Inverter AC, 1.5 Ton, 5 star- 185V of voltas model Vectra Elite or equivalent complete with necessary accessories copper pipe, wiring , drain pipe etc. |
155 | Supply and installation of stand alone wifi smoke detector with inbuilt alarmsystem of Honeywell or equivalent make |
156 | Supply and installation of ABC type powder based fire extinguishers of 4.5 kg ca aci of approved make |
157 | Supply, installation testing and commissioning of wired 4K resolution IP65 outdoor CCTV camera with night vision complete with necessary accessories of approved make. |
158 | Supply and installation of CAT6 wire as per approved layout connecting the specified points align with casing, clipping etc. |
159 | Supply and installation of desktop of computer approved make having at least I TB storage space , 8 GB Ram along with peripherals viz monitor, keyboard , mouse etc and genuine operating system |
160 | Supply and installation of pre-fabricated garden seating of approved design and make |
161 | Outdoor IP 65 Speakers of model Bose Free Space 360-P Series 11 Frequency Environmental speaker or equivallent |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail