Military Engineer Services-MES has published Tender For Special Repair To Bldg No T 18 In D Zone And Addn Alt To Bldg No T 112 In C Zone, Toilet In Bldg No T 20 Sm Barrack And Bldg No T 4 1 Triveni Complex Under Age Br I At Rms. Submission Date for this Tender is 09-03-2024. Building Work Tenders in Shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Feb-2024 | AMENDMENT IN BOQ 2 FOR SPECIAL REPAIR TO BLDG NO T 18 IN D ZONE AND ADDN ALT TO BLDG NO T 112 IN C ZONE, TOILET IN BLDG NO T 20 SM BARRACK AND BLDG NO T 4 1 TRIVENI COMPLEX UNDER AGE BR I AT RMS | BOQ | 09-03-2024 |
| 2 | 26-Feb-2024 | AMENDMENT IN BOQ FOR SPECIAL REPAIR TO BLDG NO T 18 IN D ZONE AND ADDN ALT TO BLDG NO T 112 IN C ZONE, TOILET IN BLDG NO T 20 SM BARRACK AND BLDG NO T 4 1 TRIVENI COMPLEX UNDER AGE BR I AT RMS | BOQ | 09-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. |
| 4 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed. |
| 5 | Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed. |
| 6 | Demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 7 | Dismantling of chicken wire lathing complete all as specified and directed. |
| 8 | Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified and directed. |
| 9 | Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed. |
| 10 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 11 | Dismantling of wrought iron or mild steel work of any description etc complete all as specified and directed. |
| 12 | M & L for PCC 1:4:8 type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed. |
| 13 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsetc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc. laid over and including screed bed of 15 mm thick in CM (1:6)etc complete all as specified and directed. |
| 14 | Same as per ser No 13.00 but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 15 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat. |
| 16 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 17 | S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 18 | M/L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and directed. |
| 19 | S/F 2nd class hard wood scantling as in framed worketc clean sawn complete all as specified and directed. |
| 20 | All as per item No. 19.00 as above but except timber complete all as specified and directed. |
| 21 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-painted self embossed, textured designer boardE-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both waysfixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. |
| 22 | M & L 25mm thick and 200 mm width second class hard wood boarding , plained one side with butt joints as ineaves boards complete all as specified and directed. |
| 23 | M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed |
| 24 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed. |
| 25 | M&L for 30 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed. |
| 26 | M/L 35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and directed. |
| 27 | M/L 30mm thick 2nd class hard woodGlazed and skelton window and ventilatorshutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) etc complete all as specified and directed. |
| 28 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed. |
| 29 | M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size etc complete all as specified and directed. |
| 30 | M&L butt hinges, medium weight 75 mm long sizeetc complete all as specified and directed. |
| 31 | S/F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and directed. |
| 32 | S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long etc complete all as specified and directed. |
| 33 | S&F Aluminium handle cast type anodised 150 mm long etc complete all as specified and directed. |
| 34 | S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed. |
| 35 | S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) etc complete all as specified and directed. |
| 36 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane etc complete all as specified and directed. |
| 37 | S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each paneetc complete all as specified and directed. |
| 38 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 39 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing etc complete all as specified and directed. |
| 40 | M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius in CM 1:6 etc complete all as specified and directed. |
| 41 | M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and directed. |
| 42 | M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed and bird proofing in walls incl all laps cutting and waste complete all as specified and directed. |
| 43 | M&L 15mm thick plastering in CM 1:4 on one side of lathing in two separate layers even and smooth without using extra cement complete all as specified and directed. |
| 44 | M&L 10 mm thick plastering in CM 1:6 the other side of lathing finished even and smooth without using extra cement complete all as specified and directed. |
| 45 | M & L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement. |
| 46 | M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and directed. |
| 47 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface and applying one coat of primer, on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 48 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applyingone coat of oil bound distemper of approved shade/tint etc complete all as specified and directed. |
| 49 | M&L for preparation of new plastered surfaces and applying two coats ofcement base paint of approved shade on walls including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 50 | M&Lforcomplete removal of existing treatement on old plastered surface of wall & applying two coats of cement base paint over cement primer complete all as specified and as directed. |
| 51 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed. |
| 52 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying onecoat of synthetic enamel paint etc complete all as specified and directed. |
| 53 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 54 | M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 55 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing etc complete all as specified and directed. |
| 56 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing etc complete all as specified and directed. |
| 57 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing etc complete all as specified and directed. |
| 58 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing etc complete all as specified and directed. |
| 59 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and directed. |
| 60 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and directed. |
| 61 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification etc complete all as specified and directed. |
| 62 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification etc complete all as specified and directed. |
| 63 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 64 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed. |
| 65 | S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed. |
| 66 | S&F in repairs vitreous china squatting pan "orissa" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe)complete all as specified and directed. |
| 67 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as directed. |
| 68 | S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket,inlet ball valve, floathandle and flush pipe (for EWC or WC)etc complete all as specified and directed. |
| 69 | S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed. |
| 70 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed. |
| 71 | S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixedetc complete all as specified and directed. |
| 72 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers etc complete all as specified and directed. |
| 73 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and directed. |
| 74 | S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 75 | M&L cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains etc complete all as specified and directed. |
| 76 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork etc complete all as specified and directed. |
| 77 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 78 | S&F in repairsfor Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and ringsetc complete all as specified and directed. |
| 79 | M&L second class hardwood plain fillets exc 13sqcm and notexc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads. |
| 80 | S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor all as per specified. |
| 81 | S&F PVC (SWR) 110mm dia bends in any radius etc complete all as specified and directed. |
| 82 | S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor etc complete all as specified and directed. |
| 83 | M & Lfor 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 84 | S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 85 | S & F 110mm borePVC (SWR) branch piece, single (single Y) equal or unequal |
| 86 | Surface excavation n exc 15cm deepin soft/loose soil etc complete all as specified and directed. |
| 87 | Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts wells cesspits man-holes pier holes etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil etc complete all as specified and directed. |
| 88 | M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) etc complete all as specified and directed. (NOTE:-WPC will be measured and paid separately) |
| 89 | Supply only Integralwater proofing compound etc complete all as specified and directed. |
| 90 | M&L for Cement concrete 75mm thick, 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed. |
| 91 | M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 92 | M&L Vitrified Ceramic tiles dark shade10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 93 | All as per item No 92.00 here-in-before but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 94 | S&F plates plain or chequred channels square cut or notched (ordinary and counter sunk) forming holes without any attachment confirming Fe-410W (Gde-E-250) quality-A etc complete all as specified and directed. |
| 95 | Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed. |
| 96 | S&F Non asbestos fibre cement building boards 4mm thick fixed with screws in ceiling over and including Anodised aluminium snap gridframe work for false ceiling all as specified complete fixing arrangment complete all as directed by Engineer-in-Charge. (Make,colour and pattern approved by GE/Engr-in-Charge) |
| 97 | M&L for preparation of new steel surfaces n. exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. |
| 98 | S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long etc complete all as specified and directed. |
| 99 | S&F stainless steel Butt hinge, medium weight, cold rolled mild steel of 100 mmsize etc complete all as specified and directed. |
| 100 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 101 | S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. |
| 102 | S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and directed. |
| 103 | S & F 4 mm (plus minus 0.50 mm) thick Sheet glass, ordinary quality and glazing with oil putty or in rubber beading with one way film in squares exceeding 0.5 Sq. M in each pane etc complete all as specified and directed. |
| 104 | Use & waste of formwork for lintel beam flat rough finished etc complete all as specified and directed. |
| 105 | Form work to Chajja, troughs and similar items etc complete all as specified and directed. |
| 106 | Form work to edges of concrete surface exc 10cm and n.exc 20cm wide rough finished surface etc complete all as specified and directed. |
| 107 | MS TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed) etc complete all as specified and directed. |
| 108 | M & LMS TMT bars 6 mm to 8 mm dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed) for stirrups/binders etc complete all as specified and directed. |
| 109 | M & LReinforced Cement Concrete(Nominal mix)1:2:4Type B-1(using 20mm graded aggregate) as in Beams, cantilevers, bressumers, lintels over 1.5span incl demolition of existing etc complete all as specified and directed. |
| 110 | All as per item No 109.00 here-in-before but as in fins, chajja etc and the like. |
| 111 | M&L for Cement Concrete 1:4:8 Type D-2(using 40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 112 | M&L Damp proof coursee in cement concrete 1:2:4, type B-0 of 40mm thick to horizontal surfaces including necessary formwork complete all as specified and directed . |
| 113 | M&L Hardcore of gauge n exc 63mmbut n. exc 100 mm of broken stone or bouldersdepositedspread and levelled in layers n. exc 15 cm thick watered and rammed to a true surface etc complete all as specified and directed. |
| 114 | M&L Sand filling under floor or in foundationincluding watering and rammingetc complete all as specified and directed. |
| 115 | M&L PCCtype B-1 1:2:4 (20mm graded aggregate) 25mm thick as in subbase of flooring finished even and fair using extra cement etc complete all as specified and directed. |
| 116 | M&L 12 mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required etc complete all as specified and directed. |
| 117 | Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm in soft/loose soil etc complete all as specified and directed. |
| 118 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed. |
| 119 | M & L for Reinforced Cement Concrete Type B1 1:1.5:3 (using 20 mm graded granite stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. |
| 120 | M & L for Reinforced cement concrete type B1 1:1.5:3 in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 121 | M & L for Reinforced cement concrete type B1 1:1.5:3 type B-1(using 20 mm graded stone aggregate) in chajjas etc complete all as specified and directed. |
| 122 | Use and waste for formwork to sides of concrete foundation,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work;vertical or to batter etc complete all as specified and directed. |
| 123 | Use & waste of formwork for Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as directed by Engr-in-Charge. |
| 124 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer boardE-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and directed. |
| 125 | S&F 30mm thick Flush shutters, solid core construction, with plain MDF board exterior grade 1 etc complete all as specified and directed. |
| 126 | S&F 150 mm long MS barred tower bolts etc complete all as specified and directed. |
| 127 | S&F MS handle 150mm long oval type etc complete all as specified and directed. |
| 128 | S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed. |
| 129 | S&F for steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded |
| 130 | All as per item No 129.00 here-in-before but without glazing bars |
| 131 | M & L Preparing the new surfaces of walls plastered, and applyingtwo coats of exterior weather paint over one coat of primer of wall surface complete all as specified and as directed. |
| 132 | M & L for virtrified heavy duty full body digital paving tiles 10 mm thick (square/rectungular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor etc and set and jointed in neat cement slurry and pointed in white or coloured cement to matdh laid over 15 mm thick screed bed or bedding layer in cemetn mortar 1:4 over PCC 50 mm thick in PCC 1:3:6 (using 20 mm down stone aggregate) etc complete all as specified and as directed. |
| 133 | Supply & fixing 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with top) hoisted and fixed in position etc complete all as specified and as directed. |
| 134 | S&F 20mm boreball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass etc complete all as specified and as directed. |
| 135 | S&F brass CP wall mixture chromium plated 15 mm bore with capstan head, screwed reed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe as etc complete all as specified and as directed.. |
| 136 | M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth etc complete all as specified and as directed. |
| 137 | S&Ffor 15mm dia of pipe stopvalves(Concealed type) ,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed. |
| 138 | S/Fbrass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and as directed. |
| 139 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long etc complete all as specified and as directed. |
| 140 | S&F towel rail 600mm long aluminium anodised of brass CP fixed with and including CP brass screws etc complete all as specified and as directed. |
| 141 | M&L for Granite (of any type) tiles 18-20mm as in platform thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of granite stone including grinding and polishing with nosing over 10 mm screed bed in CM 1:4 complete all as directed by Engr-in-Charge. |
| 142 | PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring joint fixed to walletc complete all as specified and as directed. |
| 143 | PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall etc complete all as specified and as directed. |
| 144 | S&F Compound girders andstanchions, lattice girders, aerialmasts, staging for water tanks andthe like including caps, bases,splices etc. built up from two or morebeam or channel sections or angles with plates, including all lattice bars usingFe 410-W(Gde-E- 250) quality-A Fe etc complete all as specified and as directed. |
| 145 | S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed. |
| 146 | M/L 30mm thick 2nd class hard woodGlazed and skelton window and ventilatorshutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) etc complete all as specified and as directed. |
| 147 | S/Fbrass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and as directed. |
| 148 | Precast RCC (1:2:4) type B-1 in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:4 etc complete all as specified and as directed. |
| 149 | M&L for DWCPE (SN8) 150 mm (ID) diameter Pipes laid in trenches complete all as specified and directed. |
| 150 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 151 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make : Richa/Finolex/RR Kabel, Make of Caping & Casing : Prestoplast /Richa /Supreme |
| 152 | (a) Onelight/Fan pointcontrolled by one, one way switch . |
| 153 | (b) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 154 | (c) One 3 pin socket outlet 5 Amps on the switch socket combination. |
| 155 | All as per item No- 151 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make : Richa/Finolex/RR Kabel, Make of Caping & Casing : Prestoplast /Richa /Supreme |
| 156 | Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesand sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. |
| 157 | (a) Onelight/Fan pointcontrolled by one, one way switch . |
| 158 | (b) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 159 | (c) One 3 pin socket outlet 5 Amps on the Independent board. |
| 160 | All as per item No-153 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 161 | M&L for Modular Switch 1 way 6A,1 moduleetc complete all as specified and as directed.Make : Havells/Legrand/Anchor |
| 162 | M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed Metc etc complete all as specified and as directed.complete all as specified and as directed.ake : Havells/Legrand/Anchor |
| 163 | M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed Make : Havells/Legrand/Anchor |
| 164 | M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed Make : Havells/Legrand/Anchor |
| 165 | M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed |
| 166 | M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal |
| 167 | S&F for Metal flush box 3 Module complete all as specified and as directed. |
| 168 | S&F for Metal flush box 6/8 Module complete all as specified and as directed. |
| 169 | S&F for White cover plate with frame3 Module complete all as specified and directed. |
| 170 | S&F for White cover plate with frame 6/8 Module complete all as specified and directed. |
| 171 | M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC Conduit pipe including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 172 | M&L for Switch piano flush type single pole, one way 6A etc complete all as specified and as directed Make :Anchor/Legrand/Kinjal |
| 173 | M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directede :Anchor/Legrand/Kinjal |
| 174 | M&L for Switch Socket combination, 2 in 1, 3 pin 6A flush type etc complete all as specified and as directed Make :Anchor/Legrand/Kinjal |
| 175 | M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed Make :Anchor/Legrand/Kinjal |
| 176 | M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed Make :Anchor/Legrand/Kinjal |
| 177 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.Make :Anchor/Legrand/Kinjal |
| 178 | S&F for, LED light fitting 1 x20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips |
| 179 | S&F for, LED light fitting 1 x10 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips |
| 180 | Taking down existing unsv building security light fitting of any description with accessories and M&L for LED 1x25W Security light fitting, drawn through including GI bracket of suitable sizelight grade 1.4 mtr bend to shape and MS clamps made out of flat iron of size 40x4 mm -02 Nos including nuts, bolts, washer as required and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed. Make:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips |
| 181 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens |
| 182 | Supply and fixingMCB SPN 32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old UNSVcomplete all as specified and as directed. Make : Legrand Cat Part No 408618/ABB/Siemens |
| 183 | Supply and fixingMCB SPN 40-63 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old UNSVcomplete all as specified and as directed. Make : Legrand Cat Part No 408618/ABB/Siemens |
| 184 | Supply and fixingMCB SP 6-32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old UNSV complete all as specified and as directed.Make:- Legrand Cat No 408587-95 /ABB/Siemens |
| 185 | M&L for metal clad AC socket point single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make: Havells/HPL/Legrand |
| 186 | Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power * input 27 watt with 10% tolerance *, motor insulation B type , 230-240V 50Hz AC supply 350 rpm , * 225 CMMair delivery*, service value *minimum 7.4* with complete set 3 blade , canopy,down rod , Shackle remaining all accessories including nut & bolt washer as required & directed . Make :Khaitan, Bajaj, Havell"s, Orient Note : Old Ceiling fan deposit MES Store (AGE E/M) |
| 187 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm etc complete all as specified and as directed |
| 188 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed. |
| 189 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete incl taking down old UNSV all as specified and as directed. Make :Havells/Bajaj/CG/Philips |
| 190 | Supply and fixing LED luminaire 600 mm x 600 mm, 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete incl taking down old UNSV all as specified and as directed. Make :Havells/Bajaj/CG/Philips |
| 191 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 192 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Havells/Richa/Gloster |
| 193 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed. |
| 194 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 195 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. |
| 196 | M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 197 | M&L for laying brick sub class "B" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 198 | Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint |
| 199 | Supply & laying tubes " Medium grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in of size 40 mm dia bore complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 200 | Supply & laying tubes " Light grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 201 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
