Public Works Department-PWD has published Tender For Renovation Of Bathroom, Kitchen, Almieah And Wardrob, Replacement Of Damaged Tiles, Fitting Of Curtain Rod, Aluminum Partition And Other Work.. Submission Date for this Tender is 23-02-2024. General Hardware Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25mm. DAR 15.23.1 |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc 15 mm nominal outer dia pipes, (SDR-11) |
| 3 | Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. |
| 4 | Providing and fixing CIMBA Rimless One Piece with Seat Cover Size-660x340x720 mm. Cat No-S1013213S Trap 300 mm Cera make, including Cutting and making good the walls and floors wherever required: |
| 5 | Providing and laying rectified Glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours White, lovry GreyFume Red Brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 |
| 6 | Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. 8.31 |
| 7 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter.18.22.1. |
| 8 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighting npt less than 810 gms.15 mm nominal bore.18.50.1 |
| 9 | P/F C.P. brass Angle Valvefor basin mixture and geyser points ofapproved quality confirming to IS:8931.15 mm nominal bore.18.53.1 |
| 10 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thickhard board groung fixed to wooden cleats with C.P. brass screws and washers complete.17.31 |
| 11 | P/F Wash Basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern white vitrous china wash basin size 630x450 mm with a pair of 15 mm cp brass piller taps.17.7.1. |
| 12 | P/F stainless steel A ISI 304(18/8) kitchen sink with C.I. brackets and stainless steel plug 40 mm .kitchen sink with drain board .510x 1040 mm depth 250 mm.17.10.1.1. |
| 13 | Providing and fixing ISI marked 35 mm thick flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. DAR N0-9.21.1 |
| 14 | Providing and fixing of Glazed shutters for doors and windows and clerestory windows using 4 mm thick float glass panes including ISI marked stainless steel butt hinges of required size with necessary Screws. First class teak wood. 35 mm thick |
| 15 | Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/ Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron) DAR-21.1.2.2, |
| 16 | Providing and fixing of glazing in Aluminium door/window, Ventilator shutter and Partitions etc, with EPDM Rubber/ neoprene gasket etc, complete as per the architectural drawings and the direction fo E/I (Cost of aluminium snap beading shall be paid in basic item with APC Sheet (Aluminium Power Coated Sheet). |
| 17 | Providing And Fixing Float Glass Panes 5.00 mm thick Glass Panes,weight not less than 12.50 kg per sqm (DAR-9.7.7.2) |
| 18 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body weight upto 36 kg to 80 kg and door with from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc complete.(DAR -9.84) |
| 19 | Providing and fixing S.S. pipe curtain rods with S.S brackets and other fittings 20 mm dia (heavy type). |
| 20 | Providing and fixing18 mm thick gang saw cut mirror polished premoulded and prepolished matchine cut for kitchen platform vanity counters, window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) jointstreated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing of edges to give high gloss finish etc complete at all levels. Granite stone slab of colour black cherry/ruby red, Area of slab over 0.50 sqm DAR 8.2.2.2. |
| 21 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading DAR 9.7.8 |
| 22 | Providing and Fixing of Wall to Wall Wooden Almirah with 19mm thick Century Ply Board ISI marked lncluding Laminated Both Side 1 mm thick Sunmica Supirior quality Fixing with Glue and Nails etc S.S.Handle, S.S.Hinges Magnet. Lock etc. Complete work as Per Direction of Engineer in Charge. |
| 23 | Supply and fixing of box type wardrobe with 19mm thick plyboard and shutter will be provided 25mm thick prelaminated board including supply of cost of all materials, labour T&P etc required for proper compleion of work. (Based on as per actual requirment) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
