Border Security Force-BSF has published Tender For Co 08 Bedded Mahila Barrack At Bop Bashir Of 123 Bn Bsf Under Shq Bsf Gandhinagar Sh Ei And Fans. Submission Date for this Tender is 27-02-2024. Barrack Tenders in Banas Kantha Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.( Group "B"). |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required . |
| 3 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 5 | 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire |
| 6 | 2 x 6 sq. mm + 1 x 6 sq. mmearth wire |
| 7 | Supplying and drawing4 Pair, 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 8 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | Supplying and fixing of following sizes of 20 mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required of 20 MM |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections etc. as required. |
| 11 | 5/6 amps switch |
| 12 | 3 pin 5/6 A socket outlet |
| 13 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non-residential buildings). |
| 14 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing &fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16amps modular switch, connection etc. as required. |
| 15 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 16 | Supplying and fixing 3 pin 5 amps Ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 17 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 18 | Supply, installation, testing and commissioning of 20 watt LED tube fittings prewired for LED tube, complete with all accessories and LED tube directly on ceiling/ wallincluding connection with 1.5 sq. mm FRLS PVC insulated copperconductor single core cable etc as required. ( Havells / Philips/CG/Bajaj make or as approved by Enggineer in-charge) |
| 19 | Providing and fixing circular/ Hexagonal GI box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick GI sheet with its top surface hacked for proper bonding, top lid shall be screwed into the GI box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. |
| 20 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required |
| 21 | Supply and installation 300 mm steel body exhaust fan of double ball bearing light duty motor with protective bird guard and louvers shutters complete with frame in the existing opening, including, making good the damage, connection, testing, commissioning etc. as required. (USHA or Havells/Khaitan make) |
| 22 | Supply and fixing linear and compact 10 watt LED Mirror light made up of polycarbonate body including connection etc. as required. CG or its equivalent to Havells/Bajaj/Philips make) |
| 23 | Supply and fixing of 12 watt white light LEDSlim surface mounting LED panel with premium diffuser to ensure glare free & even light distribution in ceiling complete with all accessories & makingconnectionsincluding dismentling existing defected ceiling lightetc. as required. (Trim cosmo squre surface Cat. No. LHEAAKP7IL1W012Havells make or it"ssimiler make CG/Philiphs/Syska or as approved by engg incharge.) |
| 24 | Providing and fixing of smart incinerator for disposal of used sanitary pads with suitable size of exhaust pipe including connection, testin & commissioning etc as required which having following technical specification below:-i) Watt-600 Watt ii) Capacity -25-30 Pads/ day iii) Auto Cut off Function iv)Ash - after burn less than 1 gm/ Pad v) Pad storage 3-5VI ) Type - wall mounted vii) Body type Outer MS powder coated |
| 25 | Providing & fixing 1000 Watt, 24 volt single phase PWM SOLAR power package consisting of 1500 VA capacity, 24 V rated solar power conditioning unit , 3X325 Wp Solar PV Module having nominal voltage 24V, 03 nos LMCA C-10 rated ,12 V 150AH tubular solar battery including galvanized iron stand, internal wiring with PVC insulated copper wire, junction box etc as required. The solar PCU unit should consists of following:- a)Solar charge controller:- Single phase solar charge controller based on PWM technology, max input PV Current 40 A, protection against overcurrent, battery over charge, PV/Battery reverse polarity, reverse current & High temprature b) Inverter:- 24 V DC input and 220 V pure sine wave output at rated load 1500 VA @ .8 PF, efficiency>=85% c) Grid charger:- I/p voltage Range WW 175-285 & NW 190-265 +/- 10 V, Grid charging current 13+/-1A Make : Luminous / Renewsys / Inter Solar / Exide |
| 26 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 27 | 12 way , Double door |
| 28 | 6 way , Double door |
| 29 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 30 | Single pole |
| 31 | Double pole |
| 32 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with nnections, testing and commissioning etc. as required. |
| 33 | 63 Amps |
| 34 | Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade ISI marked of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (Havell"s or it"s equivalent to KEI/HPL/Polycab) |
| 35 | 3.5 x 35 Sqmm |
| 36 | 2 x 25 Sqmm |
| 37 | Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (Havell"s or it"s equivalent to KEI/HPL/Polycab) |
| 38 | 3.5 x 35 Sqmm |
| 39 | Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of following size on wall surface as required. (Havell"s or it"s equivalent to KEI/HPL/Polycab. |
| 40 | 3.5 x 35 sq. mm (clamped with 1mm thick saddle) |
| 41 | Providing, laying and fixing 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required |
| 42 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 43 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required |
| 44 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthingas required. |
| 45 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 46 | 3.5 X 35 sq. mm (32 mm) |
| 47 | Fabrication, supplying, installation,and. testing of 415V, 3 Phase 4 wire 50 HzA.C. outdoor type compartmentalized, totally enclosed and double door type weather proof/ vermin electrical distribution panel suitable size to accommodate the following mounting thereon. It shall be fabricated from 1.6 mm thick CRCA sheet complete with having complete arrangement and providing detachable gland plate at the bottom of the panel , complete with 200 amp 4 nos. Aluminium bus bar , suitable rating inter-connection ,earthing testing and commissioning etc as required. The panel shall be painted with powder coated of approved brand & shade and supplied with suitable pedastal/wall mountingand supplying & fixing of a) 200 Amp 04 nos. Aluminium bus barb) 160Amp TP MCCB 01 No. c) 125Amp TP MCCB 01 No,d) 63Amp TP MCCB 01 Nod) 02 nos. Eath studscomponent /accessories & switch gear etc complete as required (minimum size of panel 1000mm long X 800mm width x 300 mm depth) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
