Bharat Sanchar Nigam Limited-BSNL has published Tender For Sitc Of Fire Detection Panel , Rectification Of Existing Automatic Fire Detection And Fire Alarm System And Refilling Of Fire Extinguishers At Telephone Bhawan, Khordha. Submission Date for this Tender is 26-02-2024. Alarm Systems Tenders in khordha Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Testing, checking &fault finding of Automatic Fire Detection, Fire Alarmsystem comprising ofFire control panels , Fire Detectors , Manualcall points, Electronic Hooters etc.assessing the faults and material required for repairing and rectification of faults i/c rectification of minor faults, testing for proper functioning etc. complete as required. |
| 2 | Ground Floor with Main Fire Alarm Control panel (FACP) |
| 3 | 1st Floor with Local Control panels |
| 4 | Supply, installation testing and commissioning of following ZonesUL listed Microprocessor based Fire Alarm Control Panel Made of16/18 SWG CRCA sheet powder coated, finish suitable for operation with 220V 50HZ AC mains power supply with standby battery backup 24Volt DC power supply and built in charger (without batteries) , normal operating voltage 24 v DC, compatible with all types of conventional detectors, manual call points and normally opened dry contact devices, 16X2 Dot matrix display, fully compatible with UL-864 and NFPA-72 etc. complete as required as per details specifications. (make- Agni Instruments / Agni Devices/GST / Honeywell / system sensor / Ravel) |
| 5 | 4 Zone Local panel without PA system |
| 6 | 6 Zone Local panel without PA system |
| 7 | SITC of 12Vsealed maintenance free battery of not less than 7AH capacity with all accessoriesetc as reqd.(Exide /Amco/Superior) |
| 8 | Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Photo electric/ Ionization typeSmoke detector withbase (Blinking LED type) made of ABS plastic with all accessories, suitable for operation on 24v DC, internal protection class: IP23,dual pulsing LED with 3600 visibility, relative humidity:=95%;non-condensing and EN54 compliance of approved make etc. as required. (Make- Apollo / GST/ Honeywell / System sensor) |
| 9 | Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Multidetector(fixed cum rate of rise heat Detector using a thermistor, raises an alarm when the detector reaches 590C (Fixed) or when the change in temperature exceeds the rate of rise of 110C/min) withbase (Blinking LED type)made of ABS plasticand all accessories, suitable for operation on 24 v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity:=95%;non-condensing and EN54 compliance of approved make etc. as required.(Make- Apollo / GST / Honeywell / System sensor) |
| 10 | Supply, installation, testing and commissioning of electronic hooter cum speaker made of 16/18SWG CRCA sheet duly powder coated with PO red colour, output not less than 80db @25mtr, LMT with adjustable sound output of 2.5 watt,5 watt, suitable knock out for cable entry from top suitable for operation on 100/70 volt RMS AC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni) |
| 11 | SITC of manual push button station(pill box) Manual Call Point in MS Housingfor Conventional Fire Alarm System with glass for breaking up in case of fire and hammer with chain etc. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni) |
| 12 | Supply and laying of 2 core 1.5sqmm FRLS PVC insulated and PVC sheathed copper conductor armoured cable on surface/recess for looping the fire alarm devices & providing power supply to sounder cum strobes etc. as required. (ISI) |
| 13 | Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. a)2 core, 6 Sq. mm (19mm) |
| 14 | S/F ABS roundbox / MS Boxon ceiling for fixing the detectors etc as reqd. |
| 15 | Supplying & Fixing ofwall mounted Autoglow Signage Fire Exit Sign Board 3mm PVC Sheet with high Glow intensity in total Darkness. (Red and Green colour with exit symbols as per requirements) |
| 16 | Refilling of following capacityCO2 type fire extinguishers with fresh /sufficient quantity / quality of CO2 with proper weight and measure, labeling with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities. Re-fixing the same in proper position and location as per the requirement of the location and type of fire extinguisher . |
| 17 | 4.5 KG CO2 type Portable Fire Extinguisher |
| 18 | 3.0 KG CO2 type Portable Fire Extinguisher |
| 19 | 2.0 KG CO2 type Portable Fire Extinguisher |
| 20 | Hydraulic Pressure Testing of 4.5 capacity CO2 type Fire Extinguishers as per IS: 5844 -1970 (Reaffirmed 2006) and submission of Test certificates etc. as required. |
| 21 | Refilling ofDry chemical powder type 4/5 Kg capacity fire extinguisher (Powder + new CO2 gas cartridge/ gas as per BIS standard). |
| 22 | Providing and fixing of Gas Discharge Hose & Horn for following capacity Co2 type Fire Extinguishers. |
| 23 | For 4.5 KG CO2 type Portable Fire Extinguisher |
| 24 | 3.0/2.0 KG CO2 type Portable Fire Extinguisher |
| 25 | Providing and fixing Gun metal regulating valve with safety washers for 4.5 Kgcapacity Carbon Dioxide type Fire Extinguishers as per BIS specifications. {(IS: 3224:2002 (Reaffirmed 2007)} (The dismantled scrap material may be retained by the agency) |
| 26 | Providing and fixing Hose pipe/Nozzle for Dry Chemical Powder Type Fire Extinguisher of 5 Kg. Capacity |
| 27 | Providing and fixingMS clamp for fixing CO2 4.5 Kg capacity / DCP 5 Kg capacityfire extinguishers on wall etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
