|
| 1 | DEMOLITION & DISMANTLING |
| 2 | Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed. |
| 3 | Demolition Cement Concrete (Un-reinforced) in any Position not otherwise specifically Provided for and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed. |
| 4 | Demolition Cement Concrete (Reinforced) in any Position not otherwise specifically Provided for and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed. |
| 5 | Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Natural Ground including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed.NOTE : Excavating in Post Hole will be Measured and Paid for separately under appropriate Items. |
| 6 | Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. |
| 7 | Taking down Chowkat or Frame (without Taking Off Shutter from the Frame) of any description, not exc. 1.50 Square Metre Each, complete all as specified and as directed. |
| 8 | Taking down Chowkat or Frame (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre not exc 4.00 Square Metre Each, complete all as specified and as directed. |
| 9 | Taking down/out Unserviceable Rusted/ Worn out Wire Cloth/Netting of any descrip-tion, fixed with Beads, etc., complete all as specified and as directed. |
| 10 | Hacking out Broken Glass of any description from Wooden or Metal Frames, or Stone, Concrete or Brick surrounds of any thickness or Size; Hacking out Old Putty or Removing Beads, etc., complete all as specified and as directed. |
| 11 | Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed. |
| 12 | Dismantling Fencing Wire Mesh of any description including Serviceable Chain Link Fencing keep in Safe custody for reuse at Site, complete all as specified and as directed. |
| 13 | Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed. |
| 14 | Dismantling Ceiling Frame (Snap Grid) with Hangers of any descriptions but except Wall and Ceiling Boards, complete all as specified and as directed. |
| 15 | Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Segregating the Serviceable Plain or Corrugated Steel Sheeting and Stacking properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed. |
| 16 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed. |
| 17 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, complete all as specified and as directed. |
| 18 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, complete all as specified and as directed. |
| 19 | Dismantling and breaking up drain Pipes 150mm bore (Internal dia), jointed in Cement Mortar and Taking out of Trenches, if required, complete all as specified and as directed. |
| 20 | SUB TOTAL OF SCHEDULE \"A\" Part - I |
| 21 | SCHEDULE \"A\" PART - II [BUILDING REPAIRS/ MAINT WORKS] |
| 22 | Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/ Loose Soil, complete all as specified and as directed. |
| 23 | Returning, Filling in approved Soft/Loose Soil including spreading leveling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed. |
| 24 | Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed. |
| 25 | Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. |
| 26 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 35mm thick, Open Rebated and Prepared to receive Glass, Gauze, etc., Divided into Squares, with Plain, Chamfered or Rounded, Mitred and Rebated Sash Bars any Numbers,with Edges of Sash Bars and Framing Moulded fitted with cut and mitred Beads for securing Glass, Gauze, etc.; Sizes of Members of Shutters as specified in SSR Part-I, Section 8 Clause 8.4(b) and fitted to Chowkat, complete all as specified and as directed. |
| 27 | S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick Plain colour PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 28 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain Color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/ sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement and fixing in the Frame with Butt Hinges as per Site as per Specifica-tion and Drawing of MES Schedule, complete all as specified and as directed.NOTE : Builders Hardware will be Measured & Paid seperately under appropriate Items. |
| 29 | S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section, complete all as specified and as directed. |
| 30 | S&F Aluminium alloy anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section, complete all as specified and as directed. |
| 31 | S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed. |
| 32 | S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed. |
| 33 | S&F Aluminium anodised Handle of Size 150mm, Cast type, complete all as specified and as directed. |
| 34 | S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and Fixed-in-repair, complete all as specified and as directed. |
| 35 | S&F Floor Door Stopper with Overall length of Cover Plate 75mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor and Fixed-in-repair, complete all as specified and as directed. |
| 36 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. |
| 37 | S&F Sheet Glass3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 38 | S&F 3.0mm thick, Figured glass, pun head type and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 39 | M&L Framed Work in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and Hanging; also Fastening and fixing, conforming to Fe-290, Gde E-165, complete all as specified and as directed. |
| 40 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 41 | Re-fixing only Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet (Serviceable Galvalume Corrugated Steel Sheet obtained from Item No. 1.14 here-in-before) in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 42 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 43 | M&L Aluminum Anodised Snap Grid/ Frame Work of Size 605x605mm in Ceiling, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed. |
| 44 | S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed. |
| 45 | S&F HSPC Non-Asbestos Fibre Cement Building Boards 595x595x4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed. |
| 46 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 47 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 48 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 50mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 49 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 50 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 150mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 51 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 52 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 53 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 54 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 55 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality and/ or as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 56 | M&L Glazed Ceramic White Tiles 300x450x7.0mm thick (1st quality as approved) conforming to IS:13753 in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 57 | M&L Machine Made & Pressed Pre-cast Concrete Coloured Interlocking Polished Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked in Floors, laid dry over Clean dry Sand and grouted with Clean dry Sand, complete all as specified and as directed.NOTE : Clean dry Sand will be Measured & Paid separately under appropriate Item. |
| 58 | M&L Sand Filling under Pre-cast Concrete Paver Block including Watering (if required/ ordered) and Consolidation, complete all as specified and as directed. |
| 59 | M&L Chequered Cement Concrete Coloured (Terracota Red or Yellow) Tiles 200x200x25mm thick, Set and Jointed in Neat Cement Slurry in Floors and Pointed in Grey Cement, laid over and including 15mm thick Cement Screed Bed in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed will deemed to be included in Quoted Rate. |
| 60 | M&L Preparing New Wooden Surfaces of any description, Over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed. |
| 61 | M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 62 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 63 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 64 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. |
| 65 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 66 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.MAKE : JAQUAR CON-.83KN or equivalent Model in Make : GEM/ MARC (as approved by GE) |
| 67 | S&F Angle Cock 15mm bore (dia), Cast Copper alloy, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed. |
| 68 | M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, SWG ‘P’ or ‘S’ Trap, Providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding Provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 69 | S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) ‘P’ or ‘S’ Trap, Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 70 | S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device and Fixed-in-repair, complete all as specified and as directed. |
| 71 | S&F PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting, Pinning in Ends and Making Good to Distrubed Surfaces and Fixed-in-repairs, complete all as specified and as directed. |
| 72 | S&F Hand Shower (Health Faucet) with Wall Hook, Brass Chromium Plated having 1.20 Metre long with PVC Hose Pipe and Fixed-in-repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-593 or equivalent Model in Make : GEM/ MARC (as approved by GE) |
| 73 | S&F Vitreous China White Wash Hand Basin of Size 550x400mm, Flat Back including Brass Chromium plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, Chain, Plug & Porocelain Stopper and Fixed-in-repair, complete all as specified and as directed. |
| 74 | S&F Brass Chromium Plated Waste Fitting 32mm bore (dia) for glazed ware sinks, basins, etc. with long screwed shanksand fly-nuts, flange end bedded in red lead cement and other end fixed and Fixed-in-repairs, complete all as specified and as directed. |
| 75 | S&F PVC Waste Pipe 32mm bore (dia) of length not less than 900mm (as approved), suitable for Wash Hand Basin, Urinal, Sinks, etc. and Fixed-in-repair, complete all as specified and as directed. |
| 76 | S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed. |
| 77 | S&F PTMT Grating Doom 100mm dia (Minimum Weight 25 Gram) (as approved) and Fixed-in-repairs, complete all as specified and as directed. |
| 78 | SUB TOTAL OF SCHEDULE \"A\" Part - II |
| 79 | SCHEDULE \"A\" PART - III [REPAIRS TO DRAINS, CULVERT, FENCING, PATH] |
| 80 | M&L Cement Concrete 1:3:6 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. for embedding /fixing Fencing Posts or Struts including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 81 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 82 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Fencing Posts, Struts, etc., average Sectional Area exc. 100 Sq Cm and N. Exc 250Sq Cm, with or without Cham-fered Angles and flat, splayed, rounded or mitred Tops and fixed, etc., complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items. |
| 83 | M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; n. exc. 200mm thick (Horizontal or Sloping, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed. |
| 84 | M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exceeding 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed. |
| 85 | M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 86 | M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 87 | M&L Mild Steel Tubular section, Square or rectangular in shape, using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, as Posts and Struts in Fencing including Special Shaped Washers, etc. completeincluding cutting Tops to shape as directed, drilling holes including all necessary drilling, bolting or riveting, etc. and Similar Work, complete all as specified and as directed. |
| 88 | M&L Mild Steel Works such as Posts and Struts in Fencing including cutting Tops to shape as directed, drilling holes, notching for Wire, etc.; including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 89 | M&L Mild Steel Flat Iron 40x6.0mm (Fillet for securing Wire Mesh, etc.) cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 90 | M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 91 | M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of Neck and Length of Bolt exc. 10 Cm not exc. 15Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed. |
| 92 | S&F Fiber Glass Reinforced translucent plain sheet, 2mm thick, fixing with coach screw and washer in fencing including taking down old damaged sheet, complete all as specified and as directed. |
| 93 | Supply only Chain Link Fencing 100mmx100mm or 75mmx75mm mesh with 3.15mm / 4.0mm dia Mild Steel Galvanised Wire (as ordered), complete all as specified and as directed. |
| 94 | Fixing only New Chain Link Fencing including Line Wires, any mesh, Size and type to any type of Standards, Rails, Straining Bolts, etc. including Provission of Mild Steel Binding Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 95 | S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc. and Fixed-in-repairs, complete all as specified and as directed.NOTE : Each Line of Barbed Wire will be Measured for Payment. |
| 96 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate)in bed to drain pipe 150mm bore including packing under and haunching against the side of pipes complete all as specified and as directed.NOTE : Thickness of bed below te pipe shall be 10cm thick and width shall be by adding 30 cm to the external diameter of the pipe |
| 97 | S&F PVC (SWR) 150mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid in trenches, etc., complete all as specified and as directed. |
| 98 | SUB TOTAL OF SCHEDULE \"A\" Part - III |
| 99 | SCHEDULE \"A\" PART - IV [CLEANING TO SEWAGE SYSTEMS] |
| 100 | M&L Removing and/or Cleaning Blockage of Floor Trap, Nahani Trap, etc. by any means of Flushing with Water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 101 | M&L Removing/Cleaning Blockage of Sewer Line 100/110mm bore (dia), manually by rodding from Manholes, Septic Tank, etc. and cleaning of Sewer Line by flushing with water, complete all as specified and as directed.NOTE : The Item is Measurable/Operative upto THRICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department. |
| 102 | M&L Cleaning MANHOLE, Depth exc. 0.50 METRE and not exc. 1.00 METRE, by opening Cover and Taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 103 | M&L Cleaning MANHOLE, Depth exc. 1.00 METRE and not exc. 1.50 METRE, by opening Cover and Taking out accumulated Brick Bats, Garbage, Silts or any other Items, re-fixing the Cover after cleaning of Manhole, removing and carrying Brick Bats Garbage, Silts, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required/ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative upto TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 104 | M&L Cleaning SEPTIC TANK 25 USERS by opening Cover, Pumping out Sewage Water and taking out accumulated Night Soils, Sludges, Brick Bats or any other Items, re-fixing the Cover after cleaning of Septic Tank, removing and carrying Night Soils, Sludges, Brick Bats, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 105 | M&L Cleaning SEPTIC TANK 50 USERS by opening Cover, Pumping out Sewage Water and taking out accumulated Night Soils, Sludges, Brick Bats or any other Items, re-fixing the Cover after cleaning of Septic Tank, removing and carrying Night Soils, Sludges, Brick Bats, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only ONCE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 106 | M&L Cleaning SEPTIC TANK 100 USERS by opening Cover, Pumping out Sewage Water and taking out accumulated Night Soils, Sludges, Brick Bats or any other Items, re-fixing the Cover after cleaning of Septic Tank, removing and carrying Night Soils, Sludges, Brick Bats, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only TWICE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 107 | M&L Cleaning SEPTIC TANK 200 USERS by opening Cover, Pumping out Sewage Water and taking out accumulated Night Soils, Sludges, Brick Bats or any other Items, re-fixing the Cover after cleaning of Septic Tank, removing and carrying Night Soils, Sludges, Brick Bats, etc. to a distance exc. 50 Metre but not exc. 100 Metre and burried (minimum 450mm below Normal Ground Level), Sprinkling Bleaching Powder @ 0.50 Kg/Sqm on deposited Sludges at Earth Pit including Excavating of Earth Pits and Returning, Filling in, Dressing of surplus Soils and providing ground to Slope, etc., (as required /ordered at Site), complete all as specified and as directed.NOTE :-(a) The Item is Measurable/Operative only ONCE during the entire Contract Period.Any additional Cleaning if rquired, Contractor will Cleaning the same without any Extra Cost to the Department.(b) The Cost of Bleaching Powder, necessary Earth Works, Materials, T&P, etc. required for Cleaning will deem to be included in the Quoted Unit Rate. |
| 108 | SUB TOTAL OF SCHEDULE \"A\" Part - IV |
| 109 | Total Amount in Figures |
| 110 | Quoted Amount in Words |
