|
| 1 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scaffolding upto 4th mtr. complete all as specified and as directed. |
| 2 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and even, complete all as specified and as directed. |
| 3 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 4 | M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 5 | Dismantling/removing old damaged worn out APP of any thicknessincl screed bed or plastering of anythickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and as directed. |
| 6 | M&L for 15 mm thickscreed bedin CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cementon concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately. |
| 7 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 8 | M&L for, water proofing treatment of roof consisting as under:- (a) Applyinga tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and as directed. |
| 9 | All as per Srl item No.8 above but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and as directed. |
| 10 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each compete all as specified and as directed. |
| 11 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 12 | S&F factory made uPVC texturecolour (wood finish) casement (openable)window with pleated mesh area made of extrudedprofiles with wall thickness of 2.0mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm),sash (60mmx73mm),T profile (One vertical length in between two shutters) (60mmx74mm) Glazing bead(35x20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + -0.2 mm thick galvanized steel frame (28mmx21.5mm) sash (31mmx27.5mm)\"T\" profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware : [ casementhandle made of zinc alloyed (while powder coated) Butt hinges of zinc alloyed (white powder coated) transmission gear made of mild steel with multi point locking system)and 5mm thick glazing with selected quality glass complete all as specified and as directed. Note : Selected quality clear Glassandmeshcost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 13 | S&F factory made uPVC texture colour (wood finish) casement (Open-able) door with pleated mesh made of extruded profile with wall thickness of 2.0mm (+/- 0.2mm). door profile with hollow section with multi chamber, frame (60mmx58mm) T profile (One vertical length in between two shutters) (60mmx71mm) Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanized steel frame (28mmx21.5mm) \"T\" profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [ three track window/ door handle made of zinc alloyed (while powder coated) Corner strikers: cylinder, Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder coated)] and 5mm thick glazing with selected quality glass. Note : Selected quality clear Glassandmeshcost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 14 | M&L for POP false ceiling including anchor angle ceiling angle perimeter angle and intermediate angle with wire mesh and all as specified and as directed. Note Design will decided be GE. |
| 15 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed. |
| 16 | M&L for Brick work with sub class \"B\" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and as directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 18 | M&L for double charged vitrified tiles 9 to 10mm thick (square/rectangular)in any pattern area of each tiles not exceeding 0.36 sqm, in floors/skirtingetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specifiedand as directed. |
| 19 | M&L for, Non-skid ceramic coloured tiles, joint free tiles 7 to 8 mm thick (square/rectangular)of size 300 x 300 mm , in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 20 | M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. Note :- Pattern of the tiles will be decided by GE at the time of execution. |
| 21 | S&F Rotational moulded polyethylene water storage tank 1000 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms, including all fittings and 20mm size gate valves with iron wheel head including taking down existing tank complete all as specified and as directed. |
| 22 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single sideprelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single sideprelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying andfixing in the frame at site as per specification complete all as specified and as directed. |
| 23 | S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified and as directed. |
| 24 | Dismantling of wall & ceiling boards of any description/thickness fixed with nails/screws in any position complete all as specified and as directed. |
| 25 | S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and as directed. |
| 26 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed. |
| 27 | M&L for Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 meter in depth for shitting sewage lines including trimming of sides etc, complete all as specified and as directed. |
| 28 | M&L for Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation of manholes and filling, mass concrete around the manholes complete all as specified and as directed. |
| 29 | M&L for Plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching againjst the sides of pipes after they are laid and tested for 150mm bore SGSW pipe, complete all as specified and as directed. |
| 30 | M&L for Salt glazed stone were (SGSW) Grade \"A\" pipes 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and as directed. (Excavation, earth work and concrete bed shall be measured and concrete bed shall be measured and paid for separately). |
| 31 | M&L for Plain cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:6 as in cill, lintels upto 1.5metrespan,copings etc. and in similar works including weathering, slightlyrounded or chamfered angles and throating and necessary form work complete all as specified and as directed. |
| 32 | S&F TMTreinforcement bars 10mm dia and over including all cutting bending binding cranking placing & binding with MS wire (ann ealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 33 | M&L for providing precast reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate set in cement mortar 1:6 in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and as directed. |
| 34 | M&L for Plain cement concrete ( 1:2:4), type B-2, (using 20 mm graded stone aggregate) as in surface channels and drains, benching of manholes laid to shapeincluding necessary form works, complete all as specified and as directed. |
| 35 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth in soils, complete all as specified and as directed. |
| 36 | Removal excavated material to distance not exceeding 100 metre and depositing where directed at level not exceeding 1.5 metre above the starting point in soil, complete all as specified and as directed. |
| 37 | S&F CP brass Health faucet with 15mm bore pipe complete all as specified and as directed. |
| 38 | S&F Acrylic shelf 46X13cm make ESS ESS model (TM 07) chrome or equivalent complete all as specified and as directed. |
| 39 | S&F corner shelf with CP railing 300mmx 300mm complete all as specified and as directed. |
| 40 | S&F drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws andPVC rawal plugs as required complete all as specified and as directed. |
| 41 | M&L for complete removal of existing treatment by scraping down completely on brick wall/concrete surfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Charge and includingopening ofexisting cracks , filling up of \"V\" cracks with epoxy expandable putty to required depth, making good weak plastereded/ unplastered surfaces with cement plaster in CM 1:4 inclnecessary filling and applyingof Birla whiteputty on entire surfacesto obtain/achieve smooth even surfaces with using sand paper and applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instrctionscomplete all as specified and as directed. |
| 42 | M&L for preparation of newly plastered surface on brick wall/concrete surfaces thoroughly,and applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instrctionscomplete all as specified and as directed. |
| 43 | M&L for complete removal of existing treatment on walls by scraping down washing rubbing down with water and cleaning the surface up to the entire satisfaction of Engineer-in-Charge andmaking good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of oil emulsion over chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed. |
| 44 | M&L for preparation of newly plastered surface on brick wall/concrete surfaces thoroughly, applying two coat of oil emulsion over chalk whiting on plastered surfaces preparatory to distemperingcomplete all as specified or as directed. |
| 45 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash . complete all as specified and as directed. |
| 46 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 47 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 48 | S&FPVC (SWR) multi floor trap with dia of outlet 75mm, with CP gratingwith hinge in kitchen and bath etcsituation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and as directed. |
| 49 | M&L for, 100mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, laid in trenches or on walls including complete all as specified and as directed. |
| 50 | M&L for, 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, laid in trenches or or walls, complete all as specified and as directed. |
| 51 | S & F 100mm bore PVC (SWR) bends, diminishing pieces or tapers complete all as specified and as directed. |
| 52 | S & F 75mm bore PVC (SWR) bends, diminishing pieces or tapers complete all as specified and as directed. |
| 53 | S&Fstainless steel 150mm x 150mm x 100mm floor trap grating ( anti cokcroach)jointing with solvent complete all as specified and as directed. |
| 54 | S&F20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 55 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 56 | S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum for Shelf / Partitions / Drawer complete all as specified and as directed. |
| 57 | S&F 1mm thick Matt finish acrylic Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instruction complete all as specified and as directed |
| 58 | M&Lfor 16 to 18 mm th Granite (Z black) workforWHB counter and likeincl cutting for WHB and for waste couplingetcincluding mouldingcomplete all as specified and as directed. |
| 59 | S&F 100 mm size Stainless Steelhandle, complete all as specified and as directed. |
| 60 | S&F stainless steel 110 degree hinges for cupboard complete all as specified and as directed. |
| 61 | M &L forABS body magnetic latches of size 50mm complete all as specified and as directed. |
| 62 | S&Fvitreous china colouredOne piece EWCs with integrated cistern, seat cover and twin flush fittings and including P or S trapetc. complete all as specified and as directed. ( Cat part CARVEL of Cera or Equivalent out of makes specified in list of makes.) |
| 63 | S&Fvitreous china colouredurinal with backside inlet for water including Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated)complete all as specified and as directed.( Cat part URS-WHT-13253Oand SNR-STL-51087 of Jaquar or Equivalent out of makes specified in list of makes). |
| 64 | S&Fcounter top oval shape ivory/white coloured wash hand basin of size 56 x 41cmcomplete all as specified and as directed. make- CNS-WHT-903 of Jaquar or Equivalent out of makes specified in list of makes). |
| 65 | S&F 32mm dia medium grade galvanising steel water tubing isi marked with all fittings and fixed to walls and ceiling or laid in floorscomplete all as specified and as directed. |
| 66 | S&FCP paper holderof Make-AHS-1553 of Jaquar or equivalent. complete all as specified and as directed. |
| 67 | S&F15 mm angle valve chromium platedand fancy typewith crutch or butter fly handle high pressure screwed down of Make- ORM-10053 of Jaquar or Equivalent out of makes specified in list of makes complete all as specified and as directed. |
| 68 | S&FCP waste coupling 32mm size half threaded with 130mm height completed as of Make-ALD-709 of Jaquar or equivalent out of makes specified in list of makes complete all as specified and as directed. |
| 69 | S&FCP bottle trap with internal partition32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete as perMake-ALD-769 L of Jaquar or equivalent out of makes specified in list of makes complete all as specified and as directed. |
| 70 | S&F 15 mm bore bib taps chromium platedand fancy typewith crutch or butter fly handle high pressure screwed down of Make- ORM-10037of Jaquar or Equivalent out of makes specified in list of makes complete all as specified and as directed. |
| 71 | S&FCPsingle lever basin mixer with popup waste system and 450 mm long braided hoses chromium platedof Make- ORM-10051 B of Jaquar or Equivalent out of makes specified in list of makes complete all as specified and as directed. |
| 72 | S&Ffancy type frame less designer looking mirror of selected quality glass (Approx size 900 x450x 8mm ) and fixedwith 4 nos SS studs of suitable size complete all as specified and as directed. |
| 73 | S&F 8mm thick Rectangular shaped 900mmx 450mm urinal partition with frosted glass fixed with stainless steel bracket as recommended by manufacture complete all as specied and as directed. |
| 74 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 75 | M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 76 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 77 | M&L for PCC (1:3:6) Type C-2 50 mm thick using 40 graded stone aggregate as in subbase of floor complete all as specified and as directed. |
| 78 | M&L for machine pressed precast concrete interlocking paver block coloured and polished of any shape and size confirmeing to IS-15658-2006 of 60 mm thick, M-35 gradeover 50 mm thick sand cushioning, etc complete all as specified and as directed. |
| 79 | M&L for sand for sand cusion for interlocking tiles including spreading and levelling complete all as specified and as directed. |
| 80 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and as directed. |
| 81 | M&L for concealed point wiring for the following the PVC insulated and sheathed cable 1.5 sq mm (nominal area) multistranded copper conductor 1100 v FRLS grade single core including PVC conduit medium grade of appropriate size (not less than 20 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated sheathed multistranded copper conductor to common earth and connected to earth dolly for following :- (Note) : 1.The cuttingchases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost.2. Rate quoted by the contractor deemed to be included metal flush box (not less than 2.5 mm thick) of suitable size as required at site and white cover plate with frame suitable for mounting of switch and socket etc . |
| 82 | One light point control by one switch . |
| 83 | One ceiling fan/exhaust fan control by one switch . |
| 84 | One 3 pin socket outlet, 5 Amps independent . |
| 85 | One 3 pin 5 amps socket outlet on the same board with other switches . |
| 86 | One bell/buzzer point contolled by one push button independent. |
| 87 | All as per item No. 81 above but wire 2.5 sq mm cable for switch socket outlet 3 pin 15 Amps with 1.5sq mm as earth continuity conductor. (FOR 15 Amps socket point) |
| 88 | All as per item No. 81 above but wire 4.0sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (FOR geyser/AC point) |
| 89 | S&F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed. |
| 90 | S&F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed. |
| 91 | S&F in replacement switch 6 amps modular type one one way complete all as directed. |
| 92 | S&F in replacement switch 16 amps modular type one one way complete all as directed. |
| 93 | S&F ceiling rose three terminal complete all as specified and as directed. |
| 94 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 95 | S&F in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 96 | S&F in repair 12 watts, 6500 K,emergency bulb with high quality BIS approved Li-ion battery with 2600AH capacity, the bulb shall work as regular lamp with AC supply and emergency lamp with DC supply, the power backup in emergency mode is upto 4 hours and charging time shall be 8 hours, the deiver designed with wide voltage range of 150-300V AC complete all as specified and directed.Cat No. NE1201 of Make : Wipro or its equivalent out of makes specified in list of makes. |
| 97 | S&F LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 98 | Taking down carefully exsiting ceiling fan of any size, sealing cable end, dismantling blades and removing fan and blades and kept aside for reuse complete all as specified and as directed. |
| 99 | S&F stepped type electronic fan regulator flush type complete all as specified and as directed. |
| 100 | M& L for making hole to the existing wall surface of any type/girth and at any height for fixing of exhaust fan 200 mm sweep and make good to match with the existing surfaces complete all as specified and as directed. |
| 101 | S&Fin repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. |
| 102 | S & F in repair MCB DB double doorSPN 12 Way with 200 Amps rated copper bus bar complete all as specified and as directed. |
| 103 | S & F MCB SP 6-32 Amps, 10 KA, \"C\" Series complete all as specified and as directed. |
| 104 | S & F MCB SPN 40 Amps, 10 KA, \"C\" Series complete all as specified and as directed. |
| 105 | M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm diaby means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. |
| 106 | S&F Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc.as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed. |
| 107 | S & F in repair sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable,1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and as directed by Engr-in-Charge. (FOR SPN DB\"s ) |
| 108 | All as per item No. 102 above but of size 1.5 sq mm 2 core alongwith earth wire of 1.5 sq mm complete all as specified and as directed. |
| 109 | All as per item No. 102 above but of size 4.0 sq mm 2 core alongwith earth wire of 4.0 sq mm complete all as specified and as directed. |
| 110 | All as per item No. 102 above but of size 4 x 10 sq mm + 2 x 6.0 sq mm as earth wire complete all as specified and as directed. |
| 111 | S&F call bell multi music type, AC 230 Volts, single pole complete all as specified and as directed. |
| 112 | S&F bell push flush type 5 Amps complete all as specified and as directed. |
| 113 | S&F in repair LED bldg security light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mouting of security light to be bend as required shape, pipe bracket shall be made as per direction and site requirement and suitable size 02 Nos MS clamps and nuts and bolts complete all as specified and as directed. |
| 114 | S&F heavy duty single phase, steel body exhaust fan 300 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved complete all as specified and as directed. |
| 115 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep.Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 116 | S&F water heater storage type, electric, capacity 25 Ltrs. BEE 5 star rated complete all as specified and as directed. |
| 117 | S&F Air ciculator fans 230 Volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and as directed. |
| 118 | S&F TPN DB\"s 4 way vertical type 415 V, double door suitable for housing of 100 Amps MCCB as main incoming complete all as specified and as directed. |
| 119 | S&F MCCB 63 Amps, 3 Pole, 16 KA, fixed type, suitable to be fixed in 4way TPN DB complete all as specified and as directed. |
| 120 | S&F LED luminaire 600 mm x 600 mm 35/36 watts, 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases for suitable size complete all as specified and as directed. |
