Ladakh Autonomous Hill Development Council-LAHDC has published Tender For Construction Of Parking At Thang Village Nubra. Submission Date for this Tender is 02-03-2024. Shed Construction Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | PARKING:- Earth work in bulk excavation by mechanical means ( hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kind of soil |
2 | ordinary rock |
3 | Soling stone in horizontal including cost of stone |
4 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed) |
5 | Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix |
6 | Dry Random rubble masonry with hard stone from qurry in foundation and plinth level with bond stone. |
7 | Providing and laying DPC50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates)50 mm nominal size crushed. |
8 | Providing and laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level. 1:3:6 (1 Cement: 3 coarse sand: 6graded stone aggregate) 20 mm nominal size) |
9 | Providing and laying of interlocking tiles 80 mm thick precast cement concrete in 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate ) with 4"thick sand including carriage of tile , sand etc. complete job. |
10 | filling available eacavated earth (excluding rock )in trenchs , plinth , foundation etc in layer not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering, lead upto 50mtr and lift upto 1.5 mtr. |
11 | Flush system P.C:- Earthwork in excavation by mechanical means ( hydraulic excavator ) in trenches for foundations , drains, pipes, cables, etc. ( not exceeding 1.5 m in width ) and for shafts, wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and ramming of bottoms lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil. |
12 | soiling stone in horizontal including cost of stone. |
13 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed) |
14 | Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix |
15 | Providing and fixing up to floor five level precast cement Concrete solid block including hoisting and setting in position with cement mortar 1:3 (1cement:3 coarse sand), with 6 mm thick cement plaster 1:3( 1 Cement: 3 fine sand) on exposed surface complete 1:3:6(1 cement :3 coarse sand : 6 graded stone) |
16 | Reinforcedcementconcreteworkinwalls(anythickness)includingattachedpilasters, buttresses,plinthandstringcourses,fillets,columns,pillars,piers,abutments,postsand struts uptofloorfivelevelincludingcuringbutexcludingcostofcenteringshuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
17 | Centering and shuttering, Including strutting, propping etc and removal of form for Foundition footing . |
18 | Lintel beam, plinth beam, girders etc. |
19 | Suspended floor, landing, rooofing etc |
20 | Edge of slab |
21 | Reinforcement for RCC work including, straightening, cutting, bending, placing in position and binding all complete |
22 | Providing wood work in frame of ,window, celerestory window and other frame , wrought framed and fixed in position.2nd class kail wood. |
23 | Providing and fixing ISI marked flush door shutter for conforming to IS2202 part Ist new decorative two core of block construction with frame of Ist class hard wood and well match ply venerring ms butt hings with necessary screws with 30mm thick. |
24 | Providing and fixingpanellingglazed shutters for doors window and celerestory window using 10kg (4mm thick) float glass panes 2nd class kail wood 30mm thick. |
25 | P/F aluminium slidingbolts isi marked anodised (anodic coating not less then grade Ac 10 as per Is: 1868 with necessaryscrews etc complete.250X 16mm DOOR |
26 | P/F aluminiumtowerbolts isi marked anodised (anodic coating not less then grade Ac 10 as per Is: 1868 with necessaryscrews etc complete.A) Door = 250x10mmDoor |
27 | B) VENTILATOR100MM V = |
28 | P/F alumimium handle ISI marked AC 10 as per 1868 with necessary screw etc complete A) Door = 125MM |
29 | B) VENTILATOR100MM V = |
30 | 50mm thick cement concrete flooring in 1:2:4 ( 1 cement :2 coarse sand :4 graded stone agg )finished with a floating coat of neat cement including cement slurry with 20mm nominal size agg. |
31 | 15 mm thick cement plaster on rough side of single or halfbrick wall of mix 1:4( 1cement: 4 coarse sand) |
32 | 6 mm thick cement plaster to ceiling of mix 1:3 (1 Cement :3 coarse sand) ) |
33 | Applying one coat of cement primer of approved brand and manufacture on wallsurface water thinable cement primer |
34 | Distempering withoil bound washable distemper of approved brand and manufacture of required shade and colour complete .New work two or more coat |
35 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. |
36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coat on new work. |
37 | Providing and fixing of 60mm thick precast cement concrete interlocking tiles laid over 75mm thick fine sand bed, levelling, watering, ramming and filling joints sand all complete. |
38 | Providing and laying of 50mm thick DPC in 1:2:4 ( 1cement :2 coarse sand : 4 coarse aggregate) 20 mm nominal size |
39 | Providing and laying floor tiles 300x300 mm thickness to be specified by the manufacture of 1st quality conforming to IS 13755 of NITCO, ORIENT, SOMANY KAJARIA or equivalent makes in colour such as white ivory, grey laid in 20 mm thick cement mortar 1:4 mix (1 Cement: 4 coarse sand) including painting with joints with white cement and matching pigment etc complete. |
40 | Providing and fixingceramic glazed tilesconforming to IS 3753 of minimum thickness 5mm of approved makes like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades, except beyond bottle green, black of any size as approved by engineer incharge in skirting risers of steps and dedos over 12mm thick bed of cement mortar1:3 and paint with grey cement slurry @ 3.3 kg.m2 |
41 | PLUMBING:- Providing and fixing white vitrous china pedestal type wates closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231 , with all fittings and fixtures , complete including cutting and making good the walls and floors wherever required .W.C pan with ISI marked while solid plastic seat and lid |
42 | Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100mm sand cast iron P or S strap , 10 litre low level P.V.C flushing cistern including flush pipe ( of approved make ) mannually controlled device ( handle lever ) conforming to IS : 7231, with all fitting and fixtures complete , including cutting and making good the walls and floors wherever required orissa pattern white vitrous china W.C pan of size 580*440mm with integral type pot rests |
43 | Providing and fixing wash basin with C.1/M.S brackets , 15mm C.P brass pillars tops, 32mm C.P brass waste of standard pattern , including painting of fitting and brackets , cutting and making good the walls wherever required. White vitreous China wash basin size 550 X 400mm with single 15mm C.P brass pillar taps. |
44 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. 32mm dia |
45 | Providing and fixing mirrorof supervisor glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Circular shape 450 mm dia |
46 | Providing and fixing toilet paper holder C.P brass |
47 | Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and color waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms |
48 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting assangement of approved quality and color:450mm long towel rail with total length of 495mm, 78,, wide and effective height of 88mm, weighing not less than 170 gms. |
49 | Providing and fixing ball value ( brass) of approved quality completea) 25 mm nominal bore |
50 | b) 40 mm nominal bore |
51 | Providing and fixing brass bib cock of approved quality ( 15 mm nominal bore ) |
52 | Providing and fixing 3 layer PP-R( Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings I/C fixing the pipe with clamps at 1m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge ( concealed work including cutting chases and making good the walls etc.)a) Pn-16 pipe, 25 mm OD |
53 | b) Pn-16 pipe, 40mm 0D |
54 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings I/C fixing the pipe with clamps at 1m spacing. This includes jointing of pipes and fittings with one step (PVC solvent cement and testing of joints complete as per disection of engineers incharge. ( Internal work exposed on walls) a) 100mm dia |
55 | b) 75 mm dia |
56 | Proving and placing on terrace ( at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license) |
57 | Providing and fixing (40mm x 25mm) reducer socket |
58 | Providing and fixing 40mm dia PPR elbow |
59 | Providing and fixing 40mm tee PPR |
60 | Providing and fixing ball valve P |
61 | Providing and fixing 20x40mm tee |
62 | Providig and fixing 40 mm thick nipple |
63 | (DRY SYSTEM PUBLIC CONVENIENCE) Earthwork in excavation by mechanical means ( hydraulic excavator ) in trenches for foundations , drains, pipes, cables, etc. ( not exceeding 1.5 m in width ) and for shafts, wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and ramming of bottoms lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil. |
64 | soiling stone in horizontal including cost of stone. |
65 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed)+B5:B15 |
66 | Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix |
67 | Providing and fixing up to floor five level precast cement Concrete solid block including hoisting and setting in position with cement mortar 1:3 (1cement:3 coarse sand), with 6 mm thick cement plaster 1:3( 1 Cement: 3 fine sand) on exposed surface complete 1:3:6(1 cement :3 coarse sand : 6 graded stone) |
68 | P/L in position specific grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level (1:1.5:3) stone agg. 20mm n/size. |
69 | Reinforcement for RCC work including, straightening, cutting, bending, placing in position and binding all complete |
70 | Centering and shuttering, Including strutting, propping etc and removal of form for1)Lintel beam, plinth beam, girders etc. |
71 | 2)slab for G.Floor |
72 | 2)edge of slab.Ground floorL/W |
73 | Providing wood work in frame of ,window, celerestory window and other frame , wrought framed and fixed in position.2nd class kail wood. |
74 | 15 mm thick cement plaster on rough side of single or halfbrick wall of mix 1:4( 1cement: 4 coarse sand) |
75 | 6 mm thick cement plaster to ceiling of mix 1:3 (1 Cement :3 coarse sand) ) |
76 | Applying one coat of cement primer of approved brand and manufacture on wallsurface water thinable cement primer |
77 | Distempering withoil bound washable distemper of approved brand and manufacture of required shade and colour complete .New work two or more coat |
78 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. |
79 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coat on new work. |
80 | Providing corrugated G.S sheet roofing vertical /curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, reftered and trusses and including cutting to size and shape wherever required. |
81 | Painting with synthetic enamel paint of approved brand and manufactre of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
82 | Providing and fixing flushed door shutters conforming todecorative type , core of block board construction with frame of ist class hard wood and well matched commercial ply venering with vertical grains or cross bands and face veneers on both faces of shuttersa) 35 mm thick including ISI marked M.S pressed bright finished butt hinges with necessary screws of required size |
83 | Providing and fixing glazed shutters for doors , windows and celestory windows using 10 kg / sqm (4mm thick) float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws.Second class kail wood . NOTE: ALL THE ITEMS IN THE BOQ ARE INCLUSIVE OF CARRIAGE CHARGES |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail