|
| 1 | Item No.1:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 2 | Item No.2 : Dismantling flat wooden or A.C.Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete. |
| 3 | Item No.3: Removing cement tiles or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads and lifts.etc. complete. |
| 4 | Item No.4: RemovingDoors and windows with frames and stacking the materials as directed with all leads and lifts.etc. complete. |
| 5 | Item No.5: Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank) |
| 6 | Item No.6: Providing and laying Cast in situ/ Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) |
| 7 | Item No.7: Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris up to a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. |
| 8 | Item No.8: Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 9 | Item No.9: Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to15 mm thick in C.M.1:4 and rough cast treatment 12mm thick in proportion 1:11/2:3 including scaffolding and fourteen days curing complete. |
| 10 | Item No.10:Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mmx 40mm weighing 0.39 Kilogram / m.at 60cmsc/c an d fixed with (15x15mm) flanges weighing 0.119 Kilogram/ m suspended on 6mm dia.mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50mm x 40mm weighing 0.39 Kilogram/ m etc. including all labour etc. complete. |
| 11 | Item No.11:Providing and fixing false ceiling of 10 to12mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectral work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete.(excluding framework, runners and mild steel suspenders). |
| 12 | Item No.12: Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.complete |
| 13 | Item No.13: Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete. |
| 14 | Item No.14: Providing and laying in trenches 15mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 15 | Item No.15: Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materiasls outside etc.carefully and throwing out the refusal outside etc. complete. |
| 16 | Item No.16: Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall. |
| 17 | Item No.17: Providing and fixing Anglo Indian type white glazed earthen ware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc.complete. (prior approval of sample and brand by Ex.Engineer is necessary before use) |
| 18 | Item No.18: Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006 (Group-BIIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 19 | Item No.19: Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessaryluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box |
| 20 | Item No.20: Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 21 | Item No.21: Providing and laying telephone black / Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 22 | Item No.22: Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete |
| 23 | Item No.23: Providing and applying white-wash in two coats on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 24 | Item No.24:Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete |
| 25 | Item No.25: Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 26 | Item No.26: Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm.x 40cm. size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C.waste pipe and trap up to the outside face of the wall. Making good the damaged surface,testing etc. complete |
| 27 | Item No.27: Providing antitermite treatment around the periphery of the existing building as pe rI.S.6313(Part-III) by excavating trenches of 20cm width and exposing the sides of columns and plinth beams up to a depth of 300mm and injecting one percent of chlorodane emulsion concentrate at the rate of 2.25 litres per Runnin gmetre and refilling the trenches etc. complete covering 2 years guarantee on bond paper. |
| 28 | Item No.28:Providing antitermite treatment to the sides of flooring of the existing building a sperI.S.6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm.centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50ml per hole and sealing by filling putty etc.complete covering 2 years guarantee on bond paper. |
| 29 | Item No.29:Providing and fixing on side 45 cm deep small height storage at required location having height Upto 1.20 M & by using 18 mm thick plywood of the requisite manufacturer viz.Anchor / Century / Kenwood / Duro or equivalent generally conforming to IS 303 / IS 710 -1980 for frame , internal vertical, horizontal divisions, Openable shutters , to back and shall be finished with Laminate on top front and sides with grooves externally , CCTW beading & lipping as and where required with all material such as tower bolt, hinges, handles, lock as per detailed drawing including two coats of french polish with antitermite treatmnetto plywood and wood work and melamine polish extrnally etc. includijng all leads and lifts etc. complete as per Architects drawing and instructions of Engineer Incharge. |
| 30 | Item No.30:Free Standing Table @ 1350Lx600Dx750HT Providing and fixing Table of Size 1350 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. |
| 31 | Item No.31:-Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery |
| 32 | Part BInsurance + Royalty Charges |
| 33 | Insurance 1 % |
| 34 | Royalty Charges |
