Tender For Installations Of Outdoor Gym Items Zp Sonipat, sonipat-Haryana

Tender For Installations Of Outdoor Gym Items Zp Sonipat- 1 Outdoor GYM Equipments at various 2 Air Swing:- Providing, designing and fixing of airs swinging pair of size 1150x900x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge, Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GILLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts andbolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc 3 Pull Chair:-Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc 4 Twister:-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2x4 rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and sel lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 5 Bridge Ladder: Product Type Playing, Size: 2.0 x 2.0 mtr./3.0 mtrAll joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 6 SEE SAW:-Product type: Playing, Material:Mild Steel Seating:-2 SeaterAge group:-up to 12 Size:-6 feetAll joint shall be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc 7 Abb Trainer/Sit Up Brench:-Main Post-114mmPipe Size- 2x4Thickness pipe- 3mmPipe standard: GPPaint-Powder coating onlyPost caps- Aluminium/LLDPEScrews other- Nylon lock boltMaterial Mild SteelHolding Capacity120 kgAge Group13 years +patty material required to complete the job in all respect, All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burresto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the and base plate cover, all complete as per direction approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. 8 Double cross walker:-Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF 114 mm OD 42 mm OD And 32 mm ODConnecting Pipe-Made of Apollo Brand B CLASS GL. Pipe OF 32 OD.Handle Frame Made of Apollo Brand B CLASS GI. Pipe OF 42 OD.Handle Grip - Made of food Graded RubberBearing Ball bearing 6205zzBearing Caps - Made up of HDPE Material 62 mmSeats- Made of HR Sheet OF 2 mm Thickness.Pole Caps - Made up of HDPE Material.Flanges-8 mm ThickPowder Coated (Thickness 90 micron) 9 CYCLE:-Pipe- structure made of GI. Pipe (IS1239-2004) OF 4 OD 42 OD and 32 OD of 3 to 4 mm thicknessBearing Caps- Made up Seats structure made of M.S. SHEET OF 3 TO 4 mm Thickness.Arm-structure made of GI pipe 32 OD 4 mm thickness.Bearing- Ball bearingFoot Rest - structure made of M.S. SHEET OF 2 mm Thickness.Bearing Caps-Made up of HDPE Material. Seats:- Made up of MS Sheet of 3 to 4 mm thicknessPole Caps-Made up of HDPE Material. Paint:- Powder Coated (Thickness 90 micron) 10 LEG PRESS:-1. Center main pipe 114mm. B class(3mm to 3.5mm. thickness)2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness)3. Both side vertical structure pipe 40mm.4. Seat metallic sheet 3mm to 3.5mm. M.S5. Footrest M.S Checked plate 4mm. thickness6. Permanent lubricated sealed bearing of reputed brand.7. Nuts & Bolts Galvanized.8. Nylon covers for covering the nuts & bolts. 11 PARALLEL BAR:-MaterialFinish Powder CoatedProduct Area 1828 x 685 x 1524 mmSafe Play Area2438 x 1220 mmHandle Frame 38 mm OD G.1. pipeParallel Bar made up of 2 inch B class Gl pipe; Prime Stand duly bend, Foundation center pipe.All welded joint are of good quality.High tensile steel with galvanized nut & bolts to be used. The powder coating done with Pure polyester powder with 60 to70 micron thickness. 12 PUSH UP BAR:-Mimum Order Quantity1 PieceUsage/Application Only For Outdoor UseMaterial GI. Mild SteelAutomation Grade ManualDimension3600 X 1450 X 2350 mmMax. User Weight110 KgPipe Dimension - Main Post 140 mm dia and other post 40 mm dia. All joint shell be lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment tobe fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc 13 Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled scaled and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipmentto be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-Charge regarding material, shape of equipment, colour on metal seat and base cover plate and fixing of equipment etc.- According N.S. item. 14 Providing, designing and fixing Arm wheel in a pair of size 850 X 800 X 1800mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item. 15 Providing, designing and fixing Elliptical Exerciser of size 1200 X 540 X 1600mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item. 16 Providing, designing and fixing Rowing Machine of size 1280 X 800 X 1500mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item.

INR 5180 /-

INR 399000.0 /-

Refer document

Name of Work:Specifications and terms conditions of Outdoor GYM Equipments at various locations of Zila Parishad, Sonipat

Sl. No.	Item Description
1	Outdoor GYM Equipments at various
2	Air Swing:- Providing, designing and fixing of airs swinging pair of size 1150x900x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge, Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GILLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts andbolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
3	Pull Chair:-Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc
4	Twister:-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2"x4" rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and sel lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
5	Bridge Ladder: Product Type Playing, Size: 2.0 x 2.0 mtr./3.0 mtrAll joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
6	SEE SAW:-Product type: Playing, Material:Mild Steel Seating:-2 SeaterAge group:-up to 12 Size:-6 feetAll joint shall be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
7	Abb Trainer/Sit Up Brench:- Main Post-114mm Pipe Size- 2"x4" Thickness pipe- 3mm Pipe standard: GP Paint-Powder coating only Post caps- Aluminium/LLDPE Screws other- Nylon lock bolt Material Mild Steel Holding Capacity120 kg Age Group13 years + patty material required to complete the job in all respect, All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burresto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the and base plate cover, all complete as per direction approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
8	Double cross walker:- Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF 114 mm OD 42 mm OD And 32 mm OD Connecting Pipe-Made of Apollo Brand B CLASS GL. Pipe OF 32 OD. Handle Frame Made of Apollo Brand B CLASS GI. Pipe OF 42 OD. Handle Grip - Made of food Graded Rubber Bearing Ball bearing 6205zz Bearing Caps - Made up of HDPE Material 62 mm Seats- Made of HR Sheet OF 2 mm Thickness. Pole Caps - Made up of HDPE Material. Flanges-8 mm Thick Powder Coated (Thickness 90 micron)
9	CYCLE:- Pipe- structure made of GI. Pipe (IS1239-2004) OF 4" OD 42 OD and 32 OD of 3 to 4 mm thicknessBearing Caps- Made up Seats structure made of M.S. SHEET OF 3 TO 4 mm Thickness. Arm-structure made of GI pipe 32 OD 4 mm thickness. Bearing- Ball bearing Foot Rest - structure made of M.S. SHEET OF 2 mm Thickness. Bearing Caps-Made up of HDPE Material. Seats:- Made up of MS Sheet of 3 to 4 mm thickness Pole Caps-Made up of HDPE Material. Paint:- Powder Coated (Thickness 90 micron)
10	LEG PRESS:- 1. Center main pipe 114mm. B class(3mm to 3.5mm. thickness) 2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness) 3. Both side vertical structure pipe 40mm. 4. Seat metallic sheet 3mm to 3.5mm. M.S 5. Footrest M.S Checked plate 4mm. thickness 6. Permanent lubricated sealed bearing of reputed brand. 7. Nuts & Bolts Galvanized. 8. Nylon covers for covering the nuts & bolts.
11	PARALLEL BAR:- Material Finish Powder Coated Product Area 1828 x 685 x 1524 mm Safe Play Area2438 x 1220 mm Handle Frame 38 mm OD G.1. pipe Parallel Bar made up of 2 inch B class Gl pipe; Prime Stand duly bend, Foundation center pipe. All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used. The powder coating done with Pure polyester powder with 60 to70 micron thickness.
12	PUSH UP BAR:- Mimum Order Quantity1 Piece Usage/Application Only For Outdoor Use Material GI. Mild Steel Automation Grade Manual Dimension3600 X 1450 X 2350 mm Max. User Weight110 Kg Pipe Dimension - Main Post 140 mm dia and other post 40 mm dia. All joint shell be lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment tobe fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
13	Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled scaled and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipmentto be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-Charge regarding material, shape of equipment, colour on metal seat and base cover plate and fixing of equipment etc.- According N.S. item.
14	Providing, designing and fixing Arm wheel in a pair of size 850 X 800 X 1800mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item.
15	Providing, designing and fixing Elliptical Exerciser of size 1200 X 540 X 1600mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item.
16	Providing, designing and fixing Rowing Machine of size 1280 X 800 X 1500mm fabricated with main post of 140mm dia and 3.00mm thick and other pipe of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp deges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and slef lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 J shaped wilded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.- According N.S. item.