Military Engineer Services-MES has published Tender For Special Repairs To Certain B/R Bldg No T-04 Of Otm Accn, Roof Treatment Of Age E/M Office And Addition/Alteration Of Dining Hall Of Ors Mess Bldg No P-06 At Tibri Mil Stn Under Age B/R-Ii, Ge Gurdaspur.. Submission Date for this Tender is 12-03-2024. Shed Construction Tenders in gurdaspur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-03-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of roof brick tiles fixed in cement mortar in single layer |
| 2 | Demolition mud phuska in roofs any thickness including plastering and leeping all as spd |
| 3 | Roughening the surface of old concrete floor, picking sweeping cleaning and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm. |
| 4 | Material & labour cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding finishing suface even and smooth without using extra cement complete all as specified. |
| 5 | M&L for applying evenly a tack coat of hot industrial bitumen 85/25 at the rate of 1.6 kg per sq.m on roof surfaces complete all as specified and as directed. |
| 6 | M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed. |
| 7 | M&L for 40 mm thick brick tiles laid over and including 15 mm thick cement mortar 1:6, joints grouted and flush pointed in cement mortar (1: 3) mixed with 5 % of crude oil by weight of cement, flush pointing in cement mortar (1:3) shall be done as a separate process, complete all as specified and directed. |
| 8 | All as per Srl item No 07 above but except tiles |
| 9 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed. |
| 11 | M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair,laid in alternate bays not exceeding 3.0m in length, complete all as specified and as directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removingrubbish off the premises complete all as directed. |
| 13 | M&L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to matchincluding 15 mm thick screed bed in cm 1:6 complete all as spd. |
| 14 | M&L for ceramic glazed dark shade coloured tiles of size 350x250x7mm/ 450x350x7mm thick joint free on and including 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces as in skirting/dado complete. |
| 15 | M&L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to matchincluding 15 mm thick screed bed in cm 1:6 complete all as spd. |
| 16 | M& L Non skidcoloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm but not exc. 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6complete all as spcified and directed. |
| 17 | M&L plaster 15mm thick in cm 1:3 in sunken portion of slab/ roof slab using waterproofing compound complete all as specified and directed.Note : Supply only of WPC shall be measured and paid separately. |
| 18 | M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surface using water proofing compound complete all as specified and directed. Note :- Supply only WPC shall be measured and paid separately. |
| 19 | Supply only integral water proofing compound as per manufacturer"s instructions. |
| 20 | M&L for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in filling fdn and mass concrete in sunken floor |
| 21 | M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed. |
| 22 | M&L 15mm thick cement plastering in cm 1:6 on other than fair faces of brick or concrete surface, finished the surfaces even and smooth without using extra cementall as spd & directed. |
| 23 | All as per item No 22 above but 5mm thick on ceiling in CM 1:3 |
| 24 | M&L 15mm thick cement plastering in cm 1:4 on fair faces of brick or concrete surfaces, finished the surfaces even and fair with using water proofing compound complete all as specified & directed. Note : Supply only WPC shall be measured and paid separately. |
| 25 | Taking down cement plaster any description on brick or stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. |
| 26 | M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approvedcomplete all as specified and directed. |
| 27 | M & L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified & directed. |
| 28 | Preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade)on walls over a coat of primer complete all as specified. |
| 29 | M&L onecoat ofOBD on old decoratedwall surface including preparation of surfaces complete all as spc. |
| 30 | M& L for one coat of white wash on old treated ceiling surfaces including preparation of surfaces |
| 31 | M& L for one coat of cement base paint over old surface including preparation of surfaces all as specified & directed. |
| 32 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. |
| 33 | M&L for preparation of new steelsurface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 34 | Taking down chowkats or frame with shutter n.exc 1.50 Sqm each (without taking off shutter from the chowkat or frame) as spd |
| 35 | All as per Srl item No 34 above but exc 1.50sqm but n.exc 4.00 Sqm |
| 36 | Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm |
| 37 | Supply and fix for pressed steel framesof size 105 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate,including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of frames including one shop coat of red oxide primer and two coats of synthetic enamel paint and preparation of surfaces completeall as specified and as directed. |
| 38 | All as per Srl item No 37 above but 125x60 mm. |
| 39 | Supply and fix for rolled mild steel framed work as in doors or gates, chowkats of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening, conforming to Fe-290 Grade-E-165 complete all as specified and as directed. |
| 40 | S&F Factory Made Solid PVC Moulded Door Shutter white particle board core, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as specified and directed. |
| 41 | S&F 30mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a)fitted to chowkats complete all as specified and directed. |
| 42 | All as per Srl item No 41 above but 35mm thick. |
| 43 | S&F 32mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides, both faces covered with lamination with lipping/ frame of 2nd class hard wood to match complete all as specified and directed. |
| 44 | Supply and fix for 35mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 45 | S&F Aluminiumanodized barrel tower bolt of extruded section 150mm long |
| 46 | All as per Srl item No 45 above but 250mm long |
| 47 | S&F aluminium alloyed handle casttype anodized of size 100mm long |
| 48 | All as per Srl item No 47 above but 150mm long |
| 49 | S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 50 | S&F butt hinges medium weight cold rolled mild steel 100mm size |
| 51 | S&F 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/ bolts/ screws in metal/ wooden frame complete all as specified and directed. |
| 52 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete |
| 53 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed. |
| 54 | Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed. |
| 55 | Taking down steel window any size complete all as specified and as directed. |
| 56 | S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged& glazed, shutter frame of ERW tube P section size50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of red oxide primer and two coats of synthetic enamel paint complete:- (i)Thickness of the sheet shall be of 18 gauge(ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii)Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv)MS Tower bolt 150mm long-02 Nos per leaf(v)Z section 20mmX25mm,100mm long stopper -01 Nos per leaf(vi)Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii)MS pintol hinges size 75mmx12mm- 2 Nos. per leaf(viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately |
| 57 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated)comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge.(ii)Glass/ wire mesh, shall be measured and paid for separately |
| 58 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks all as spd |
| 59 | Taking up and down GI pipe15mm bore including fittings, connection all as spd |
| 60 | All as per Srl item No 59 above but 20mm bore of pipe |
| 61 | S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittingsISI marked all as spd |
| 62 | All as per Srl item No 61 above but fixing only (old serviceable pipe re-used including cleaning) |
| 63 | S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittingsISI marked all as spd |
| 64 | All as per Srl item No 63 above but fixing only (old serviceable pipe re-used including cleaning) |
| 65 | S&F rotional moulded water storage tank of 1000 ltr capacity white (cylinderical vertical with closed top) hoisted and fixed in position including demolition of old unserviceable WT all as spd. |
| 66 | S&F in repair bib taps 15mm dia cast copper alloy, chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed. |
| 67 | S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed |
| 68 | S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc all as spd |
| 69 | S&F in repair brass CP shower rose 125mm size with swivel joint fancy type as spd |
| 70 | S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 71 | S&F in repair tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flangesincluding brackets complete all as specified and as directed. |
| 72 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or floor all as specified & directed. |
| 73 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified. |
| 74 | Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required |
| 75 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc completeall as specifiedNote:- Flush pipe and flushing cistern to be measured and paid separately. |
| 76 | S&F in repairs 08 to 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle,connections, jointsto pipes,complete all as specified and as directed. |
| 77 | S&F in repair Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern. |
| 78 | S&F in repair Vitreous china wash basin, white flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32mm borebrass CP waste coupling & 32mm bore PVC waste pipe all as directed & specified. |
| 79 | S&F in repair 15mm bore Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 80 | S&F in repair vitreous China half stall type urinal , of size 345x320x560mm, white, with brass CP spreader including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2),securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, grating and union for discharge pipe, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms) complete all as specified and as directed. |
| 81 | S&F PVC waste pipe 32mm dia 600 to 750mm long fixed to wash fitting ofurinal all as specified and directed. |
| 82 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm |
| 83 | S&F 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 84 | S&F PVC (SWR ) bends 110 mm bore any radius |
| 85 | S&F PVC (SWR ) bends 75 mm bore any radius |
| 86 | M&L PVC (SWR ) floor trap 75 mm plain with grating including jointing with solvent cement |
| 87 | S & F Stack clamps (100 mm pipe) out of 20 mm by 1.5 mm GI flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof |
| 88 | All as per Srl item No 87 above but 75 mm bore |
| 89 | Demolition of brick masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed. |
| 90 | M&L for brick work with flyash bricks sub class "B" brick straight curved on plan exc 6m mean radius built in CM 1:6 brick complete all as specified and directed. |
| 91 | M&L for brick work with flyash bricks sub class "B" old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:4 brick complete all as specified and directed. |
| 92 | M&L for brick work with sub class "B" old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:4 brick complete all as specified and directed. |
| 93 | Supply and fixing in repair curtain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc. fixed to wall with screws, PVC plug complete all as specified and directed. |
| 94 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, cable, pipe, pole, stay etc. orfor shafts, wells, cesspits, manholes, pier holes, cable etc. n. exc 10 sq m on plan and n exc1.5 m in depth and getting out, including taking out brick protection for cable if any all as specified & directed. |
| 95 | Returning, filling in, soils including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified & directed. |
| 96 | Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified & directed. |
| 97 | Surface excavation n exc 30cm deep and averaing 15cm deep and getting out in soft/ loose soil. |
| 98 | Demolition and breaking up old unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete)150 mm bore at any depth set in cement mortar includind PCC bed complete all as specified & directed. |
| 99 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed. |
| 100 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in concrete bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed. |
| 101 | Supplying, laying in trenches, jointing and testing Reinforced concrete pipes 150mm bore, class NP3, laid and jointed complete with collars at any depth over PCC bed complete laid in trenches as specified |
| 102 | Supplying, laying in trenches, jointing and testing Reinforced concrete pipes 200mm bore, class NP3, laid and jointed complete with collars at any depth over PCC bed complete laid in trenches as specified |
| 103 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone agg as in foundations, filling, mass concrete, sub base complete all as spd |
| 104 | M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, apex stone, bed plate, kneelers, hold fast blocks etc. complete all as specified. |
| 105 | M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab for manholes and similar work etc complete all as specified. |
| 106 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 107 | M&L Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified. |
| 108 | Taking down cement Plaster /deteriorated concrete from bottom of RCC chajjas /RCC facia /RCC beam/RCC slab/brickwork including racking out joints ,hacking for key ,scrubbing down with water (at a bldg height upto 4.50 m) and removing rubbish to a distance exceeding 50m but not exceeding 100m away and M & L for 15 mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC chajja & RCC facia complete all as specified and directed by Engineer -in-Charge |
| 109 | M&L for hardcore of broken stone or boulders of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 110 | M&L moorum/ red bajri filling in floors or paving laid in layers n. exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 111 | Material and labour for RCC (design mix) M-25 (using 20mm gradedbroken stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete complete all as specified and as directed. |
| 112 | Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 113 | Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in columns, pillars, piers,posts and struts complete all as specified and as directed. |
| 114 | Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.50m span complete all as specified and as directed. |
| 115 | Material and labour for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any ) of foundation and plinth beam and similar works, vertical or batter etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 116 | Material and labour for formwork to sides of pillars, posts, struts, columns and stanchions, square, rectungular or polygonal for rough finished surfaces of concrete complete all as specified and as directed. |
| 117 | Material and labour for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves, bands, including supports, overhangs, etc. for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 118 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (Horizontal or sloping) rough finished surface of concrete flat complete allas specified and directed. |
| 119 | M&L for green marble (any type) work 14-18 mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and like over and including 15mm thick cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 120 | M&L for vitrified designer, heavy duty tile of size 400mm x 400mm x 12mm thick coloured, outdoor , set , jointed and pointed in neat cement slurry with white cement and pigment as in path/ floor, pattern of tile as approved by GE over and including 15mm thick screed bed in CM 1:6 and screed complete all as specified and directed. |
| 121 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 122 | M&L for sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 123 | M&L for 60mm thick coloured machine pressed pre cast concrete interlocking tiles/ paver block any shape/ size as conforming to IS 15658-2006 of M-35 grade with grey cement and pigment complete all as specified and directed. |
| 124 | M&L for cutting into existing manholes for connecting 200mm dia RCC pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. |
| 125 | M&L for PCC 1:3:6 type C-2 (using 20mm graded aggregate) as in mass concrete foundation of manholes all as specified and directed. |
| 126 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channel and drain complete all as specified and directed. |
| 127 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopper ends etc complete all as specified and directed. |
| 128 | E/M PORTIONTaking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator socket etc completeat site and making goods disturbed surfaces of walls, floors etc. |
| 129 | Point wiringwith PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings andmaking good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC sheathed single core multistrandedFRLS copper conductor cable of size 1.5 Sqmm to commonearth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light point/ Fan/ bell point controlled by one way switch |
| 130 | All as per Srl item No 129 above but one 5/6 pin socket outlet 5 amps on same board. |
| 131 | All as per Srl item No 129 above but 5/6 amps socket outlet on independent board. |
| 132 | All as per Srl item No 129 above but one light point controlled by two way switches. |
| 133 | All as per serial item No.129 here-in-before but with multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) with continuous earth wire multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) for 3 pin 15/16 Amps socket outlet on independent board. |
| 134 | M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt , FRLS cableof size 6 sqmm including 6sqmm multistranded copper conductor FRLS cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade, of not less than 1.2mm thick and 32mm dia., concealed in wall with accessories including cutting chases andmaking good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed. Note :- (a)Three run of cable alongwith PVC conduit together shall be measured as single run. |
| 135 | S&F switch piano flush type single pole one way 5/6 amps. |
| 136 | S&F socket outlet 3 pin 5/6 amps flush type. |
| 137 | S&F switch flush type 15/16 amps single pole one way |
| 138 | S&F socket outlet 3 pin 15/16 amps flush type |
| 139 | S&F switch piano 2 way 5/6A all as specified and directed. |
| 140 | S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rodsingle sidedcomplete all as specified and directed. |
| 141 | S&F in replacement LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting completeall asas specifiedand directed. |
| 142 | Taking down carefully ceiling fan complete fittings at site, removing fans, deposting to MES store yard and taking back to site for refixing complete all as specified and as directed. |
| 143 | Hanging only ceiling fanand connecting up including provision of cable from ceiling rose to connector of fan all as specified and directed. |
| 144 | S&F in replacement of fan regulator electronic type 5 step 100 watt, 240 volt and connecting complete all as specified and directed. |
| 145 | S&F bell, AC, 230 Volts, single pole complete all as specified and directed. |
| 146 | S&F bell push flush type 5/6 Amps complete all as specified and directed. |
| 147 | Supply and fix for lamp holder angle type, PVC/ polycarbonate type with back plate, suitable for lamp holder base of and including 9 watt LED retrofit lamp complete all as specified and as directed. |
| 148 | M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body |
| 149 | S&F in replaceemnt GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. |
| 150 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact andcorrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 151 | Supply andfixed in repair sheet metalenclosure forDB’s when MCB’s to beused, 240 volt 8 way SPN with bus barand double door complete all asspecified anddirected.Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed |
| 152 | S&F in repair MCB single pole 6 amps to 32 amps, "C" series complete all asspecified anddirected. |
| 153 | S&F in repair MCB single pole and neutral 32 amps, C series complete all as specified and directed. |
| 154 | Material and labour for replacement of distribution board made out of CRCA sheetDB vertical type double door TPN 4 Way MS sheetincluding fixing in the wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing thefolowings:-(a)MCCB 4 Pole 63 Amps 16 KA breaking capacity with thermal release:01 No(In coming). (b)Bus bar made out of Aluminium duly insulated with wire adhesive tape RYB & black :4 Nos.(c) MCB SPN 40 Amp: 4 Nos, MCB SP 40 Amp: 04 Nos (Out going).(d)Connection from MCCB to bus bar will be made with Aluminium Strip of suitable capacity as directed. |
| 155 | M&L Earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision ofconcrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge. |
| 156 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately. |
| 157 | Supply and lay brick common burnt sub class "B" old size for protection of cable laid in trenches for under ground cable all as specified. |
| 158 | M&L sand cushioning in trenches using fine sand to under ground cable, laid in two layers15 cm before laying the cable & 8 cm after laying the cable complete all as specified. |
| 159 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed. |
| 160 | A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
