Military Engineer Services-MES has published Tender For Additional/Alternator To Gabru Block, Bldg N0-40, Wall Paneling And Special Repair To Salvage Store Of Logistic Section At Various Locations Under Ge Missamari. Submission Date for this Tender is 19-03-2024. Building Work Tenders in missamari Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-03-2024 |
| 2 | 14-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-03-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cementplaster of any description from brick or stone wall etc incl racking out of joints , hacking for key anf scrubing down with water etc complete all as specified and directed. |
| 2 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surface finished fair and even all as specified. |
| 3 | M&L rendering 5mm thick on other than fair faces ofconcrete Surfaces in cement mortar 1:3 finished even and smooth. |
| 4 | Taking down wooden chowkats or frames exc 1.5 sq. m but n exc 4 sq m each |
| 5 | M&L Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete. |
| 6 | Non skid ceramic colour joint free tiles 7 to 8 mm thick area each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed innet cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 . |
| 7 | Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 . |
| 8 | M&L for Non Skid Ceramic tiles 7-8 mm thick of area exceeding 0.18 Sqm but not exceeding 0.38 sqm each, in floors/skirting etc. over & incl 15 mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface CM bedding complete all as specified and as directed. |
| 9 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed. |
| 10 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 11 | Supply and fixing factory made uPVC white colourThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately). |
| 12 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 13 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profilewilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. |
| 14 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section. |
| 15 | S&F stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed |
| 16 | S&F 25 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 17 | S&F 15mm bore bib tap cast copper alloy fancy type chromium plate with crutch or butter fly handle screwed down for iron pipe but fancy type. |
| 18 | S&F 15mm bore stop cock/valve cast copper alloyscrewed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete. |
| 19 | S&F PVCconnection pipe 600mm longwith two nos PTMT nut threaded coupling for 15mm dia. |
| 20 | S&F Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed. |
| 21 | S&FChromium plated brass fancy soap dish, complete all as specified and as directed. |
| 22 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 23 | S&Fvitreous china wash down water closet pan (pedestal pattern), complete all as specified and as directed. |
| 24 | S&F plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repair, complete all as specified and as directed. |
| 25 | S&F10 litre capacity PVCtype low level flushing cistern with inlet ball valve, float and handle/push flush type brackets etc complete . |
| 26 | S&F vitreous china wash basinwhite, flat back, size 550x400mm excluding taps , waste ,but including barkets. |
| 27 | S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 45 gms). |
| 28 | S&F Toilet paper holder, vitreous China, box type complete all as specified and as directed. |
| 29 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromimum plated brass screws and cup washers. |
| 30 | S&F 100mm dia PTMT grating. |
| 31 | S&F 75 mm thick PVC (SWR pipes single socketed in any length with rubber ring joints laid in trenches or floors. |
| 32 | M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 33 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls. |
| 34 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 35 | S & F 110 mm bore PVC (SWR) Vent Cowl |
| 36 | Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 37 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. |
| 38 | M&l for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted ) with silicon additives @1.43 litre / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm over new surfaces |
| 39 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. |
| 40 | M&L two coats ofdistempering walls with distemper emulsion or tinted including preparation of surface . |
| 41 | Preparation of new plastered surfaces and applying three coats of white wash on wall all as specified and directed. |
| 42 | Supply only integral WPC |
| 43 | Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius,in half brick wall built in cement mortar 1:4 complete all as directed. |
| 44 | Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete. |
| 45 | S&F stainless steel 1 mm thick for kitchen with plug waste pipe washer includind cantiliver cast iron brackets conntecting union etc overall size 495 mm X 420 mm with wall size 410 mm X 330 mm X160 mm |
| 46 | S& F chromium fitted brass over head shower rose 125 mmwith arm as in repair to fixed to 15 mm bore of iron pipecomplete all as specified and as directed. |
| 47 | Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) |
| 48 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 49 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15 cm thick below or above ground level. |
| 50 | M&L 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooringcomplete all as specified and directed. |
| 51 | Material and labour for 75mm thick PCC 1:3:6 type C2as in plinth protectioncomplete all as specified and as directed. |
| 52 | M& L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed. |
| 53 | M& L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick cement screedin CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified as directed. |
| 54 | M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @3% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement. |
| 55 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed by the Engineer-in-Charge. |
| 56 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc., |
| 57 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm complete all as specified and as directed. |
| 58 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top including taking down existing treatment complete all as specified and directed. (i) Screed bed or bedding layer 10 mm thick in CM 1:4 as in roof Slab including preparation of surface to receive screed bed. (ii) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (iii) APP based polymeric membrane 3mm thick, minimum weighing 3.5 Kg/sqm, reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen. (iv) Applyingtwo coats of aluminum paint over the APP membrance . |
| 59 | S&F Framed work as in doors or Gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering Door,etc to beprepared for hanging or sliding withand including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging,also fastening and fixing cpmplete, Fe-290(Gde E-165). |
| 60 | M&L Plain or corrugated steel sheets, any thickness in available sizes, black Complete all as specified and as directed. |
| 61 | M&Lfor preparation of newly plastered surface of ceilings and apply three coats of white wash, complete all as specified and as directed. |
| 62 | M&L applying two coat of cement base paint over a coat of cement base primer on newly plastered surfaces of walls including preparation of surfaces. |
| 63 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 CM width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 64 | Dismantling of structural steel work including doors, gates but excluding frame truss etc. complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) 150mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints with and including all necessary fittings such as bend, tee, junctions, traps etc fixed to walls, complete. |
| 66 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. |
| 67 | TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 68 | Form work toside & soffits of floor or roof beams lintels & similar works. |
| 69 | M&L forM25 RCC design mix using 20 mm graded aggregate for beams, cantilevers, chhajja, lintels over 1.5 m span. |
| 70 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets. |
| 71 | S&F solid pvc wall linning consisting of 5mm thick colour wood grained PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specification and drawing. |
| 72 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications. |
| 73 | S&f mild steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars welded complete all as specified and as directe. |
| 74 | S&F sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane thickness of glass 3mm complete all as specified. |
| 75 | S&f mild steel framed bars confirming to fe 290 gde e-165 complete all as specified. |
| 76 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors & skirting etc. set and jointed innet cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM 1:6 complete all as specified and as directed. |
| 77 | Taking down carefully existingunserviceable copper/ aluminiumpoint wiring (light,fan , call bell, two way, socket orpower point etc)completewith fittings/fixures such asswitches sockets, ceiling rose, fan regulators,bracket light fittings and making goodto the disturbedsurface complete all asdirected by Engr-in-Charge. |
| 78 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge. |
| 79 | Taking down carefully unsv aluminium submain wiring of any type /locationincludingconduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 80 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. |
| 81 | Material and labour for point wiring with 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including PVC conduit of appropriate size concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dollyfor fan / light / exhaust fan/ bell point controlled by one switch. Note:- 1. Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. 2. Cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3)and ,putty and plastic paint matching with existing surfaceetc; shall be deemed to be included in the rate quoted above. : (a) One light ,fan , bell point controlled by one, one way switch 5 Amps |
| 82 | Ditto as per item no. 87 above but ofOne 3 point 5 Amps socket outlets point controlled by one switch on the same board |
| 83 | Ditto as per item no. 87 above but ofOne 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board |
| 84 | Description all as per item No 87here in before but for one light point controlled by one, two way switch 5 Amps |
| 85 | Description All as per item No 87above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board. |
| 86 | Description All as per item No 87 above but with two run of 4.0 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 4.0Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board. |
| 87 | S & F Switch piano (white) flush type single pole one way 5 Amp, 230 Volts complete all as specified. |
| 88 | S & F Switch piano (white) single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed. |
| 89 | S & F in replacement bell pushflush type (white) 5 amps, 230 volts.complete all as specified and directed.. |
| 90 | S & F Socket outlet (white) 2 in 1, 5 pin, 5 Amps complete all as specified and directed. |
| 91 | S & F Switch socket combination (white) flush type multipurpose5/6 pin 5 Amps two in one , 230volts complete all as specifiedand directed . |
| 92 | S&F Switch socket combination (white) 2 in 1 5/6 pin, 15 Amp flush type universal. |
| 93 | S&F ceilling rose(white) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified |
| 94 | S & F ceiling fan regulator (white) step type 2 module , flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified. |
| 95 | S & F call bell suitable to work on 230 volts Ac supply including removal of old unsv call bell complete all as specified. |
| 96 | S & FLamp holder (white) with insulated body, with back plate suitable for pendant / batten fittingscomplete all as directed. |
| 97 | S & F LED ADORE 10 W B22 CDL 5 STAR LAMPwith B 22 base capacity 1200 lumencomplete all as specified. |
| 98 | S & F North West Socket for AC short circuit protection motor starterwith MCB DP 25 Amps capacity AC230 Volt with Plug Top with Indicator. |
| 99 | S & F sheet metal enclosure MCB DBTPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified |
| 100 | S & F MCBFP415 volts suitable for fixing in MCB TPN DB of capacity 63 amps complete all as specified and directed. |
| 101 | S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 8 way with common bus bar. |
| 102 | S & F MCB "B" curve single pole neutral , 32 Amps with breaking capacity 10kA, |
| 103 | S & F MCB "B" series single pole 5 to 32 Amps, breaking capacity 10KA. |
| 104 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorativeultra slim round profile LED lighting fixture with extruded polycarbonate , environmental friendlyenergy efficiebt ready to use packwith driver, holder including LED tube lightconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make :- Havells / Crompton / Philips / Surya |
| 105 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make :- Havells / Crompton / Philips / Surya |
| 106 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Make Crompton / Havells /USHA |
| 107 | Excavation in trenches n exc 1.50 m wide andn exc 1.50 m depthin soft /loosesoil andgetting out for lying of cable and errection pipeetc complete all as directed. |
| 108 | Returning, filling in, trenches insoft /loose soilincluding spreading, leveling, watering and well ramming in layers not exc 25 cmcomplete all as directed. |
| 109 | Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting pointcomplete all as directed. |
| 110 | Materal and labour for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment) |
| 111 | Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified. |
| 112 | Supply & Laying XLPE LT heavy duty UG Cable of size 35 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. |
| 113 | S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed. |
| 114 | Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 1.5 Sqmmfrom ceiling rose to fan terminal over hauling the fan complete all as specified and as directed. |
| 115 | M & L for sub main wiringwith 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed. |
| 116 | Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item. |
| 117 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GIearth wire 4 mm dia connected tomain earthing lead from earth electrode to test point upto 7.5 metre drawn through and including GI protection pipe of light grade 15 mmbore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I. |
| 118 | Supply and Fix Cable end termination kit for LT1.1 KV Cable for Cable 35Sqmm 3.5 Core cable complete all as specified and directed . |
| 119 | S & F MCB Double Pole 25 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. |
| 120 | Supply & Laying XLPELT heavy duty UG Cable of size 10 Sqmm 2 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.Make :- Havells / Polycab / Gloster /KEI |
| 121 | Supply & fix Air Circulator wall mountedfans 230 volts single phase oscillating 450 mm sweepsuitable for wall mounting duly fixed with clamps on walls duly tested complete all as specified and directed. MakeHavells / Crompton / USHA / Orient |
| 122 | M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor duly cutting chases on walls anddrawn through and including non-metalic Rigid PVC Conduit ISI marked and itsaccessoriesincluding one run of single core 6.0 sqmm PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs and making good disturbed surfaces and matching with existing colour complete all as specified and directed.Make :- Havells / Polycab / RR Kabel / KEI |
| 123 | S & F MCBSPN230volts suitable for fixing on MCB DB of capacity 40Ampscomplete all as specified.Make -L&T/Schneider/Seimens/Legrand |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
