|
| 1 | Dismantling doors, windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, holdfasts etc. complete and stacking within 50 metres lead |
| 2 | Providing and fixing factory made single extrudedFrame size 65 x 100 mm WPC (Wood Polymer Composite) solid door/window & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body thread star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 3 | Providing and fixing factory made single extruded 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 4 | Providing and fixing aluminium tower bolts100x10 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 5 | Providing and fixing aluminium handles 125 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 6 | Providing and fixing ISI marked M.S. pressed butt hinges 100x58x1.90 mm bright finished with necessary screws etc. complete |
| 7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 8 | Providing and fixing aluminium hanging floor door stopper, Single rubber stopper , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 9 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 12 | Supply and fix Unplasticized PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed |
| 13 | Supply and fix Unplasticized PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed |
| 14 | S & F (SWR) PVC pipes 75mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed.. |
| 15 | S&F PVC (SWR) bends any radius, 75mm bore with / without access door, complete all as specified and directed. |
| 16 | S&F PVC (SWR) floor trap with and including, plain / single hole chromium plated grating including jointing to waste pipe with solvent cement, 75mm dia, complete all as specified and directed. |
| 17 | Supply & fix 75mm dia outlet PVCNahani trap with grating as fixed in repairs complete all as specified and as directed. |
| 18 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 20 | Providing and fixing wash basin on granite platform, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with single 15 mm C.P. brass pillar taps complete all as specified and as directed. |
| 21 | Providing and fixing P.V.C. waste pipe, 32 mm dia, flexible pipe for sink or wash basin including P.V.C. waste fittings complete |
| 22 | Providing and fixing C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 |
| 23 | Providing and fixing C.P. brass stop cock (concealed) of 15 mm nominal bore of standard design and of approved make conforming to IS:8931. |
| 24 | Providing and fixing C.P. brass angle valve15mm bore, complete all as specified and directed. |
| 25 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length and 15 mm nominal bore |
| 27 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. etc complete all as specified and directed. |
| 28 | S&F Health faucet, brass body with 1mtr SS braided rubber hose pipe & wall hookcomplete all as specified and as directed Make CERA or equivalent |
| 29 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete :300 mm weighing not less than 330 gms |
| 30 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete all as specified and directed. |
| 31 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357mm |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 33 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 34 | Providing and laying Glazed Vitrified tiles Matt/Antiskid finish size of Tile 600 x 600 mm sqm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 35 | Demolishing brickin cement mortarmanually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 36 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level inCement mortar 1:6 (1 cement : 6 coarse sand) |
| 37 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 38 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 39 | M&L for Distemperingon old work 1st quality acrylic distemper (readymade) with two coats having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. |
| 40 | Dismantling wooden boardings of thickness above 10 mm up to 25mmin lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead |
| 41 | Supply and fixing Armstrong optra 15mm beveled teular with suprafine 15mm thick grid channels and accessories complete. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance =85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessary angle of make -Armstrong or equivalent approved. |
| 42 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead |
| 43 | S & F PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls, 150mm bore, including Bands, straps, supports or stays for rainwater complete all asspecified and directed. |
| 44 | S & F Multiwood, 18mm thick, made up of UPVC polyster resin (which shall be 100% waterproof, termite and borer proof, corrosion free and fire retardant), fixed with screws to timber frame work, complete all as specified and directed. MAKE:- Thomson, Polywood, Woodtex |
| 45 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 46 | Providing and fixing 18 mm thick Granite stone slab colour black, cherry /Ruby redgang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 47 | Complete removal of existing treatment on walls and Finishing walls with Acrylic Smooth exterior paint of required shade Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth including, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots at any height including scaffolding and necessary arrangements and complete all as specified and directed by Engineer-in-Charge |
| 48 | Complete removal of existing treatment on walls and applying two coat of oil bound distemper emulsion paint, white or tinted as decided, over a coat of primer over a coat of wall care putty of 3mm thick, complete all as specified and directed. |
| 49 | M&L for vitreous China wash basin, flat back, size 580mm x 450mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand with and including provision of Waste coupling of PTMT 32mm dia (half or full threaded) (Minimum weight shall be 45gms), fixed in repairs, complete all as specified and directed. |
| 50 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 51 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 52 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth,complete all asspecified and directed. |
| 53 | S&F in repairs bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule all as specified and as directed |
| 54 | Supply and fixing repair of 15 mm dia CP pillar cocks fancy type for wash hand basin including taking down existing pillar cock, all as specified and as directed. |
| 55 | S&F in repairs stop valves 15mm bore, cast copper alloy chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. |
| 56 | Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 57 | M&L for Rendering 15mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 58 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 59 | Taking down carefully old and unserviceable copper / aluminium point wiring for light/fan/socket or power point complete including fittings such as switches, ceiling rose, pendants,regulators, sockets, bell, distribution boards andMCB\"s etc and making good disturbed surface of walls. floors etc to match with the existing surface complete all as specified and directed. |
| 60 | M&L Point wiring for light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate and cover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required . |
| 61 | M&L Point wiring for fan point/Exhaust pointwith 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate andcover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required . |
| 62 | M&L submain wiring for 5Amp socket outlet point on independent board with 2x 1.5 sq mm single corePVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with multistandard copper conductors and earth continuity wire with similar1x1.5 sq mm cable (incl connecting to earth dolly) drawndrawn through andsingle core cablein surface/recessed medium class PVC conduit as required atsitecomplete all as specified and directed. Note: 2 runs of cable and one run of earth wire and one run of conduit will be measured as single unit for payment. |
| 63 | All as per item No 48 above but wiring for circuit alongwith 2x 2.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1x2.5 sq.mm copper cable as as earth wire as required for 16/15 power plug/socket. Note: 2 runs of cable and one run of earth wire and one run of conduit will be measured as single unit for payment. |
| 64 | All as per item No 48 above but wiring for circuit alongwith 2x4 sq.mm FRLS PVC insulated copper conductor single core cable and1x4 sq.mmcopper cable as as earth wire as required for 16/15 power plug/socket or industrial socket. (FOR GYSERConnection). Note: 2 runs of cable and one run of earth wire and one run of conduit will be measured as single unit for payment. |
| 65 | Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular switch and 5/6A modular socket ,connection etc. as required atsitecomplete all as specified and directed. (for Independent & same board) . |
| 66 | Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular switch and 15/16A modularsocket ,connection etc. as required atsitecomplete all as specified and directed. |
| 67 | S&F ceiling rose PVC polycarbonate three terminal surface Bakelite complete. |
| 68 | Supply and fixing of9W LED indoormirror lighthaving Aluminium body with PC Diffuser wall mounteddecorative type, dimension L :310 mm, H : 52 mm, W: 26.8mm ,white body colour, input voltage range : 100v-265 v Ac . Power factor > 0.9, surge protection upto 3Kv including connecting up withthree core flexible copper conductorof suitable size from ceiling rose to light fittingsall as specified and directed. |
| 69 | Supply and fixing MCB distribution boardsingle pole and neutral 6 way, Double door sheet steel, 240 V, on surface /recess, complete with tinned copper bus bar ,neutral bus bar, din bar, interconnections, powder painted including earthing etc as required.(For bathroom ). |
| 70 | Supply and fixing 5 A to 32 A Singlepole and neutralrating,240/415V,10KA \"C\" curve, miniature circuit breaker suitable for inductive load of single poles and neutral in the existing MCB DB complete with connections, testing and commissioning etc,as required . |
| 71 | Supply and fixing 5 A to 32 A Singlepolerating, 240/415V,10KA \"C\" curve, miniature circuit breaker suitable for inductive load of single poles and neutral in the existing MCB DB complete with connections, testing and commissioning etc,as required . |
| 72 | Supply and fixing 20A,240 V,SPN Industrial type socket outlet with 2 pole and earth, metal encloser plug top alongwith 20A \"C\" curve SP,MCB in sheet steel enclosure ,on surface or in recess, with chained metal cover for socket out let and complete with connections, testing and commissioning etc. as required.(For GYSER) |
| 73 | Supply and fixing of Dimmable Led Recessed mounted 600*600 mm Luminaire having power consumption not more than 30W (2x2 suitable for false ceiling grid type) and light output not less than 3600 Lumens with System efficacy> 120 Lumen/Watt . Luminaire Housing Shall be made from single piece CRCA body without welding to avoid rusting and Polystyrene diffuser to reduce glare. The Luminaire should be having minimum 50000 Burning hours(L70B50) with CRI =80, SDCM<5 and Co-related color temperature (CCT) of 6500K.The luminaire shall be flicker free with a ripple content less than 5 % .The Driver must be having a RF module to communicate with other luminaire /Sensor/Switch .The luminaire must have 4KV surge protection integrated in driver, PF=0.95, Total harmonic distortion THD=10%,EMI/EMC Compliant and Operating voltage range 140-270V with High voltage cutoff@325 ± 15V with Auto restart feature. Luminaire and driver shall be separately BIS approved of same make equivalent to Philips/Osram/Crompton. LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted for approval |
| 74 | Supply and fixing of Exhaust Fan Sweep 250mm ,55Watt ventilator PVC Exhaust fan international designwith back auto shutters to prevent dust from outsidehavingresin body & three blades, rated voltage:220v-240Ac , 50Hz , Air Delivery rate@ 210 cmm & IPX0 degree of protection including connection up with three core flexible conductor of suitable size from ceiling rose to exhaust fan including cutting of existing wall for installation 250 mm sweep exhaust fan and making good the disturbed surface matching with the existing walls if required.. |
| 75 | Supply and fixing electric water heater, storage type Non Metallic Outer body to ensure shock free & safe operation, rust free & glossy finish outer cabinet for enhanced life cycle, glass lined incoloy heating element for faster heating ,vertical version of mounting with working pressure 8kg/cm2and heating element upto 2 KW capacity 25 litre, body width :38cm, body height : 60cmBEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. Model : LLSTV-25 ,Make: Luker or equivalent make of Havells/Jauguar/Philips. |
| 76 | Supply and fixing single pole blanking plate in existing MCB DB complete etc. as required |
| 77 | M & L for point wiring complete as specified with 1100 Vgrade with 1.5 Sqmm single core PVC insulated and unsheathed FRLS cable, copper conductor multistrandedpassing through including heavy duty PVC casing caping /Existing concealed /surface conduitwith all accessories surface type on wall/roof/floor/with MS box concealed with laminated top cover / surface PVC box with duly earthed with 1.5 sq mm PVC insulated and unsheathed FRLS cable, multistranded copper conductor cable as earth wireone light point controlled byone switch all asspecified and as directed by the Engineer - In - Charge. |
| 78 | S&F switch piano, flush type, 6 amp, single pole, 230 volts grade, one way. |
| 79 | Supply and fixing LED light fittingalong with tube rod 1X20W,230V Ac surface and wall mounted LED batten with aluminium housing enhance safety, High quality PC Diffuser, Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design as directed by Engineer in Charge. Make Crompton. Cat Part No CCS-103-20-30/40/65-SL-DP-NWH. |
| 80 | Supply and fixing LED light fitting along with tube rod1X10W,230 V Ac surface and wall mounted LED batten comprises of extruded channel, High quality PC Diffuser, Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design as directed by Engineer in Charge. Make Crompton, Cat Part No-CCS-103-10-30/40/65-SL-DP-NWH. |
| 81 | S&F hylum sheet suitable size alongwith replacement of switches and sockets as required at site including disconnecting of electrical connection from the existing board and reconnecting the same on its original position and directed by Engineer-in-Charge. |
| 82 | Dismantling and taking down ceiling fan /Exhaust fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying ,repairing fan motor and re fixing the same in position, connecting and testingall as specified and directed. |
| 83 | Supply and install hi wall split units indoor/ Outdoorof 1.5 TR Capacity with cordless remote control unit and inbuilt air ionizer for better air quality with minimum 3 star rating and EER 3.2 of capacity as shown and suitable for operating on AC, SP,230V, 50Hzwith proper connection without damaging the interior of walls at specified locations in the buildings. |
| 84 | Supply and fixing of wall mounted cabinet design voltage stablizer capacity 4 KVA for1.5 ton split AC having Intelligent time Delay System, low & high voltage cut off protection ,latest IC Technology ,and built in thermal overload protection all as specified and directed. |
| 85 | Supply and fix sheet metal enclosure 240v 20 Amp single pole and earth withtwo pinand earth plug and socket complete with one single pole MCB 20Amp SP all as directed. Make : Legrand/Indoasian/Havells |
| 86 | Taking down carefully Split/WindowAC of any make/type having capacity 1/1.5/2 TR for servicing, cleaning properly with chemical substance at site with replacing the defective parts as required for the office /OTM accommodation at DSD kochi, and refixing the same on its original position all as directed by Engrs-in-charge.(Only minor repair/replacements of parts can be carried out) |
