|
| 1 | 5MP Network IR Varifocal Bullet Camera with all OEM accessories |
| 2 | 5MP 30xIR Wiper PTZ Camera with all OEM accessories |
| 3 | PTZ Camera wall mount and wall mount base (should be from the same camera OEM |
| 4 | Bullet camera pole mount (should be from the same camera OEM) |
| 5 | 32 Channel NVR (8 sata) |
| 6 | 10 TB Surveillamce Hard disk |
| 7 | 8 port POE Switch with 2 sfp slots |
| 8 | 24 port Gigabit Switch |
| 9 | Media convertor |
| 10 | 6F LIU |
| 11 | High End PC |
| 12 | 9U Wall Mount Rack - Indoor |
| 13 | 6U Wall Mount Rack - Outdoor |
| 14 | 2KWA Online ups with Battery for 1 hour back up (marine standard) |
| 15 | ip56 rated Enclosure for housing 2kva online ups and battery |
| 16 | 43\"\" T.V |
| 17 | 3C*2.5 Sq mm Un-armoured power cable |
| 18 | 3C*1.5 Sq mm Un-armourd power cable |
| 19 | 1C*1.5 Sq mm Un-armoured power cable |
| 20 | 6 F OFC |
| 21 | Cat6 Cable |
| 22 | HDPE Pipe |
| 23 | 70 mm to 130 mm Octagonal GI POLE-6M |
| 24 | pvc conduit |
| 25 | Surge protector with (6*6) weather proof pvc box (19 nos0 and jb with clamp (5 nos) for housing surge protector |
| 26 | Lightning Protection for Pole |
| 27 | Rack Earthing |
| 28 | Fixed /PTZ Camera Clamp |
| 29 | Electrical and project accessories, Electrical accessories (marine standard) 8 way DB-2 Nos, ELCB-2, 16a MCB-3, 10 A MCB-5, Isolater-2, 3 modular PVC Box with 6ASwitch and socket-10 Nos etc. Project Accessories like HDMI able (10 mtrs)-1 nos, wireless mouse -1 nos, Tiltable T.V. stand-1 nos, sc-sc pigtails and patch chords (1 lot) |
| 30 | Fixing ermination and focusing of cameras on wall/Pole using marine standard corrosion free nut and bolt or fishers, screws and all other accessories under the scope of supplier (installation) |
| 31 | Fixing of PTZ camera wall mount & wall mount base on wall using Marine Standard- Corrosion free Nut & Bolt or Fishers, screws and all other accessories under the scope of supplier(installation) |
| 32 | Fixing of bullet camera pole mount & pole mount base on Pole using Marine Standard- Corrosion free Nut & Bolt or Fishers, screws and all other accessories under the scope of supplier(installation) |
| 33 | Fixing & Neat Installation of 32channel NVR on rack .(installation) |
| 34 | Fixing & Neat Installation of 8 port poe switch on rack.(installation) |
| 35 | Fixing & Neat Installation of 24 port GB switch on rack.(installation) |
| 36 | Fixing & Neat Installation of Media Convertor on rack.(installation) |
| 37 | Fixing & Neat Installation of Fully Loaded 6F LIU on rack .(installation) |
| 38 | Fixing & Neat installation of High End PC(installation) |
| 39 | Fixing and neat installation of 9U Equipment Rack(installation) |
| 40 | Fixing and neat installation of 6U Wall Mount Rack(installation) |
| 41 | Neat installation of 2KVA Ups with batteries inside ip 56 rated enclosure(installation) |
| 42 | Fixing of ip56 Floor mount Racks on Concrete foundation with minimum height of 300mm from ground(installation) |
| 43 | Fixing of 32 \" Monitor on Wall using tiltable TV Stand(installation) |
| 44 | Laying of ISI Marked 32mm HDPE pipe through wall , trench & Pulling of multiple cables( 3x 2.5Sqmm Power Cable & cat 5e cable& OFC etc) as required by the site condition through the HDPE(installation) |
| 45 | Fixing of 70mm to 130mm Octagonal GI POLE - 6 M on concrete wharf / soil as per the OEM standard(installation) |
| 46 | Laying of ISI Marked 25mm PVC conduit (ivory) through wall & Pulling of multiple cables( 3x 2.5Sqmm Power Cable & cat 5e cable& OFC etc) as required by the site condition through the PVC(installation) |
| 47 | Fixing & Neat termination of Surge Protector inside 6*6 weather proof pvc box (19nos) / jb with clamp(5 nos) for housing surge protector(installation) |
| 48 | Neat installation of Lightning Arrestor on pole as per the OEM Standard (installation) |
| 49 | Fixing of Rack earthing Kit with necessary accessories,Installation of Normal Pipe earthing. Copper 8swg -1.5 Mtrs, 1.5 inch GI pipe - 2 Mtrs, Chemical earthing compound(installation) |
| 50 | Fixing of fixed / PTZ Camera Clamp (make :- stainless steel) as per the site condition.(installation) |
| 51 | Concrete cutting should be done as per the site requirement with a minimum depth of 50 cm and as per the pwd standards which include Concrete wharf and refilling the trench with concrete after laying HDPE/PVC/GI pipe. RCC route marker under the scope of contractor(installation) |
| 52 | Splicing with including all accessories like pigtails, patch cord etc. (installation) |
| 53 | Testing and commissioning charges (installation) |
