Grama Panchayat has published Tender For Purchase Of Materials For Construction Of Anganwadi In Ward 10 Uzhavoor Grama Panchayat. Submission Date for this Tender is 22-02-2024. Building Work Tenders in uzhavoor Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Uzhavoor Grama Panchayat - Anganwadi Construction - Ward 10 |
2 | Stone Aggregate(single size): 40 mm nominal size |
3 | Stone Aggregate(single size):20 mm nominal size |
4 | Coarse sand (zone III) |
5 | Portland Cement |
6 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
7 | Vibrator (Needle type 40 mm) |
8 | Sundries |
9 | Stone for masonry work |
10 | Through and bond stone size 24 x 24 x 39cm |
11 | Stone Aggregate(single size): 10 mm nominal size |
12 | Royalty for good earth |
13 | Solid blocks of size 30x20x20cm |
14 | Solid blocks of size 40x20x10cm |
15 | Solid blocks of size 40x20x20cm |
16 | Structural steel such as tees, angles, channels and R.S. joists |
17 | Red oxide Zinc chromate primer |
18 | Adjustable span ESO+SI (2.35-3.40) |
19 | Adjustable telescopic prop 3 m (2.02-3.75m) |
20 | Beam clamp 300-380 mm (450-1070 mm) |
21 | Wall form panel 1250x450xmm |
22 | Corner angle 45x45x5 mm 2.50 long |
23 | Column clamp 450x1070 mm |
24 | Prop 2 m (2-3.5m) |
25 | Twisted steel/deformed bars |
26 | Fine sand (zone IV) |
27 | Mild steel tubes hot finished welded type |
28 | Welding by electric plant |
29 | Epoxy paint |
30 | Galvanised steel corrugated sheets |
31 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
32 | Galvanised steel J or L hooks 8 mm dia |
33 | G.I Limpet washer |
34 | Bitumen washer |
35 | Roofing paint for iron sheets in red colour |
36 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
37 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
38 | Anjili wood scantls |
39 | Second class teak wood in planks |
40 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
41 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
42 | Bright finished or black enameled mild steel screws 40 mm |
43 | Bright finished or black enameled mild steel screws 20 mm |
44 | Mild Steel round bar above 12 mm dia |
45 | Flats up to 10 mm in thickness |
46 | Anjili wood planks |
47 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
48 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
49 | Acrylic exterior paint |
50 | Exterior primer |
51 | Multi surface paint |
52 | Special primer (C.W) |
53 | Plastic emulsion paint |
54 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
55 | C.I. bracket for wash basin and sinks |
56 | Vitreous China orrisa type w.c. pan size 580 mm |
57 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
58 | 100 mm S.C.I. trap with vent heel |
59 | Vitreous china flat back wash basin 550x400 mm |
60 | 15 mm C.P.brass tap |
61 | C.P. brass waste 32 mm |
62 | PTMT - Towel Rail (600 mm) |
63 | Second class teak wood in scantling |
64 | Chromium plated Brass screws 25 mm |
65 | PVC pipe 25 mm outer dia. 10kgf cm2 |
66 | PVC pipe 32 mm outer dia 6Kgf/cm2 |
67 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
68 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
69 | PVC vent cowl 63 mm dia |
70 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
71 | Hard board 6 mm thick |
72 | Rawl plug 50 mm (designation 10 nos) |
73 | PVC pipe 50 mm outer dia.6kgf/cm2 |
74 | PVC door Elbow 63 mm dia |
75 | PVC Elbow 110 mm dia |
76 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
77 | Oxidised mild steel screws 30 mm |
78 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
79 | S.W. gully trap type 100x100 mm |
80 | C.I. Grating 100x100 mm |
81 | C.I. Cover and frame 300X300 mm inside |
82 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
83 | PVC 45 degree Elbow 110 mm dia |
84 | PVC bend 110 mm dia |
85 | PVC Tee 110x110x110mm dia |
86 | PVC vent cowl 110 mm dia |
87 | PVC end cap 110 mm dia |
88 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
89 | Stone Aggregate(single size): 06 mm nominal size |
90 | Interlocking C.C. paver block (60 mm thick, M-30) |
91 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
92 | Wire nails |
93 | G.I pipes 50 mm dia |
94 | G.I. pipes 40 mm dia |
95 | Synthetic enamel paint in black or chocolate shade |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail