|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 2 | Dismantling walll and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets/AC boards, any thickness, including cover fillets complete all as specified and directed. |
| 3 | S&F of decorative type mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid, the tile should have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 Part 6 &7) in module size of 600 x 600 x 16mm with Bio block coating on the face of the tile, impact resistant and suitale for green bldg appliation, eith recycled content of 63%.The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junctionThe Tsections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test all as per manufacturer\"s instructions complete all as specified and as directed.Make : Armstrong, saint Gobain or equivalent make as approved. |
| 4 | Dismantling floor, hearth or wall tiling/ chequered tile/ interlocking tile including cement mortal bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed. |
| 5 | M&L 25 mm thick Cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 6 | M&L double charge vitrified light coloured ceramic tiles 10mm thick (square / regtangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc set and joineted in neat cement slurry and pointed in white or colour cement to match over with and including 15mm thick screed bed in CM 1:6complete all as specified and as directed. |
| 7 | M&L machine cut Granite slab (of any type) 18 to 20 mm thick as in walls, floor, steps, pillars,window cills, parapit tops and like with and including 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, with araldite adhesives set and jointed with white cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed. Note: (i)The rate of granite stone shall deemed to be included for full rounded off corner/edges incl all cutting to make it square or rectangular.(ii) The rate shall also deemed to be included for cutting, grinding and polishing to achive the desired granite finish complete all as specified and directed. |
| 8 | M&L for 75mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base or simillar works surface finished even & rough to receive floor topping complete all as specified and directed. |
| 9 | S&F Non skid designed parking tiles coloured 9-10mm thickness (square / rectangular), area of each tile exc 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry & pointed in white or coloured cement to match with and over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | M&L for 3mm thick aluminium composite panelling of any colour and any shape including necessary GI frame work required for fixing of panelling on wall / coloumns / plastered surface / concrete surface including scaffolding required for fixing work and safety measures all as directed.Note : Joint of compoiste panelling work should be filled with braker rod and silicon weather seal and cost thereof shall deemed to be included in quoted rate. |
| 11 | Excavating in post holes in any type of soil ( or similar hoels ) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr. complete all as specified and as directed. |
| 12 | M&L cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 13 | M&L rolled mild steel in plates, girder,channels square cut or notched (ordinary and colour sunk) forming holes, without any attachment conf to Fe 410-W (Gde E-250) quality \"A\" all as specified and as directed. |
| 14 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed. |
| 15 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and directed. |
| 16 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 17 | Surface dressing not exc 15 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 18 | M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed. |
| 19 | M&L for hardcore (Broken boulder) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 20 | M & L for machine made Rubber moulded precast conctete interlocking paver block (coloured), Glossy finish pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed. |
| 21 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 22 | M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed. |
| 23 | M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with approved water proofing compound @ 3% by weight of cement and applying two coats ofRoff Hyguard EX Rezone Chemicals or of equivalent approved make complete all as specified and as directed. |
| 24 | M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided forall as specified and as directed . |
| 26 | M&L for 40mm thick PCC 1:2:4 type B-1( using 20mm gradedstone aggregate ) as in flooring finished even and smooth with using extra cement complete all as specified and directed . |
| 27 | Material and labour for coloured non skid ceramic tilesof size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles with & over including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 28 | M&L for coloured glazed ceramictiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles with & over including 10mm thick screed bedin cement mortar 1:3 complete all as specified & directed. |
| 29 | M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles with and over and including 10mm thick screed bedin cement mortar 1:3 etc complete all as specified & as directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from frame)area not exc.1.5 sqm each complete all as directed. |
| 31 | S & F factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per manufacturer\"s instructions including fittings complete all as specified and as directed. |
| 32 | Supply and fix solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and complete all as specified and as directed. |
| 33 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm eachcomplete all as specified and as directed. |
| 34 | Supply and fix aluminium powder coated louvered ventilator using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 35 | S & F 250 mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked,complete all as specified and as directed. |
| 36 | S & F 200mm long aluminium anodised, barrel tower bolts of extruded section,complete all as specified and as directed. |
| 37 | Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed. |
| 38 | S&F vitreous China wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, including CP jet spray, fixing bolts,,10 ltrs PVC valveless syphonic action type low level flushing cistern with inlet , ball valve, float & handle and flush pipe and connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., completeall as specified and directed. |
| 39 | S&F table top Wash hand basin, vitreous China coloured flat back of size 540mm x 360mm x 115mm to 150mm mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type swan neck pillar taps, cast copper alloy chromium plated fancy type fixed complete all as specified and directed. |
| 40 | S&F Vitreous china Urinal, full stall type, white withwaste pipe and CP brass spreader complete including providing andfixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified & as directed. |
| 41 | S&F 600 mm x450 mm beveiled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers as in repairs complete all as specified and directed. |
| 42 | S & F in chromium plated faucet health (hand jet) 15mm bore with fittings, and including two way bib tap and accessories complete all as specified and directed. |
| 43 | S & F stainless steel grating doom 125mm dia complete all as specified. |
| 44 | S&F Chromium Plated Toilet Paper Holder Complete all as specified and as directed |
| 45 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws,complete all as specified and directed. |
| 46 | S&F rolled mild steel in joist, channels, angles or tee sections, fixed, post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality \"B\" complete all as specified and directed. |
| 47 | M & L for 12 mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed. |
| 48 | M&L 2nd class hard wood as in plain fillets square, clean sawn exc. 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed. |
| 49 | M & L for 9 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directd |
| 50 | Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and as directed. |
| 51 | M&Lfor rendering 15 mm thick plaster in CM (1:4) on wallfair surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 52 | S&F1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 53 | S & Ffor 15mm dia CP angle cock of make Prayag or equivalentcomplete all as specified and as directed. |
| 54 | S & F for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed |
| 55 | S&F 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 56 | S&Ffor 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to wall or floor etc using synthetic rubber adhesive cement solventcompleteall as specified and directed . |
| 57 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to wall or floor etc using synthetic rubber adhesive cement solventcompleteall as specified and directed . |
| 58 | S&Ffor Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mmincluding bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 59 | S&F for 75mm dia PVC (SWR) bends any radiuscompleteall as specified and directed |
| 60 | S&F for 110 mm dia PVC (SWR) bends any radiuscompleteall as specified and directed |
| 61 | S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement complete all as specified & as directed. |
| 62 | S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement complete all as specified & as directed. |
| 63 | S&F for 110mm dia PVC (SWR) vent cowl completeall as specified and directed. |
| 64 | S&F for 75mm dia PVC (SWR) vent cowl completeall as specified and directed. |
| 65 | S&F for 75mm dia PVC (SWR) junction single(single T) completeall as specified and directed |
| 66 | M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement outlet dia 75mm in repair completeall as specified and directed. |
| 67 | S&F soap dish any type fixed type fixed to plugs with chromium plated brass screws completeall as specified and directed. |
| 68 | Taking down 15mm bore steel water tubing and connections complete all as specified and directed. |
| 69 | S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 70 | Taking down 20mm bore steel water tubing and connections complete all as specified and directed. |
| 71 | S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 72 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified & as directed. |
| 73 | M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubingand making good complete all as directed by Engr-in-Charge. |
| 74 | S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed. |
| 75 | S&F stainless steel chromium plated 6 Pin, 45 cm to 60 cm long hanger fixed to wall with screws complete all as specified and as directed. |
| 76 | Excavation in trenches, n.exc 1.50m wide and 1.50 m in depth for foundation of walls, cesspits, manholes, etc 10 sqm on plan and getting out in hard dense soil, etc complete all as specified and directed. |
| 77 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 78 | M&L for precast cement concrete solid block masonry work in PCC 1:3:6 type C-1, with using 20mm grated stone aggregate, exc. 10cm in width and setting in cm 1:6, etc complete all as specified and directed. |
| 79 | Removal of excavated material to a distance exc 250 mtr but n.exc 500 mtr and depositing where directed complete all as specified and directed. |
| 80 | S&F for rolled MS work as in wind tiles for roofs confirming to Fe-290 W Gde-E-165 complete all as specified and directed. |
| 81 | S&F Pre painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/ridges/valley gutters/ cladding to wall etc fixed with self taping screws as specified and directed. |
