Tender For Construction Of New Gestrology And Entrology Division At Third Floor S.G.M.H. Rewa, rewa-Madhya Pradesh

Tender For Construction Of New Gestrology And Entrology Division At Third Floor S.G.M.H. Rewa- 1 Demolishing brick work manually/ by mechanical means including stacking ofserviceable material and disposal ofunserviceable material within 50 metres leadas per direction of Engineer-in- Charge.15.6.3 n cement mortar. 2 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.15.11.1 For thickness of tiles 10 mm to25 mm. 3 Brick work with well burnt 40kg chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete.6.2.2 Cement mortar 1:6 (1 cement : 6sand) 4 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 5 12 mm cement plaster of mix :13.1.1 1:4 (1 cement : 4 sand) 6 15 mm cement plaster on the rough side of single or half brick wall of mix13.2.1 1:4 (1 cement : 4 sand) 7 Providing and laying vitrified floor tilesMulti/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approvedmake in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.79.2 In dark shade glossy/rustic/stain finished11.79.2.3 (c) Size 800X1200 mm thickness 11-12mm 8 Providing and applying white cementbased putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission ofAPD/Chief Engineer will be required. 9 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, havingVOC (Volatile Organic Compound)content less than 50 grams/ litre. ofapproved brand and manufacture, including applying additional coatswherever required to achieve even shade 10 Painting with acid proof paint of approved brand and manufacture ofrequired colour to give an even shade:Two or more coats on new work. 11 Providing and fixing perforated Aluminium panel ceiling of white/natural satin colour supplied by approved manufacturers consisting ofpanel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics.Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature, one sidewith a full primer and finish coat the other side (inner side) with a primer coating and Skin Coat on a continuous paint line. The panel shall be perforated Aluminium panel having perforation of 2mm diameter at a distance of 5mm centre to centre. Non-woven textile (NWT) made of glass-reinforced fibre glued over the perforation at the back side of the panel for sound absorption to provide noise reduction co efficient upto 0.7 NRc. The Panels shall abut each other with a narrow V grove. Panel shall be clipped to a baked enamelled aluminium panel carrier of respective size in standard length of 5 mtr made with cut outs to hold the panels in a module of 300mm closed at a distance of 1.4 mtr. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actualdrawing and sitecondition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc.of doubled baked black enamelled aluminium alloy AA 5050 (Al. Mg) 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin forepoxy is to be of floor grade type i/cappropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals)11.67.33 mm thick 13 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providingand fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangementand making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 14 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete .25.4.4Anti germ Fluoro-Polymer Coated couple water closet Size 375X650X800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 15 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 16 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 17 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron andchrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 18 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 19 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with MetallicBottle.(Premium Range) 20 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 21 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300m i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete .25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 550x400x200 mm. (Premium Range) 22 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long.(Premium Range) 23 Providing and fixing bevelled edge mirror of superior glass (of approvedquality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plainand brass threaded fittings. Thisincluded jointing of pipes and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of jointscomplete as per direction of Engineer-in- Charge. External Work 18.7.2 20 mm nominal outer dia.Pipes. 25 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.2 110 mm diameter 26 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion.17.59.4 Single tee without door 17.59.4.2 110x110x110 mm 27 Providing and fixing CP brass towelring of approved quality and make200mm dia ring

INR 2000 /-

INR 39960.0 /-

INR 19.98 Lakhs /-