|
| 1 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Making 25 cm (10\") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soil (vide classification of soil item A ) true to plumb and without eccentricity in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead including all lifts , all complete as per approved disign and direction of E/l. |
| 3 | 63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of oprationand disposal of the excavated earth up to 50 mts lead including all lifts , all complete as per approved design and direction of (E/l) |
| 4 | Earth work in rough excavation , banking excavated earth in layer not exceeding 20 cm in depth , breaking clods watering , rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks , marginal banks and guide banks or filling up ground depressions. lead upto 50 m and lift upto 1.5 m. All Kinds of soil |
| 5 | Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. |
| 6 | Providing designation 100 A one brick on flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, |
| 7 | Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:- 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size ) |
| 9 | Providing and laying in position specified grade of reinforced cement concreteexluding the cost of centring and shuttering-all work upto plinth level:- 1:1.5:3 (1 Cement : 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size ) |
| 10 | \"Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)\" |
| 11 | Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). |
| 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete:- Thermo-Mechanically Treated bars TMTC-500-10mm dia |
| 13 | Centring and shuttering including strutting,propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete |
| 14 | \"Centring and shuttering including strutting,propping etc. and removal of form for:Suspended floors, roots, landings, balcnies and access platform\" |
| 15 | \"Centring and shuttering including strutting,propping etc. and removal of form for:Lintels, beams, plinth bams, griders, bressumers and contilevers. \" |
| 16 | \"Centring and shuttering including strutting,propping etc. and removal of form for:Columns,Pillars, Piers, Abutments, Posts and Struts \" |
| 17 | \"Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) \" |
| 18 | Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum |
| 19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc. |
| 20 | \"Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.\" |
| 21 | \"Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate\" |
| 22 | Providing and fixing M.S fan clamp type 1 of 16mm dia M.S. Bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop all as per standard design complete. |
| 23 | Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement:- 18mm thick |
| 24 | Cement plaster in course sand, 12 mm cement plaster of mix:1:6 (1 cement: 6 coarse sand) |
| 25 | \"15 mm cement plaster on rough side of single or half brick wall of mix. 1:6(1 cement: 6 coarse sand)\" |
| 26 | 6 mm cement plaster to ceiling of mix1:4 (1 cement:4 coarse sand) |
| 27 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | Applying one coat of cement primer of approved brand and manufacture on wall surface. Cement Primer |
| 29 | Wall painting with plastic emulsion paint of approved brand and manufacture and of required shade to give an even shade: Two or more coats on new work |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 31 | Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil |
| 32 | Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. |
| 33 | Providing designation 100 A one brick on flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, |
| 34 | Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:- 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size ) |
| 35 | Providing and laying in position specified grade of reinforced cement concreteexluding the cost of centring and shuttering-all work upto plinth level:- 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size ) |
| 36 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete:- Thermo-Mechanically Treated bars TMTC-500-10mm dia |
| 37 | Centring and shuttering including strutting,propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 38 | \"Centring and shuttering including strutting,propping etc. and removal of form for:Suspended floors, roots, landings, balcnies and access platform\" |
| 39 | Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand ) |
| 40 | 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm |
| 41 | Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend |
| 42 | Providing & fixing white vitreous china water closet squatting pan (indian type),Orissa pattern W.C. pan of size 580x440 mm |
| 43 | Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110mm diameter |
| 44 | Providing & fixing ISI Mark India mark II hand pump with 8 Nos. Connection rod and 01 cylinder conforming to IS 15500 (Part 1-8)/2008 |
| 45 | Providing & fixingISI Mark 125mm dia. UPVC casing pipe conforming to IS 12818-1983/1992 |
| 46 | Providing & fixing ISI Mark 32mm dia. GI pipe medium quality (3mtr each length) conforming to IS 1239 (Part 1-4) |
| 47 | Providing & fixing ISI Marked 40mm dia. best quality UPVC pipe conforming to IS 12818-1983/1992 |
| 48 | Providing & fixing ISI Marked 40mm dia. x 2 mtr long UPVC RIBBED Strainer conforming to IS 12818-1983/1992 |
| 49 | Providing & fixing 125mm x 40mm UPVC reducing socket (Heavy Quality) |
| 50 | Supply all abour and materials and fitting &fixing GI cap on new tube well |
| 51 | Providing all material labor tools and construction of 1.85m dia circular PCC (1:2:4) UNICEF design platform with foot rest as per drawing complete |
| 52 | Boring by Jet or dheki by suitable cutter or reducer as the case may be lowering 125mm UPVC x 40mm dia. UPVC pipe & strainer of standard quality iron shoe plug socket etc. all complete including providing all tools and plants required for the job as per specification and direction of Engineer-in-charge. for 125mm dia. UPVC pipe |
| 53 | Boring by Jet or dheki by suitable cutter or reducer as the case may be lowering 125mm UPVC x 40mm dia. UPVC pipe & strainer of standard quality iron shoe plug socket etc. all complete including providing all tools and plants required for the job as per specification and direction of Engineer-in-charge for 40mm dia. UPVC pipe |
| 54 | Boring by Jet or dheki by suitable cutter or reducer as the case may be lowering 125mm UPVC x 40mm dia. UPVC pipe & strainer of standard quality iron shoe plug socket etc. all complete including providing all tools and plants required for the job as per specification and direction of Engineer-in-charge for 40mm dia. UPVC pipe |
| 55 | Supply labour and developing the tube well to have sand free discharge all complte as per direction of E/I |
| 56 | Transportation of all materials & tools from store to work site and carrying back the surplus materials if any |
| 57 | Carriage of Local sand/ brick bats including loading & unloading and Haulage |
| 58 | Carriage of Sone (Yellow) sand including loading & unloadingand Haulage |
| 59 | Carriage of Stone chips including loading & unloadingand Haulage |
| 60 | Carriage of Cement including loading & unloadingand Haulage |
| 61 | Carriage of Steelincluding loading & unloadingand Haulage |
| 62 | Carriage of Bricks including loading & unloadingand Haulage |
