Military Engineer Services-MES has published Tender For Repair/Maintenance Of Water Supply Pipe Lines And Repair/Maint Of Fire Fighting System At Metcalfe House And Repair/Maint Of Fire Alarm/Detention System And Allied Work At Jcb Under Ge I Rnd Delhi. Submission Date for this Tender is 07-03-2024. Fire Fighting Consumable Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-03-2024 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr depth and not exceeding 1.5 Mtr in width and getting out completeall as specified and directed. |
| 2 | All as per item No. 1.00 above but in hard/dense soil/cutting of road/hard standing etc, complete all as specified and directed. |
| 3 | Returning,filling in and including spreading, leveling, watering and well ramming in layers not exceeding 25 cm to achieve desired compactness complete all as specified and directed. |
| 4 | Removing surplus soil to a distance exceeding 1.5Km but not exc. 5 KM and depositing where directed at a leveln. exc 1.5 M above the starting point complete all as specified and directed. |
| 5 | M&L for Brick work in CM (1:4) with sub class "B" bricks straight or curved on plan above ground level and not exceeding 1.5mtr in height from ground level including demolition of old unserviceable brick work complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate)in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed. |
| 7 | M&L for PCC 1:4:8 Type D2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 8 | M&L for rendering 10 mm thick on brick work/concrete surface in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and directed. |
| 9 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 15mm bore including taking down old unserviceable complete all as specified and directed. |
| 10 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 20 mm bore including taking down old unserviceable complete all as specified and directed. |
| 11 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 25 mm bore including taking down old unserviceable complete all as specified and directed. |
| 12 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 40 mm bore including taking down old unserviceable complete all as specified and directed. |
| 13 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 50 mm bore including taking down old unserviceable complete all as specified and directed. |
| 14 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/ wall/ floor of sizes 80 mm bore including taking down old unserviceable complete all as specified and directed. |
| 15 | Supply and laying GI pipe medium grade ISI marked including all fittings in old position in trenches/wall/ floor as directedof sizes 100 mm boreincluding taking down old unserviceable complete all as specified and directed. |
| 16 | Supplying, Laying, jointing, testing and commissioning in replacement of old unserviceableDI Pipe of 150 mm bore size, with spigot and socketed ends centrifugally castClass K-7 Push on joint confirming to IS 8329laid in trenches complete all as specified and directed. |
| 17 | M&L in replacement of old unserviceable DI fittings for spigot/socket pipes such as bends of any radius and angle, collars, tapers, tail pieces, Tee pieces, Caps and plugs suitable upto 150 mm bore dia all socketed or socket and spigot or side flanged complete all as specified and directed. |
| 18 | M&L for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 700 grams new lead for CI pipe of 150mm bore pipes complete all as specified and directed. |
| 19 | M&L for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 500 grams new lead for CI pipe of 100mm bore pipes complete all as specified and directed. |
| 20 | M&L for burning out lead joint in any position including removing old lead joint and making new lead joint by using the retrived lead and adding minimum 400 grams new lead for CI pipe of 80mm bore pipes complete all as specified and directed. |
| 21 | Material and labour for Rubber Gasket Joint (tyton joint)including jointingmaterial for DI/CI pipe of size 150 mm bore dia and taking out old unserviceable complete all as specified and directed. |
| 22 | Supplying, laying, jointing, testing in replacement of old unserviceable MS pipe,of dia 80 mm Heavy duty class"C" confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately. |
| 23 | Supplying, laying jointing, testing in replacement of old unserviceable MS pipe,of dia 100 mm Heavy duty class"C" confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately. |
| 24 | Supplying, laying jointing, testing in replacement of old unserviceable MS pipe,of dia 150 mm Heavy duty class"C" confirming to IS - 1239, laid in trenches or laying on floors for connections to centrifugal pump sets for suction, pump to header and to connected out-going water mains, complete all as specified and directed. Note : Welded flanges will be measured and paid seperately. |
| 25 | Supply and fixing welded to flanges on ends for MS pipe of dia 80 mm,flange not less than 15mm thick complete all as specified and directed. |
| 26 | Supply and fixing welded to flanges on ends for MS pipe of dia 100 mm,flange not less than 15mm thick complete all as specified and directed. |
| 27 | Supply and fixing welded to flanges on ends for MS pipe of dia 150 mm,flange not less than 15mm thick complete as specified and directed. |
| 28 | M&L Joints with rubber or fibre board gasket of sizes 80 mm complete with nut,bolt and double washers complete as specified and directed. |
| 29 | M&L Joints with rubber or fibre board gasket of sizes 100 mmcomplete with nut,bolt and double washers complete as specified and directed. |
| 30 | Supply & Fixing in replacement cast iron Sluice Valveof dia 50 mm ISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top with nuts, bolts, washers and gaskets complete all as specified and directed. |
| 31 | Supply & Fixing in replacement cast iron Sluice Valveof dia 80 mm ISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top with nuts, bolts, washers and gaskets complete all as specified and directed. |
| 32 | Supply & Fixing in replacement cast iron Sluice Valveof dia 100 mm ISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top with nuts, bolts, washers and gaskets complete all as specified and directed. |
| 33 | Supply & Fixing , in replacement cast iron Sluice Valveof dia 150 mm ISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top with nuts, bolts, washers and gaskets complete all as specified and directed. |
| 34 | Supply & Fixing , in replacement cast iron Sluice Valveof dia 200 mm ISI marked(PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top with nuts, bolts, washers and gaskets complete all as specified and directed. |
| 35 | Supply and fixingin replacement CI Non return Valve of dia 50 mmwith GM seat, PN-1.0 ISI marked, includingflange joints such as packing, nut and boltsetc complete all as specified and directed. |
| 36 | Supply and fixingin replacement CI Non return Valve of dia 80 mmwith GM seat, PN-1.0 ISI marked, includingflange joints such as packing, nut and bolts etc complete all as specified and directed. |
| 37 | Supply and fixingin replacement CI Non return Valve of dia 100 mmwith GM seat, PN-1.0 ISI marked, includingflange joints such as packing, nut and bolts etc complete all as specified and directed. |
| 38 | Supply and fixing in replacement CI Non return Valve of dia 150 mmwith GM seat, PN-1.0 ISI marked, includingflange joints such as packing, nut and bolts etc complete all as specified and directed. |
| 39 | Supply and fixing in replacement CI Non return Valve of dia 200 mmwith GM seat, PN-1.0 ISI marked, includingflange joints such as packing, nut and bolts etc complete all as specified and directed. |
| 40 | Supply and fixingin replacement foot valve flanged type of dia 80 mm with strainer confirming to IS:4038 with flanged ends complete all as specified and directed. |
| 41 | Supply and fixingin replacementfoot valve flanged type of dia 100 mm with strainer confirming to IS:4038 with flanged ends complete all as specified and directed. |
| 42 | Supply and fixingin replacement foot valve flanged type of dia 150 mm with strainer confirming to IS:4038 with flanged ends complete all as specified and directed. |
| 43 | Labour only for cutting of existing CI / DI pipe of dia 80 mm for insertion of CI specials /valvesetc. all as required including dewatering of lekage water complete all as specified and directed. |
| 44 | Labour only for cutting of existing CI / DI pipe of dia 100 mm for insertion of CI specials /valvesetc. all as required including dewatering of leakage water complete all as specified and directed. |
| 45 | Labour only for cutting of existing CI / DI pipe of dia 150 mm for insertion of CI specials /valvesetc. all as required including dewatering of leakage water complete all as specified and directed. |
| 46 | S&F in repairFloat valve with epoxy coated aluminium rod and high density ballofsize 15 mm bore dia complete all as specified and directed. |
| 47 | S&F in repair Float valve with epoxy coated aluminium rod and high density ballofsize 20 mm bore dia complete all as specified and directed. |
| 48 | S&F in repair Float valve with epoxy coated aluminium rod and high density ballofsize 25 mm bore dia complete all as specified and directed. |
| 49 | S&F in repairFloat valve with epoxy coated aluminium rod and high density ballofsize 40 mm bore dia complete all as specified and directed. |
| 50 | S&F in repairFloat valve with epoxy coated aluminium rod and high density ballofsize 50 mm bore dia complete all as specified and directed. |
| 51 | S&F in repairgun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778 of size 15 mm bore dia complete all as specified and directed. |
| 52 | S&F in repairgun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778 of size 20 mm bore dia complete all as specified and directed. |
| 53 | S&F in repair gun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778 of size 25 mm bore dia complete all as specified and directed. |
| 54 | S&F in repair gun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778 of size 40 mm bore dia complete all as specified and directed. |
| 55 | S&F in repairgun metal gatevalve with iron wheel head screwedboth ends for iron pipe , ISI marked , as per IS : 778 of size 50 mm bore dia complete all as specified and directed. |
| 56 | S&F in replacement flanged water meter woltman type of dia 50 mm including gasket, nut,bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed. |
| 57 | S&F in replacement flanged water meter woltman type of dia 80 mm including gasket, nut,bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed. |
| 58 | S&F in replacement flanged water meter woltman type of dia 100 mm including gasket, nut,bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed. |
| 59 | S&F in replacement flanged water meter woltman type of dia 150 mmincluding gasket, nut,bolt & double washer as per IS 779, IS 6784, and ISO 4064 complete all as specified and directed. |
| 60 | Supply and fix in replacement Strainer Y type conforming to IS, size 80 mm (3”) dia complete all as specified and directed. |
| 61 | Supply and fixin replacement Strainer Y type conforming to IS, size 100 mm (4”) dia complete all as specified and directed. |
| 62 | Supply and fixin replacement Strainer Y type conforming to IS, size 150 mm (6”) dia complete all as specified and directed. |
| 63 | M&L for painting with two coats of synthetic enamelled paint over a coat of red oxide primer on new steel surfaces including preparation of surfacen.exc 10cm width or girth complete all as specified and directed. |
| 64 | M&L for mild steel work MS sheet, angle iron, flat iron etc including cutting, welding, dismantling old unserviceable MS work complete all as specified and directed. |
| 65 | S&F in replacement rotational moulded polythelene water storage tank (cylindrical vertical with closed top) triple layer of capacity 2000 ltrs hoisted & fixed in position complete all as specified and directed. |
| 66 | All as per item Ser No 65.00 above but 3000 ltrs, complete all as specified and directed. |
| 67 | All as per item Ser No 65.00 above but 5000 ltrs, complete all as specified and directed. |
| 68 | All as per item Ser No 65.00 above but 10000 ltrs, complete all as specified and directed. |
| 69 | Labour only for bocky system under path/road to pass the GI/CI/DI Pipes upto 150 mm dia manually as directed. |
| 70 | Supply and fixingin replacement 3 pole power contactor type ML-1.5, 415 Volts, 50 HZ range 25 Amps, complete all as specified and directed. |
| 71 | Supply and fixingin replacement 3 pole power contactor type ML-2, 32 Amps, 415 Volts, 50 HZ complete all as specified and directed. |
| 72 | Supply and fixingin replacement 3 pole power contactor type ML-3, 40 Amps, 415 Volts, 50 HZ complete all as specified and directed. |
| 73 | Supply and fixingin replacement 3 pole power contactor type ML-4, 70 Amps, 415 Volts, 50 HZ complete all as specified and directed. |
| 74 | Supply and fixingin replacement 3 pole power contactor type ML-6,110 Amps,415 Volts, 50 HZ complete all as specified and directed. |
| 75 | S & F in replacement of Bimetal over load relay type ML 1.5, starter type MNX, relay range 14-23 Amp, complete all as specified and directed. |
| 76 | S & F in replacement of Bimetal over load relay typeML 2, starter type MNX, relay range 20-32 Amps, complete all as specified and directed. |
| 77 | S & F in replacement of Bimetal over load relay typeML 3, starter type MNX, relay range 28-42 Amps, complete all as specified and directed. |
| 78 | S & F in replacement of Bimetal over load relay typeML 4/6, starter type MNX, relay range 45-75 Amps complete all as specified and directed. |
| 79 | S & F in replacement of Bimetal over load relay typeML 5, starter type MN, relay range 66-110 Amps CT operated complete all as specified and directed. |
| 80 | Supply and fixing in replacement PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, single core, 1100 volts complete all as specified and directed. |
| 81 | All as per item No 80 but copper conductor wire of size 4 Sqmm. |
| 82 | All as per item No 80 but copper conductor wire of size 6 Sqmm. |
| 83 | All as per item No 80 but copper conductor wire of size size 10 Sqmm. |
| 84 | All as per item No 80 but copper conductor wire of size16 Sqmm |
| 85 | All as per item No 80 but copper conductor wire of size 25 Sqmm |
| 86 | S&F in replacement3 Pole MCCB,250 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified & directed |
| 87 | S&F in replacement 3 Pole MCCB,400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified & directed |
| 88 | S&F in replacement3 Pole MCCB,630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA complete all as specified and directed. |
| 89 | S&F in replacement4 Pole MCCB,250 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and directed. |
| 90 | S&F in replacement4 Pole MCCB,400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified and directed. |
| 91 | Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.GI plate connected with galvanised iron wire 4mm dia by means of Copper nuts, bolts and washers. GI wire laid in 20mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a)GI wire 4 mm dia (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c)Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick plaster in cement mortar 1:6 including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar @75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. |
| 92 | Material and Labour for earthing complete with copper plate electrode 600mmx600mmx3.15mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.Copper plate connected with copper earth strip 20x3mm by means ofnuts, bolts and washers.Copper striplaid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) as shown in electrical plat No. 03 of SSR Part-I with following:- (a)Copper strip 20x3mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothlyfinished with 15mm thick plaster cement mortar 1:6 including RCC pit cover 25mm thick re-inforced with 8mm dia mild steel TMT bars @75mm centre to centre both ways with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. |
| 93 | M&L copper strip 20mmx3mm buried in ground including necessary excavation & earth work in soft/loose soil and removal of excavated material to a distance n.exc 50 mtrs and deposited where directed including taking out old unserviceablecomplette all as specified & directed. |
| 94 | Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed |
| 95 | Supply and laying in replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed |
| 96 | Supply and laying in replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95Sqmm 3.5 core including suitable size Aluminium lugs properly crimpled with crimping tools including testing complete all as specified and directed |
| 97 | Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and directed. Note : Punned thickness shall be measured. |
| 98 | Supply and laying in trenches burnt brick sub class "B" standard size for cable protection keeping width of the brick parallel to the length of the cable all as specified and directed. |
| 99 | M&L for Lead wool complete all as specified and directed. |
| 100 | M&L in repair of mild steel Nuts ,Bolts and Washers 25 to 150 mm long of 6 to 20 mm dia complete all as specified and directed. |
| 101 | M& L in repair of Gland dori complete all as specified and directed. |
| 102 | S&F in repair Digital ammeter of existing size 100mm (Square type) and connecting up complete all as specified and directed. |
| 103 | S&F in repairDigital Voltmeter of existing size 100mm (Square type) and connecting up complete all as specified and directed. |
| 104 | S&F in repairElectronic timer type ET-100, 9 to 30 sec, 415V suitable for star-delta/DOL starter upto 20 HP capacity complete all as specified and directed. |
| 105 | S&F in repairRelay of current range 10 to 16amps, 415 volts suitable for mounted on ML-1.5 and ML-3 Contactors complete all as specified and directed. |
| 106 | S&F in repairRelay of current range 28 to 42amps, 415 volts suitable for mounted on ML-2 and ML-3 Contactors complete all as specified and directed. |
| 107 | S&F in repair3 phase sequencer complete all as specified and directed. |
| 108 | Supply and laying in replacement of CPVC pipes of outer dia 16 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 109 | Supply and laying in replacement of CPVC pipes of outer dia 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 110 | Supply and laying in replacement of CPVC pipes of outer dia 25 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 111 | Supply and laying in replacement of CPVC pipes of outer dia 40 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 112 | Supply and laying in replacement of CPVC pipes of outer dia 50 mm SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 113 | Supply and laying in replacement of Unplasticised PVC pipes of dia 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 114 | Supply and laying in replacement of Unplasticised PVC pipes of dia 20 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 115 | Supply and laying in replacement of Unplasticised PVC pipes of dia 25 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 116 | Supply and laying in replacement of Unplasticised PVC pipes of dia 40 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 117 | Supply and laying in replacement of Unplasticised PVC pipes of dia 50 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 118 | Supply and fixing in replacement of CPVC Ball Valves with brass threaded (two sided) , 16 mm (1/2”) dia complete all as specified and directed. |
| 119 | Supply and fixingin replacement of CPVC Ball Valves with brass threaded (two sided) , 20 mm (3/4”) dia complete all as specified and directed. |
| 120 | Supply and fixing in replacement of CPVC Ball Valves with brass threaded (two sided) , 25 mm (1”) dia complete all as specified and directed. |
| 121 | Supply and fixingin replacement of CPVC Ball Valves with brass threaded (two sided) , 40 mm (3/2”) dia complete all as specified and directed. |
| 122 | Supply and fixing in replacement of CPVC Ball Valves with brass threaded (two sided) , 50 mm (2”) dia complete all as specified and directed. |
| 123 | Supply and fixing in replacement of UPVC Ball Valves of size 16 mm (1/2”) dia complete all as specified and directed. |
| 124 | Supply and fixing in replacement of UPVC Ball Valves of size 20 mm (3/4”) dia complete all as specified and directed. |
| 125 | Supply and fixing in replacement of UPVC Ball Valves of size 25 mm (1”) dia complete all as specified and directed. |
| 126 | Supply and fixing in replacement of UPVC Ball Valves of size40 mm (1½”) dia complete all as specified and directed. |
| 127 | Supply and fixing in replacement of UPVC Ball Valves of size50 mm (2”) dia complete all as specified and directed. |
| 128 | M&L in replacement of MS ERW pipe of bore 150 mm confirming to IS-1259 PART-2, medium grade. |
| 129 | M&Lin replacement of MS ERW pipe of bore 100 mm confirming to IS-1259 PART-2, medium grade, complete all as specified and directed. |
| 130 | M&Lin replacement of MS ERW pipe of bore 80 mm confirming to IS-1259 PART-2, medium grade, complete all as specified and directed. |
| 131 | M&Lin replacement of MS ERW pipe of bore 50 mm confirming to IS-1259 PART-2, medium grade, complete all as specified and directed. |
| 132 | M&Lin replacement of MS ERW pipe of bore 25 mm confirming to IS-1259 PART-2, medium grade, complete all as specified and directed. |
| 133 | Supply and fixing in replacement SS (Stainless Steel) Single head landing valve with 80 mm N.B.flangedinlet, SS spindle (IS : 6603) controlled 63 mm dia instantaneous female outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories conforming to IS:5290.Includingfixing with anchor fastener and flanged tappingfromwet riser,complete all as specified and directed. |
| 134 | Supply and fixing in replacement SS (Stainless Steel) double head landing valve with 80 mm N.B.flangedinlet, SS spindle (IS : 6603) controlled 63 mm dia instantaneous female outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories conforming to IS:5290.Includingfixing with anchor fastener and flanged tappingfrom wet riser, complete all as specified and directed. |
| 135 | M&Lin replacement of Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard, complete all as specified and directed. |
| 136 | Supply and Fixingin replacement 63 mm dia instantaneous pattern SS (Stainless Steel) Short branch pipe,20 mmdia nozzle conforming to IS 903, suitable for inter connection to hose pipe,coupling complete all as specified and directed. |
| 137 | Supply and fixing in replacement ofNon-percolating rubber reinforced lined fire hose pipe (as per IS : 636) Type-A of 63 mm dia and length as described below. The hose shall be rated for burst pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked SS male & femalecoupling (IS:903) bound & riveted to hose pipe with aluminum rivets & 1.5 mm GI wire. (For Internal Hydrant & External Hydrant). Complete all as specified and directed. |
| 138 | Supply and fix in replacement of Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia, complete all as specified and directed. |
| 139 | S&F in replacement sluice valve 80 mm bore class-1 ISI marked confirming to IS-14846flanged ends drilled pressure rating PN 1.6 having stainless steel spindle with cast iron wheet at top complete with nuts, bolts, washers and rubber gasket including jointing and testing complete all as specified and directed by Engineer-in-charge |
| 140 | S&F in replacement sluice valve 100 mm bore class-1 ISI marked confirming to IS-14846flanged ends drilled pressure rating PN 1.6 having stainless steel spindle with cast iron wheet at top complete with nuts, bolts, washers and rubber gasket including jointing and testing complete all as specified and directed by Engineer-in-charge |
| 141 | S&F in replacement sluice valve 150 mm bore class-1 ISI marked confirming to IS-14846flanged ends drilled pressure rating PN 1.6 having stainless steel spindle with cast iron wheet at top complete with nuts, bolts, washers and rubber gasket including jointing and testing complete all as specified and directed by Engineer-in-charge |
| 142 | S&F in replacement sluice valve 200 mm bore class-1 ISI marked confirming to IS-14846flanged ends drilled pressure rating PN 1.6 having stainless steel spindle with cast iron wheet at top complete with nuts, bolts, washers and rubber gasket including jointing and testing complete all as specified and directed. |
| 143 | S&F in replacement ofswinging type First Aid hose reel in red color drum with 30 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia gate gun metal valve stop cock, (IS:778, class - II) terminating with SS coupling&nozzleof 6 mm outlet with shut off valve confirming to IS 8090 - 1976complete withMS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastener, bolts & nuts. |
| 144 | S&F in replacement Gun metal fire brigade inlet connection for connecting to external fire hydrant ring main consisting of two way 63 mm dia instantaneous type male coupling with built in check valve and 150 mm dia , flanged out let complete with all accessories. |
| 145 | S&F in replacement of signage shop glow in dark FIRE EXIT sign board with man running arrow symbol and stair of dimension 12" x 6" X 8 mm decorative transparent acralic, including fixing arrangement all as specified and directed. |
| 146 | M&Lin replacement of Pressure gauge 4"dial 0-14 kgs rating, complete all as specified and directed. . |
| 147 | S&F in replacement air cushioning tank 250mm dia x 1000 mm high with dished top, made of minimum 6mm thick MS pipe/plate complete with 20mm dia. Brass air valve (ball type), 20 mm dia stop valve, pressure gauge with brass stop cock, nipple tees elbows and all accesories, complete all as specified and directed. |
| 148 | S&F in replacement branch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090, complete all as specified and directed. |
| 149 | M&Lin replacementProvision of fire point with shade and accessories like as bucket, fire bitter, fire hook, digging tool etc, complete all as specified and directed. |
| 150 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 0.4 mpa working pressure for 150 mm dia MS pipe, complete all as specified and directed. . |
| 151 | M&Lin replacementYard hydrant Post / Stand Post 80mm DiaMS both flanged type 1.5m Height. complete all as specified and directed. |
| 152 | M&L for PCC (1:2:4) type B-1 finished even and smoooth without using extra cement as on brick pillars, flooring, plinth, filling of roads etc complete all as specified and directed. |
| 153 | M&L for Repair/Servicing to monoblock motor and pump set 15 HP with greasing and replacement of elctrical terminal and all worn out parts including painting complete all as specified and directed.(Jockey pump). |
| 154 | M&L for Repair/Servicing to Centrifugal motor and pump set 50 HP with greasing and replacement of elctrical terminal and all worn out parts including painting complete all as specified and directed. (Main Fire fighting pump). |
| 155 | M&L for Repair/Servicing to Centrifugal motor and pump set 75 HP with greasing and replacement of elctrical terminal and all worn out parts including painting complete all as specified and directed. (Main Fire fighting pump). |
| 156 | M&L for Disconnecting of electrical connections from panel board including disconnecting the cable leads from the motor terminal box and taking down/out electric motor ofcapacity 50 HP from base plate of pump set after opening the nuts, bolts etc and transporting the motor to workshop for repair Opening the electric induction motorincluding taking down/out the burnt winding wire , cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge ,weight etc. including servicing to pump and all other insulating material to make it functional and back, re-installed after repair including testing complete all as specified and directed. |
| 157 | M&L for Disconnecting of electrical connections from panel board including disconnecting the cable leads from the motor terminal box and taking down/out electric motor ofcapacity 75 HP from base plate of pump set after opening the nuts, bolts etc and transporting the motor to workshop for repair Opening the electric induction motorincluding taking down/out the burnt winding wire , cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge ,weight etc. including servicing to pump and all other insulating material to make it functional and back, re-installed after repair including testing complete all as specified and directed. |
| 158 | S&F in replacement of Dry Chemical Powder Fire Extinguisher ( ABC Type ) 6 Kgs capacity completewith chromium plated gun metal union(cap), fitted with braided hose and opennozzle with initial charge of DryChemical Powder and gas cartridge (STORED PRESSURE TYPE)The extinguisher is internally coated with Lead Tinby electrolitic Process and externally coated with lead tin with Fire red Paint and cylinder bearing No. (IS:15683:2006) and the gascartridge bearing with ISI certitifcation markcomplete all as specified and directed. |
| 159 | S&F in replacement ofcarbon-di-oxide 9.0 Kgs capacity fire extinguisher, made of mild steelwith chromium plated gun metal union (cap), fitted with braided hose The extinguisher is internally coated with Lead Tin by electrolitic Process and externally coated with lead tin with Fire red Paint and cylinder bearing No. IS:2878 and the gascartridge bearing with IS certitifcation markcomplete all as specified and directed. |
| 160 | S&F in replacement branch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090, complete all as specified and directed. |
| 161 | M&L for Comprehensive monthly maintence ofconventionalfire alarm system installed in JCB Lab of Metcalfe HouseArea.The detail scope of work consists of the following : (i)Cleaning inspecting, checking and repairing if required all the equipments of fire detection system. (ii)Operational test of all the equipment of fire detection system in presence of rep of users and JE/Engrin-charge. (iii)The contractor will submit test report regarding functioning of all the equipments duly signed by contractor, users rep and Engr-in-Charge. (iv)The maintenance shall be carried out through manufacturer representative or his authorised Rep. (v)Emergency visit will be carried out when called in addition to the normal monthly maintenance in case of any failure in the system due to any cause without additional cost. (vi) Material required for replacement will be measured and paid separately under respective items of this schedule. |
| 162 | S&F in replacementfire alarm control panel complying with BS EN 54 Single loop panel with 99 detectors & 99 modules and upto 200 detectors and modules per loop complete all as specified & directed. |
| 163 | S&F in replacement detectors complying with and type certified to EN-45 Addressable type multisensor detector with heat and smoke combination Photoelectric/ Optical with base with self built intelligence as per IS:11360 complete all as specified & directed. |
| 164 | Supply, laying of multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 2 core 1.5 sqmm ISI marked complete all as specified and directed. |
| 165 | Supply , laying of multi stranded copper conductor PVinsulated and unsheathed FRLSH cable 4 core 1.5 sqmm ISI marked complete all as specified and directed. |
| 166 | Supply and fix addressable mannual call point resettable type complete all as specified and directed . |
| 167 | Supply, Installation, testing and commissioning of 06 Watt ceiling/Wall speaker complete all as specified and directed. |
| 168 | S&F in replacement ofSprinkler concealed type (Standard response) as per IS:15106/TAC guidelines 68 degree temperature rating pendent type complete all as specified and directed. |
| 169 | S&F in replacement of signage shop glow in dark FIRE EXIT sign board with man running arrow symbol and stair of dimension 12" x 6" X 8 mm decorative transparent acralic, including fixing arrangement complete all as specified and directed. |
| 170 | S&F in replacement ofRigid mild steel conduit, medium grade welded of 20mm diameter concealed/Surface inwall/Ceiling/above false ceilingand all fixing accessories/ materials.. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
