|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required ( Group B) |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated Copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required. (i) 2x1.5 sqmm + 1x1.5 sqmm earth wire |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated Copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required. (i) 2x 4 sqmm + 1x 4 sqmm earth wire |
| 5 | Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 6 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 7 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 8 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 9 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 10 | Supplying and fixing following way, single pole andneutral sheet steel, MCB distribution board, 240 volts,on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a)8 way, double door |
| 11 | Supplyingand fixing 5 ampto 32 amp rating 240 volts\"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existingMCB DBcomplete withconnectiontesting and commissioning etc. as required. a) Single pole |
| 12 | Supplyingand fixing 5 ampto 32 amp rating 240 volts\"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existingMCB DBcomplete withconnectiontesting and commissioning etc. as required. b) Double pole |
| 13 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 14 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required |
| 15 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthingas required. |
| 16 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 17 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 18 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 19 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For horizontal run) |
| 20 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run) |
| 21 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 22 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.A) 2 X 25 sq. mm (22 mm) |
| 23 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering . A) upto 35 SQMM |
| 24 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. A) upto 35 Sq mm |
| 25 | Providing, laying and fixing 40 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required of make-Jindal/Prakash/TATA/Bansal etc |
| 26 | Supply, installation, testing and commissioning of 20 watt LED tube fittings prewired for LED tube, complete with all accessories and LED tube directly on ceiling/ wallincluding connection with 1.5 sq. mm FRLS PVC insulated copperconductor single core cable etc as required. ( Havells / Philips/CG/Bajaj make or as approved by Enggineer in-charge) |
| 27 | Supply and installation 300 mm steel body exhaust fan of double ball bearing light duty motor with protective bird guard and louvers shutters complete with frame in the existing opening, including, making good the damage, connection, testing, commissioning etc. as required. (USHA or Havells/Khaitan make) |
| 28 | Supply and fixing of 10 watt white light LED slim fit LED Batten with integrated electronic driver complete with all accessories including connections etc. as required. (item Cat No. LHEXBLP7IN1W010Havells/Crompton/Bajaj/CG make) |
| 29 | Supply, installation, testing and commissioning of 1200 mm ceiling fan suitable for operation on 230 Volt, 50 Hz including wiring the down rods of standard length (upto 30 cm or as requireq) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (USHAor it\"s equivalent to Havells/Khaitan/Bajaj make) |
| 30 | Supply and fixing of 9 watt LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink etc. as required. (Havells or Philips/Bajaj/CG make) |
| 31 | Providing and fixing 30 watt LED street light luminaire IP66 Protection, heat resistant toughened glass with frame, pressure dia cast aluminium housing, better optics for uniform distribution with the help of 1.0 mtr long 25 mm dia GI pipe B class suitably bent to the require shape with clamp, nuts and bolts including connectionwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Havells make or its equivalent to Philips/CG/Bajaj make) |
| 32 | Supply,and fixing 1600 VA home 1 KWp Solar Inverter on Grid/UPS Solar Brainy Eco continuously monitorings the state of battery voltage, Solar Power output and the load. when the battery voltage falls below a preset level, brainy Eco transfers the load automatically to the grid/ DG Power and also Charges the batteries through the grid charge. when the batteries are charged to the preset level, the grid/ DG power supply automatically disconnects from the system and the load runs through brainy Eco. (make Brainy Havells/ECO UTL 1625/TATA Green/Luminous or as approved by Engg Branch) |
| 33 | Supply and fixing 12 Volt,150 Ah Solar Battery, charging current AMP-15 Amp , long shelf life, heavy duty Tubular plates to give exellent cycliclife with deep cycle capabilities. suitable for all type of UPS/HUPS and standhy application (UTLMake-UTL series) (make Exide/TATA Green/Luminous/Exide or as approved by Engg Branch) |
| 34 | Supply and fixing of540 watt24 v solar panel Monocrystline silicon solor sell coonected in series, anodised alimunium frem for structural support and shock, resistance, certificates IEC 61215 standard, IEC 61730-1, IEC 61730-2, IEC 60904-1, CE certified, MNRE< Govt of india Approved. (MAKE Havells/PAHAL/TATA Green/Luminous/Exide or as approved by Engg Branch) |
| 35 | Supplying & Installation structuure for solar panel with fram 4 Nos. (4x6 Fit) structure with complete foundation, fitting and wiring with complete accessories etc as requiredin cement concrete 1:3:6 (1 Cement : 3 Coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation. |
| 36 | Supplying, Installation testing and commissioning of 1 HP single phase monoblock motor pump set suitable for 50 Hz, 240V A.C. Supply with32 mm UPVC pipe,bend reducer , foot valve,motor protection box of size-450mmX450mm X450mm,Made with CRCA sheet 1.2mm thick sheet, locking arrangement, painting etc.as required. (Make of CG /Crompton/ Lubi/Havells or as approved by Engg Branch) |
| 37 | Supplying, Installation, testing & Commissioning of cubical type costruction wall/floor mounting LT, TTA, Panel suitable for 415 V, 3 Phae, 4 wire 50 Hz Ac supply system Having depth more than 30 cms to up to 60 cms of suitable size fabricated in compratmentalized design for CRCA sheet steel of 2 mm thick for fram work/ load bearing members/doors and 3 mm thick for gland plates including cleaning & finishing complete 7 or more tank process for powder coating in approved shape, having 200 Amp capacity TPN Busbars of high conductivity, entire panel shall have a common tinned alluminium earth bar of 25 mm X5 mm at the rear with 2 nos earth stud/ terminals, solid connections from main busbar to switch gears with required size of aluminium bus bar and connections, interconnections, control wiring with suitable size copper conductor FRLS single core cable as per CPWD specifications including providing and fixing of following switchgears and accessories. A) INCOMMER: i) 32 Amp TPN SDFU with Din type fuse (Three Pole & Neutral) in SS enclosure IHHCD00032 Make Havells - AC-23 A, 50 Hz, 415 V = 1 No., ii) 40 Amp 4 Pole off load Changeover switch in SS enclosure item IHCNFE0040 make Havells, 50 Hz, 415 V = 1 No. iii) 200 Amp capacity TPN Busbars , 50 Hz, 415 V = 1 No. B) 32 Amp DP MCB = 3 Nos. |
