Tamilnadu Co-op Milk Producers Federation Limited has published Tender For Construction Of Building For Accommodating 5Kl Bmc At Pethanaikanur Mpcs. Submission Date for this Tender is 22-02-2024. Building Work Tenders in coimbatore Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and refilling the sides,cleaning and leveling the site, etc., complete complying with standard specification. |
| 2 | Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | Supplying and filling with M-Sandfor basement to required thickness, watered, well rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Supplying and filling with gravel forfoundation and basement to required thickness, watered, well rammed and consolidated, etc., completed as directed by the departmental officers. |
| 5 | Plain Cement Concrete 1:4:8 (One Cement, Four M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation and flooring the top surface rough to receive the floorincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. |
| 6 | Brick work in Cement Mortar 1:5 (one part cement and five parts M-sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3"to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification. a)for Foundation and Basement |
| 7 | b)for above basement up to 4.50m ht. |
| 8 | Supplying , erection and steel centering for all RCC works using M.S Sheet, M.S. angles casurina props C.W.joints for all type of RCC works (ie) beams, roof slab, lintel, column footing, column & roof beam etc., including necessary supports with all cross bracing, filling the slits and holes the reprieved materials should be taken by the contractor and side shuttering etc., complete as directed by the departmental officers. a)Up to basement - Column surface |
| 9 | b)Up to basement - Plain surface |
| 10 | c)above basement level 3.30m height - Plain surface |
| 11 | Reinforced Cement Concrete 1:2:4 (One Cement, Two M-sand and Four hard broken stone jelly) using 20 mm gaugemachine crushed hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. complete complying with standard specification and as directed by the departmental officersa)for Foundation and Basement |
| 12 | b)Above basement up to 4.50m ht |
| 13 | Supplying, fabricating and placing in position of reinforcement, grills for all RCC works including cost of steel and binding wire , cutting and tying etc., complete as directedby the departmental officers.MS / RTS rods in all floors |
| 14 | Plain Cement Concrete 1:2:4 (one cement, two M-sand and four hard broken stone jelly) using 20mm jelly for the machinery bed, flooringand other bed blocks works and flooring including curing (excluding centering) etc., complete as per standard specifications and as directed by the departmental officers. |
| 15 | Supplying and fixing of cuddapah slab 38 / 40mm thick including cutting and polishing on both side etc.,complete complying with standard specification and as directed by the departmental officers. |
| 16 | Supplying and laying of unpolished one side and other side polished machine cut modikuppam Paradise granite slab of size 600x450x30/50mm thickness laid over a cement mortar 1:3 (One cement and three m-sand)-20mm thick including conveyance, cutting, laying, curing and pointing the joints with white cement mixed with matching colouring pigments etc., complete as directed by departmental officers.a) |
| 17 | b) for 50mm thick |
| 18 | Supplying and fixing of steel rolling shutter (pull and push type) with ISI make of approved quality with MS lathes 75mm wide and 18 gauge GI sheet thick to a different sizes including all accessories like sliding groves, shafts, springs, bearings, hood and locking arrangements and grouting the side and top assembly with walls and beams etc. complete and as directed by the departmental officers. |
| 19 | Fabricating, Supplying and fixing in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion "J" section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made ofF7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly etc complete as directed by the departmental officers. |
| 20 | Supplying and fixing in position of mild steel grills for following size square rod and cutting, welding including priming coat etc complete as directed by the departmental officers. |
| 21 | Dadooing wallswithprinted design colour glazed tiles of size 300mm x 200mm x 6mm laid in Cement Mortar 1:2 (One Cement and Two M-sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (Required shape and design) etc., |
| 22 | fabricating, Supplying and fixing in position of mild steel (RHS) Rectangular steel hollow section following thickness and M.S channelsizes of 150mmx75mmX5.7mm thickness for loading dock area including cutting, welding and fixing in purlin etc., completed as directed by the departmental officers. |
| 23 | Supplying and fixing in position ofPowder coated galvalume colour sheet of 0.47mm thickness with necessary bolts, nuts and washers, metal screwsetc. complete with standard specification and as directed by the departmental officers. |
| 24 | Special ceiling plastering Cement Mortar 1:3 (One Cement and Three P- Sand) 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 25 | Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick in all floors including curing and scaffolding etc. complete complying with standard specification and as directed by the departmental officers. |
| 26 | Plastering with Cement Mortar 1:3 (One Cement and Three P-Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 27 | Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as directed by the departmental officers with standard specifications. |
| 28 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 29 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (exterior) of first class quality and of approved colour over one coat of priming coat including scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. |
| 30 | Painting two coats of new iron work using ready mixed synthetic enamel paint of approved quality and colour over a priming coat etc. complete as directed by the departmental officers. (such as steel window, Grill , M.S Channel & rolling shutter ets.,) |
| 31 | Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.For BMC building (SD 409) |
| 32 | Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps For BMC building (SD 132) |
| 33 | Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete For BMC meter board (SD 130) |
| 34 | Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.For BMC building (SD 735) |
| 35 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End For BMC building (SD 652) |
| 36 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) Light pointpoint for BMC Hall and reception (SD 10) |
| 37 | Supply and fixing of 20W 4 feet LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting complete. (Make: Philips / Havells / Equivalent) lights for BMC Hall and reception: |
| 38 | Supply and fixing of 2 Nos. 5Aandd 1 No.15A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) Plug for BMC hall and Reception (SD 138) |
| 39 | Supply and fixing of 48W LED street light fitting withon wall or in existing post with with PVC unsheathed copper leads from terminals to the fitting complete for building light (Make: Philips / Havells / Equivalent)For BMC hall(SD 535) |
| 40 | Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.0 sq.mm copper wire and making good of the concealed portion with suitable colour for 15 nos of 5A plug set in BMC hall, office, receiption and genset room(SD 427) |
| 41 | Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. For main DB (SD 50) |
| 42 | Supply and run of No.8 copper wire in 5/8" PVC rigid pipewith necessary clamps / supports on wall / floor / ground for earth connection from earth to incoming DB(SD 459) |
| 43 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class "B" GI pipe of dia not less than 32mm complete with necessary masonry work for BMC building (SD 234) |
| 44 | Supply and fixing of 1200mm(48") High speed AC Ceiling fan complete with 2 module stepped electronic 100W regulator with 300mm down rod on the existing clamp (Make : Crompton/Havells/Equivalent) for BMC building (SD 106) |
| 45 | Supplying and fixing of UPVC pipe of approved quality including E.W excavation and refilling etc., complete a) 3/4" dia |
| 46 | b) 1" dia |
| 47 | Supplying and fixing of 1.00 HP monoblock pumpetc., complete M-1063 |
| 48 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
