Military Engineer Services-MES has published Tender For Provn Of Water Pumping Station With Ro Plant At Budhwal Under Ge South Akhnoor. Submission Date for this Tender is 14-03-2024. Building Work Tenders in akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-03-2024 |
| 2 | 06-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-03-2024 |
| 3 | 11-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-03-2024 |
| Sl. No. | Item Description |
| 1 | Provision of trial bore hole /well of 200 mm dia size pilot bore through any kind of soil/strata including hard dense stone /boulder by means of direct rotary method below ground level upto 250meter depth complete all as specified and directed by Engineer in charge. Note :- The depth of trial boring of the tube well at the site indicated by the GE is anticipated to be 250 meter below ground level . The depth may, however be ordered in writing to be varied by the GE up to a maximum of 25 %/300mtr of the above mentioned depth (plus or minus). If the GE decided that suitable water bearing strata is not available in the aforesaid bore or the boring cannot be continued further on account of the type of strata met with, he may order the contractor to bore at other site(s) selected by the GE, until suitable water bearing strata is met with or boring cannot continue further on account of the type of strata met with provided the total number of bores (including the first bore) does not exceedthree Numbers the decision of the GE shall be final & binding as to whether or not the bore can be continued further in the strata met with. |
| 2 | Description all as per item No 1above but bore hole of size 450mm (18 inches) from 30 mtr to 70mtr below the ground level complete all as specified. |
| 3 | Description all as per item No 1above but bore hole of size 380mm (15 inches) from 70 mtr to 90mtr below the ground level complete all as specified. |
| 4 | Description all as per item No 1above but bore hole of size 300mm (12 inches) from 90 mtr to 100mtr below the ground level complete all as specified. |
| 5 | Development of trial bore by reaming upto 525 mm for 60 mtr from ground level including pea gravel 2mm to 6mm size of approaved quality as ordered to packed around the casing pipe/slotted pipe in the bore well to entire depth. |
| 6 | M&L for development of tubewell with compressed air and after with 25 % extra cap pump by pumping muddy water by high velocity Air compressorof minimum pressure 10 Kg/sqcm until sand free and clean water is obtained at optimum yield including arrangement for equipment fitting for minimum 24 hrs development complete all as specified & directed. |
| 7 | Yield test for the bore well for the continously pumping for 16 hours to determine safe pumping yield . (Note:- Conducting yeild test is the responsibility of the contractor durring development of tubewell. Contractor shall submit yeild test report on completion of development of Tube Well) |
| 8 | S & F the following items as per site requirement for bore well having casing pipe as 200 mm dia all as specified and directed by Engineer-in-charge:- (a) Bail plug suitable for 200m dia MS pipe including its fixing arrangements. (b) MS strip for centering of size 50X6mm for center guide for casing pipe of size 200mm to 250 mm fixed with welding or suitable nut&bolts (c) MS iron clamps made of MS Flat 100mmx 12mm for 200 mm bore pipe with suitable nut bolts & washers (d) Electric logging (e) Wooden sample strata box (at every 3 meters depth) one set in suitable box pattern with glazed shutter and pigeon holes for samples (f) Well cap for 200 mm dia of pipe at the top of casing pipe of bore well with locking arrangement. |
| 9 | Supply,assembling including jointing lowering and fixing heavy class MS ERW screwed and socketed housing pipes 200mm (8 inch) nominal bore, heavy class, having minimum 4.85 mm wall thickness as per IS 3589 (1981) and all around welded with 4 Nos stiffeners of flat iron 40X6mm, 300mm long complete all as specified & directed. |
| 10 | Supply ,assembling including jointing lowering and fixing heavy class MS ERW screwed and socketed slotted pipe 200mm dia in lieu of casing pipe of 200 mm dia (8 inch) nominal bore, heavy class, having minimum 4.85 mm wall thickness as per IS 3589 (1981) and all around welded with 4 Nos stiffeners of flat iron 40X6mm, 300mm long complete all as specified & directed. |
| 11 | Supply and lay MS pipe galvanized, “Heavy class”, including fittings, 50 mm (2”) dia as column pipe all as specified and directed by Engineer-in -Charge. |
| 12 | Supplying, fixing, jointing and welding MS Flange of size 50 mm (2”) dia with 4 Nos holes to joint with MS pipe galvanized, “Heavy class" as column pipe, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply, install, testing and commissioning of Submersible pump set, electric driven 415 V, Three Phase, suitable for 200/250 mm dia bore well (Casing pipe size 200/250 mm) of 08 HP capacity, 06.0 KW with head range 84 meter, discharge 365 LPM inclusive of 40 metre long submersible cable andstarter of suitable capacity/size. Make:- Crompton Greaves- 6W8R7.5 |
| 14 | S&F 50 mm bore steel tubing medium grade galvanized with all necessary fitting and laid in trenches or fixed on walls including jointing & testing complete all as specified and directed. |
| 15 | S&F 25 mm bore steel tubing medium grade galvanized with all necessary fitting and laid in trenches or fixed on walls including jointing & testing complete all as specified and directed. |
| 16 | S&F cast iron sluice valve in position flanged with iron wheel handle clockwise closing with drilled hole bras spindle heavy duty PN-1.6 class-II conforming to IS-780 including gasket joint nut, bolt & washers for any type horizontal & vertical with suitable arrangement for fixing all as required of size 50 mm dia. |
| 17 | Supply and fixing in replacement of non returning sluice valve ISI marked with flanged ends suitable for 50 mm bore, providing flanged joints with heavy duty rubber gaskets, complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed of size 25 mm. |
| 19 | Supply only triple Spur gear chain pulley block capacity 5 Ton with 6 mtr lifting height all as specified. Make :- INDER Cat Part No:- P- 342d or equivalent Iin Taparia/HIRA |
| 20 | Supply, installation, testing and commissioning of silent Diesel Engine driven generating setenclosed in acoustic coverof capacity 10 KVA, water cooling, 0.8 power factor, 415 volts, AC 3 phase 4 wire,50 Hz, 1500 RPM, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears, control panel having meter including Battery 12 volt, 150 AH, fuel tank, including filled with initial lubricant and sound proof canopy and mounted on common base plate with flexible coupling as per CPCB norms and foundation etc. complete in all respect of capacity 10 KVA complete all as specified and directed by Engineer-in-Charge. Notes: (a) Diesel and lubricant required for testing of DG set shall be arranged by the contractor at his own cost and expenses. (b) The foundation of DG set shall be provided by the contractor as per latest BS/IS specification and as directed by GE. The cost of the same shall be deemed to included in the rate quoted by the tenderer. (c) Contractor shall test the DG set after installation in presence of EIC and test result shall be maintained. Make:- KOEL by KIRLOSKAR, Model No:- KG1-10AS5 or equivalent in Mahindra/Cummins |
| 21 | Supply and fix Servo Controlled Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 10 KVA. |
| 22 | M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 3 meter below ground level with top edge of the earth plate at a depth not less than 2.25 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers, all around top and bottom and electrode connection by using GI Strip 32x6 mm (upto the body of equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles. GI pipe 20mm bore light grade for watering with funnel and wire mesh including medium grade GI Pipe 40mm bore protection and 40 mm GI pipe light grade for protection of strip. PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover in M20 (design mix) complete all as shown in Electrical Plate No.5 of MES Standard Schedule of Rates (Part-I) of 2009 complete all as specified and testing on completion. Note:-(i)The unit rate shall include for protection pipe, GI water pipe, wire mesh, funnel, excavation.RCC pit cover, test point, 32mm GI strip from top of earth plate upto 5M above ground level and if GI protection is less than 5 meter, no price adjustment shall be made.(ii)If the testing result of earthing work is not been found satisfactorily then the contractor shall do other earthing work at his own cost and nothing shall be permissible on this account.(iii)Earthing work will be carried out in presence of MES representative. |
| 23 | Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable ofsize 25 sqmm, 3.5 core:- (Make - Havells / Polycab / Finolex / Universal as approved) |
| 24 | M & L for CGI Shed of size 5 mtr x 4 mtr with 3.10 mtr heightfrom RCC foundation for housing Servo Controlled Voltage stabilizer and LT Panel. The shed comprising CGI sheets, angle iron,iron flats, nuts, bolts, J type hooks and washers, grooting in PCC floor complete all as specified. |
| 25 | Supply, installation, commissioning and testing of powder coated factory made panel board outdoor type double door confirming to IP 52 or better protection, of suitable size made of Robust steel sheet construction made from min 3.15 mm steel sheet with countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket around doors, with provision of lock inserts, earthing straps, wiring plan pockets, door stay, fan and filter units, heaters and grouted in ground by using angle iron frame of size 50x50x6mm, PCC (1:2:4) type C-1 with 20mm graded stone aggregate. Al bus bar system of size 25 x 4 mm, duly colour coded.The panel will have suitable space for mounting Starter for Submersible Pump Set, prewired with suitable size PVC insulated copper conductor cable, multistranded, housed with the following accessories Incoming:- (a) MCCB 3 Pole, 415 V, fixed type, 63 Amps with breaking capacity 16 KA- 01 No.. (b) Phase indicating LED type lamps (RYB)- 01 Set (Set of three). (c) Digital Ammeter, 96mmx96mm size, flush mounted, 0-200 Amps rating, with selector switch and CTs including all accessories- 01 No. (d) Digital voltmeter, 96mmx96mm size, flush mounted, 0-500 Volts rating, with selector switch and all accessories- 01 No Outgoing:- (i)MCB TPN, 415 Volts of capacity32amps, breaking capacity 10 KA- 02 No (Outgoing). (ii) On-Load Changeover switch, conforming to IS/ IEC: 60947-3, Four Pole, 415 Volts with 63 Amp capacity- 01 No. |
| 26 | Supply and fix Rotational moulded polytheylne water storage tank (cylindrical ), triple layered with closed top hoisted and fixed in position of capacity 10000Ltr. Make :- SINTEXCLASSIC DOUBLE WALLWater Tank or equivalent in Star/Ganga/ Plasto. |
| 27 | Cutting & screwing extg steel tubing of size 50 mm dia for alterations or additions or lengthening screw on pipe to form connector and done in position without taking down all as specified and directed. |
| 28 | Supply and fix bib taps, cast copper alloy screwed down, high pressure, with crutch or butterfly handle of size20 mm dia. |
| 29 | Supply, install, testing and commissioning ofWater Pump set with electric driven motor, with brass impeller, capacity 2 HP, 240 Volts AC, Single Phase, 50 Hz, 3000 RPM, Head range 20-60 Mtr, Discharge range 4300-1600 LPH, suitable for 25 X 25 mm dia bore pipe, complete all as specified and directed. Make:- Crompton, Model :- MINI EVEREST Water Pump, Code :- AGR.WAT.52877480/ Havells/Kirloskar |
| 30 | Supply and lay Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., of size 50 mm dia all as specified. |
| 31 | Supply and lay Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., of size 25 mm dia all as specified. |
| 32 | Supply and lay Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., of size 20 mm dia all as specified. |
| 33 | Supply and fix PPR Ball Valves (Brass Insert) of 50 mm bore all as specified. |
| 34 | Supply and fix PPR Ball Valves (Brass Insert) of 25 mm bore all as specified. |
| 35 | Supply and fix PPR Ball Valves (Brass Insert) of 20 mm bore all as specified. |
| 36 | Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, for laying pipe line etc, complete. |
| 37 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete. |
| 38 | Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete. |
| 39 | M&L fabrication of steel stagging made out of 75 x 75 x 8mm thick angle iron and flateiron of size65 mm in width x 6 mm thick complete including nuts, bolts, washers, necessary cutting, welding, bending cold or hot, drilling holes for bolts, in any shape as indicated or directed, grinding, earth work and grounting with PCC 1:3:6 in a four legs of staging of size 2 mtr x 2 mtr x 1 mtr ( L X W X H) for mounting of 10000 Ltrs PVC water storage tank and stand post for lorry filling of size 0.5 mtr x 0.5 mtr x 5 mtr (W X D X H)including one coat of red oxside primer, one undercoat and one finishing coat of synthetic enamel paint copmplete all as specified and directed. |
| 40 | M&L fabrication of steel stagging made out of 75 x 75 x 8mm thick angle iron, flate iron of size65 mm in width x 6 mm thick and MS channel of size MC 100 X 50 X 6 mm thick complete including nuts, bolts, washers, necessary cutting, welding, bending cold or hot, drilling holes for bolts, in any shape as indicated or directed, grinding, earth work and grounting with PCC 1:3:6 of size 1 mtr x 1 mtr x 1 mtr ( L X W X D) for submersible pump lifting structure including one coat of red oxside primer, one under coat and one finishing coat of synthetic enamel paint copmplete all as specified and directed. |
| 41 | Supply, installation, testing and commissioning ofReverse Osmosis (RO) purifying system for capacity 1000 Ltrs Per Hrs (LPH), fully automatic (max)formounted on steel frame heavy duty structure , complete all as specified and directed . Make :- Doctor Fresh, Model:- RCICO20 1000 LPH or equivalent in Kent elite Mineral RO / Declibac/Renuka Water treatment (a) Feeder Pump(b) Multi media filter (c) Activate carbon filter(d) Multiport valve(e) Anti-scalant dosing system(f) Media(g) Micron cartige system(h) High pressure pump (J) Membrane housing(k) RO Membrane (l) UV system(m) Wet panel instruments(n) Pressure switch(o) Inter connecting pipe(p) Dosing tank (q) Auto/ manual electric panel (r) Indicators |
| 42 | Supply and installation, testing and commissioning voltage stabilizer for automatic operation, single phase, naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of +- 2.5% and of capacity 5 KVA. |
| 43 | M&L for point wiring complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 4 Sq mm (nominal area) multi stranded copper conductorcable drawn though in including non metallic medium grade rigid PVC conduit ISI marked, 19/20 mm dia including all accessories on the surfaces of walls/floors/celling and making good the disturbed surfaces, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3mm thick and 2.5 Sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge. (a)One 5 pin socket out let, 15 Amps, independent. |
| 44 | S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal |
| 45 | S & F for MCB single pole and neutral 32 amps, 240 V, 10 KA, "C" curve |
| 46 | S & F sheet metal enclosure for DBs Double door when MCBs to be used Single pole and neutral with 200 Amps rated bus bar 240 V 2 Way. |
| 47 | M&L for point wiring complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 1.5 Sq mm (nominal area) multi stranded copper conductorcable drawn though in including non metallic medium grade rigid PVC conduit ISI marked, 19/20 mm dia including all accessories on the surfaces of walls/floors/celling and making good the disturbed surfaces, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3mm thick and 1.5 Sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge. (a)One light point/fan point/exhaust point controlled by one switch. |
| 48 | S & F switch piano type 5 A flush button single pole one way |
| 49 | S & F switch piano type 5 A flush button single pole one way |
| 50 | S & F LED Fluorescent tube light fitting, 1 x 20 W, LED IntegratedBatten T5 indoor decorative aluminium extruded T5 LED Battens - integrated type white complete with all accessories with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make :- C & S, Model :- Nakshatra/20W/W, Cat Part No :- LTTB4F20WLED/W - 4 ft White or equivalent in Bajaj/Havells/CG. |
| 51 | Supplying and fixing or passing through pipe,1100volts grade heavy duty cable with PVC insulated aluminium stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of size 16 sqmm, 2 core complete all as specified and directed by Engineer-in-Charge. |
| 52 | M & L for CGI Shedof size 5 mtr x 4 mtr with 3.10 mtr heightfrom RCC foundation for housing RO plant. The shed comprising CGI sheets, angle iron,iron flats, nuts, bolts, J type hooks and washers, grooting in PCC floor complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
