|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drain (not exceeding 1.5 m in width in 10 sqm on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 2 | Providing brick work soiling in foundation and under floor with stone / best qualitiy picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. |
| 3 | Steel reinforcement for RCC work including straighteing cutting, bending, placing in position and binding all complete upto plinth level & steel reinforcement of RCC work including straightening, cutting, bending placing in position and binding all complete above plinth level. |
| 4 | Centering and shuttering including strutting, propping etc and removal of form for foundation, footings, bases of column, etc for mass concrete. |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Column, Pillars, piers, abutment, posts and struts |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. |
| 8 | Providing and laying position grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinfocement. All work upto plinth level. |
| 9 | Reinforced cement concrete work in walls (any thickness including attached pilasters buttresses, plinth and string courses, fillets column, pillars, piers, abutment posts and struts etc.. Above plinth level upto floor five level, excluding cost of centering, shuttering finishing and reinforcement. |
| 10 | Brick work with common burnt clay F.P.S. (Non Modular) brick of class designation 7.5 in foundation and plinth in. |
| 11 | Brick work with common burnt clay F.P.S. (Non Modular) brick of class designation 7.5 in superstracture above plinth level upto floor V level in all shape and sizes in. |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately 9.1.1 second class teak wood. |
| 13 | 15 mm thick cement plaster in single coat on rough side of single or half brick wall of mix |
| 14 | Cement plaster skirting upto 30 cm height, with cement mortar 1..3 furnished with a flooting coat of neat cement. |
| 15 | Providing and fixing panalled or panelled and glazed shutter for doors, windows and clerestory window, fixing with butt hinges or required size with necessary screws excluding panelling which will be paid for separetely, all complete as per direction of Engineer-in-charge. |
| 16 | Steel work in buit up tubular (round, square or rectangular hollow tubes etc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 17 | Providing ridges or hips of width 60 cm overall width plain G.S. Sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. |
| 18 | Providing corrugated G.S. sheet roofing including vertical, curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washer filled with white lead. Including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch is horizontal/vertical or cuved surfaces) excluding the cost of purlins rafters and trusses |
| 19 | Providing, supplying and filling of local earth (including royalty) by mechanical tranches upto a lead 5 km also including ramming and watering of earth in layers not exceeding 20 cm in trenches, plinth sides of foundation etc. complete. |
| 20 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 and to layer 12 mm thick cement hardener consisting of mix 1.2 ….. |
| 21 | Distempering with oil bound washable distempering of approved brand and manufacture to give an even shade. |
| 22 | Finishing wall with water proofing cement paint of approved brand and manufacture of required shade 13.43.1 (New work) |
| 23 | Painting with oil type wood presentive of approved brand and manufacture.. |
| 24 | Applying priming coat. (13.50.1) with ready mixed pink or Grey primer of approved brand and manufacture on wook work (hard and soft wood) |
| 25 | Providing and fixing bright finished brass handle with screws etc. complete. |
| 26 | Providing and fixing IS 12817 marked stainless steel but hinges with stainless steel screws etc complete. |
| 27 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) |
| 28 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS:1868) |
| 29 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm……….. |
| 30 | Supplying fitting & fixing of sign board L/S |
