Military Engineer Services-MES has published Tender For Addition Alteration To Otm Accn Under Ge South Mamun. Submission Date for this Tender is 10-04-2024. Building Work Tenders in mamun Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Mar-2024 | Datecorrigendum1 | Date | 21-03-2024 |
| 2 | 14-Mar-2024 | Datecorrigendum2 | Date | 30-03-2024 |
| 3 | 20-Mar-2024 | Revisedpages | Technical Bid | 03-04-2024 |
| 4 | 20-Mar-2024 | Datecorrigendum3 | Date | 03-04-2024 |
| 5 | 20-Mar-2024 | RevisedBOQ | BOQ | 03-04-2024 |
| 6 | 01-Apr-2024 | CorrigendemtorevisedBOQ | Financial Bid | 03-04-2024 |
| 7 | 03-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-04-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick workbuilt in cement mortar including all quoins arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articleand removing rubbish to ouside the MoD land complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Demolition of cement concrete in ground floors and paving (un reinforced) not exceeding 15 cm, thickness, below or above ground level and removing rubbish to outside the MoD land complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Demolition of cement concrete(Reinforced) of any description and in any position not othewisespecifically provided forand removing rubbish to outside the MoD land complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with @ (at the rate of) 3.00 kg per sqm of area complete all as specified and as directedby Engr-in-Charge |
| 5 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed by Engr-in-Charge. |
| 6 | Removing old lime wash, (if any) hacking for key, raking out joints of old brick work built in cement mortar etc wall not previously plastered & scrubbing down with water to receive plastercomplete as all specified and as directed by Engineer-in-Charge. |
| 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each work complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site of work complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each including refixing in same opening after easing and adjustingcomplete all as specified and as directed by Engineer-in-Charge. |
| 10 | Takingdown,easing and adjusting shutters of any description, exceeding 1.00sqm and not exceeding 2.00 sqm each and re-fixing the Reprived Shutter,s in the same opening completeall as specified and as directed by Engineer-in-Charge. |
| 11 | Hacking out old broken glass (any thickness, size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm dia all as specified and as directed by Engineer-in-Charge. |
| 13 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm dia including with all fittings complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Dismantlingof plain or corrugated AC sheeting any gauge, thickness, including ridge etc as in roof covering complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Dismantlingstructural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) including all fitting, head, shoes, bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables including getting out in hard and densesoil complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth but exceeding3.00metre in depth for laying of cables including getting out in hard and densesoil complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cmeach complete all as specified and as directed by the Engineer-In-Charge. |
| 20 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material & Labour for hardcore of guage exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding15cmthick, watered and rolled/rammed to a true surface Engineer. |
| 22 | Material and labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litre per linear meter including drilling and plugging of holes with Cement Mortar 1:2to match the exisiting finish etc as in apron/plinth protection complete all as specified in IS-Code 6313 Part (3) : 2001 and as directed by Engineer-in-Charge. |
| 23 | Material and Labour for Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using chemical emulsion @ one litre per holeat a distance 300 mm apart along the junction of floor and wall, along joints in floors including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified in IS code-6313 Part (3) : 2001 and as directed by Engineer-in-Charge. |
| 24 | Material and labour for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in CM1:6 (measured on vertical face in contact with old wall only), including removel of serviceable bricks, hard core & disposal of store rubbish off the premises to a distance not exceeding 50 metre complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and Labour for Brickwork with Fly Ash Bricks (old size bricks) having crushing strength not less than 75kg/Sqm straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed by Engineer-in-Charge |
| 27 | Material and Labour for Brick work in CM (1:6) in old well Burnt Bricks (except brick) of any description in CM 1:6complete all as specified and as directed by Engineer-in-Charge. (Note : Old brunt clay bricks retrieved from demolition of Brick Work shall be used under the respective item of BOQ. |
| 28 | Material and labour for Plain Cement Concrete(1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in coping, bed, plaster,benching,etc & lighting rounleds or chamferred angles & throating including use of waste of form work complete all as specified and as directed by Engineer-in-Charge |
| 29 | M & L For reinforced cement concrete M-25 (design Mix)as in slab for WHB counter, self cooking plateform,complete all as specified and as directed by Engr-in-Charge. Note : (Reinforcement shall be measured and paid separately under respective item of BOQ). |
| 30 | Metirial & labor for Plain Cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate)as in mass filling in sunken slab of toilets, & like situations complete all as specified and as directed by Engr-in-Charge. |
| 31 | Supply and fixing for 35mm thickprecast cement concretelouvres and jallies (1:2:4) type-B0, (using 12.5mm thick graded crushed stone aggragete) (measured solid), including all mouldings but excluding frames Set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 32 | M & L for Plain Cement Concreteblock of type (B-1) (1:2:4) (using 20 mm grade crushedstone aggregate) for holding of GI Pipe suitable for fixing of GI Pipe with Aluminium rod of size 25mmx25mmx25mm complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour for plain cement concrete (1:4:8) type D-2 (Using 40 mm graded crushed stone aggregate) as in foundation for poles and stay mass concretes etc complete all as specified and as directed by Engr-in-Charge. |
| 34 | Material and labour for plain cement concrete (1:3:6) type C-2 (Using 40 mm gradedcrushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by Engr-in-Charge. |
| 35 | Material and labour forplain cement concrete (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate) as in levelling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edges including use & waste of form workcomplete all as specified and as directed by Engineer-in-Charge. |
| 36 | Metirial & labour for Precast reinforced cement concrete 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in manhole cover slab,complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately under respective item of BOQ). |
| 37 | Metirial & labour for Cement concrete (1:3:6) type C-1, (using 20 mm graded crushed stone aggregates) as in surface channel and drains, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Metirial & labour for Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and directed by Engineer-in-Charge. |
| 39 | Metirial & labour Add or deduct for each 25 mm girth or part thereof over or under 30 cm in cement concrete using stone cement including formis, mounds mitered stopped ends etc complete allow specified and directed by Engineer-in-Charge. |
| 40 | Metirial & labour for use and waste of formwok to soffits & slab ofrough finished surfaces of suspended slabs such as roof slab WHB counter, plateform, floor slabs landings and similar works complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 125mmx60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of plain cement concrete grade (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over one coat of red oxide primer after preparation of steel surface complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Supply and fixing of pressed steel frame made out of MS sheet 1.25mm thick of size 105mmx60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of plain cement concrete grade (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over one coat of red oxide primer after preparation of steel surface complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fixing of 35mm thick 2nd class hard wood Glazed and skeleton door shutters (factory made), open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) including two coats of synthetic enamel paint over a coat of pink primer after preparation of wooden surface complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Providing and fixing of window made of pre painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coted with epoxy primer of 5-7mm micron thick, finish pinted with a polyester paint of 12-16 micron thck and back coated with 5-7 micron thick alkyd backer.Section for outer frame should be of 72mmx55mm, centre mulion should be of 72x 50mm, section for fixed glass beading should be of 12x12mm and secion for shutter should be of 48mmx25mm, Outer frame and mullion section to have rebte for glazed shutter, fly mesh and 20mm provision for guard bar/grill fly mesh shutter section should be of 20mmx40mm .The section are to be cut to length mitre joined with corner bracket,centre mullion to be fixed with mulion cap,Elixir or equivalent stay,handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter.The window should be panelled with 4mm thick plain float glass and SS mesh for Fly mesh shutter 304 grade, Rubber gaskets are provided all around the glass.The above frame should be fixed to the concrete/masonary wall by means of self expanding screws including 10mm square guard bars with 152.4 mm pitch welded or riveted to steel frame, Complete for finished item of work complete all as specified and directed by as Engineer-in-Charge. |
| 45 | Metirial & labour for35 mm thick single piece factory made wire gauge door shutterand including of wire cloth ( steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, of size 19mmx19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cementincluding all requisite necessary accessories complete all as specifiedas per Drg No. CEPZ/TD-378/11,Sheet 1/1 dated 27/12/2011and as directed by Engineer-in-Charge. |
| 46 | Supply & fixing for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with MS hold fast of required size with necessary full body threaded star headed counter sunk S.S screwscomplete all as specified & as directed by Engineer-In-Charge.(Note : Stainless steel but hinges shall be measured and paid separately under respective item of BOQ) |
| 47 | Supply & fixing for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & as directed by Engineer-In-Charge.(Note : Stainless steel but hinges shall be measured and paid separately under respective item of BOQ) |
| 48 | Supply and fixing factory made 18mm thick WPC (wood particle composite) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 Kg / Cum bent to 90° including 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edgeslining using binding tap etc as in Kitchen cupboard Cabinet etc complete all as specified as per Manufacture specififaction and as per direction of Engineer-in-Charge. |
| 49 | Supply and fixing as in repair for stainless steel wire cloth of 0.36 mmnominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples and beads to frame complete all as specified & directed by Engineer-in-Charge. |
| 50 | Material and labour for 3 mm thick sheet glass ordinary quality fixed in glazing with oil putty or fixed with bead / glazing pins in squares size not exceeding 0.5 sqm in each pane complete all as specified and as directedby Engineer-in-Charge. |
| 51 | Material and labour for 3 mm thick Figured glass, pin head type & glazing with oil putty in squares of size not exceeding 0.5 sq.m in each pane complete all as specified and as directedby Engineer-in-Charge. |
| 52 | Supply and fixing of 100 mm longStainless steel Butt hinges, medium weight, with stainless steel hings cold rolled, and fixed complete all as specified and as directedby Engineer-in-Charge. |
| 53 | Supply and fixing of size 300mm long Aluminium alloy, anodised, sliding door bolt with haspe and staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directedby Engineer-in-Charge. |
| 54 | Supply and fixing of size 200mm long aluminiumanodized barrel tower bolts of extruded section ISI Marked and fixed complete all as specified and as directedby Engineer-in-Charge. |
| 55 | Supply and fixing of size 150 mm long aluminium anodized barrel tower bolts alloy handles, fabricated type anodised of extruded section (ISI marked) complete all as specified and as directedby Engineer-in-Charge. |
| 56 | Supply and fixing of 300mm long Mild steel stove enameled door spring ordinary rat tailrod pattern spring fixed to pressed steel frame / MS frame / wooden chowkhats and necessary welding work etc(if required), including roller and rolling plate complete all as specified and as directed by Engineer-in-Charge |
| 57 | Supply and fixing of 100 mm long hasp and staple, Aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F for floor door stopper of size 140mm long overall length ofcover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixing of size 125 mm long Alluminium anodised handles, fabricated type anodised extruded section (ISI marked) complete all as specified and as directedby Engineer-in-Charge. |
| 60 | Supply and fixingfor stainless steel wire cloth of 0.36 mmnominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples and beads to frame complete all as specified & directed by Engineer-in-Charge. |
| 61 | Supply and fixing ofContinuous (Piano) hinges, mild steel, bright finish, width of flaps 30mm (when open)complete all as specified and as directedby Engineer-in-Charge. |
| 62 | Supply and fixing as in repair of 25 mmouter dia bore stainless steel decorative drapery rod of thickness 20 guage with stainless steel brackets near to ends with stainless steel finials with adopter suitable for 25mm dia drapery rod at both ends complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fixing for stainless steel peg set of six of overall size of 400mmx30mmx3mmfitted with machine screw and wooden and plastic cleats (minimum weight not less than 190gms), complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Material and labour for Rendering 10mm thick in cement plaster on fair faces of or concrete surfaces as in celing in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directedby Engineer-in-Charge |
| 65 | Material and labour for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers i.e. first layer 10mm thick and second layer of 5mm thick shall be mixed with liquid water proofing admixture as per manufacturer"s instructions finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge Note : Water proofing compound shall be measured and paid for separately under respctive item. |
| 66 | Material and labour for rendering 10mm thick in cement mortar 1:6 for fair faces of brickwork or concrete surfaceand finishing the surface without using extra cement complete all as specified and as directed by Engineer-in-Charge |
| 67 | Material and labour for 75mm thick Plain Cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving and laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen of grade 85/25 and sand in ratio 1:2 by weight including use & waste of necessary form work complete all as specified and as directedby Engineer-in-Charge |
| 68 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick and area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqm as in skirting/dado/riser of steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the finish laid over 15mm thickness rendering as backing in C.M (1:6) & removing debries/tiles out of the premises etc complete all as specified and as directed by Engineer-in-Charge |
| 69 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick and area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the finish over 15mm thickness scread bed in CM (1:6) tiles of any type & pattern including cement mortar bedding & removing debries/tiles out of the premises etc complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Material and labour for vitrified tiles (light shade) 600mm x 1200mm x 10mm thick (square ort ractangular) polished and area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match the finish, over 15mm thick screed bed or bedding layers of mortar in Cement motar 1:6 for layingfloor finishes complete bedding and removing debris/tiles out off the premises, etc complete all as specified and as directed by Engineer-in-Charge |
| 71 | Material and labour for vitrified tiles (light shade) 600mm x 1200 x 10mm thick (square ort ractangular) polished and area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in skirting/dado/riser of steps etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match the finish, over 10mm thick screed bed or bedding layers of mortar in Cement motar 1:4 for layingfloor finishes complete including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and as directed by Engineer-in-Charge |
| 72 | Material and labour for glazed ceramic coloured tiles on vertical surface of size 450mmx350mmx7mm thick or 450mmx300mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM (1:4) finished rough including cement mortar bedding (but not backing) & removing serviceable tiles from site and rubbish off the premises complete allas specified and as directedby Engineer-in-Charge |
| 73 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick and area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqm as in Skirting vertical Surface walls set and jointed in neat cement slurry and pointed in coloured cement to match the finishover 15mm thickness scread bed in CM (1:4) tiles of any type & pattern including cement mortar bedding & removing debries/tiles out of the premises etc complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Material and labour for parking tile heavy duty coloured Endura tile dotted, top layer glazed non skidof size 300mmx300mmx10mm,made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for layingfloor finishes, complete all as specified and directed complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Machine and Labour for Machine cut kota stone slab flooring 18mm-20mm(size of stone shall not less than 55Cm x 55cm), 75 mm white marble border around, laid over & including20 mm thick screed based in cement Mortar (1:6) joint with gray cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine complete all as specified and as directed by Engineer-in-Charge |
| 76 | Material and labour for 18mm to 20mm thick green Granite work(table rubbed and polished) as in cooking plateform,window cill, steps etc and set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra and making hole for gas pipe including rounding bull Nose to expose edge and removing debris/tiles out off the premises etc complete all as specified and as directedby Engineer-in-Charge |
| 77 | Material and labour forsingle piece 16mm thick kota stone (Machine cut) of any type) work (table rubbed and primer polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick screed bed or bedding layers of mortar in Cement motar 1:4 including plasting to held mirror finish removing debris/tiles out off the premises etc complete all as specified and as directedby Engineer-in-Charge. |
| 78 | Material and labour for 75 mm thickness Plain cement concrete (1:3:6) (type C-2) (Using 40mm graded crushed stone aggregates) as in sub base for Flooringcomplete all as specified and as directed by Engineer-in-Charge |
| 79 | Material and labour for 60mm thick factory made machine pressed Precast Cement concrete (Rubberised coloured, Laminated) interlocking Paver block (using Vibro compaction method) (Topping thickness not less than 5mm) with Grey cement & pigment (non fadable glossy Pigment) of approved shade of any shape and size conforming to IS-15658-2006 of M-35 Grade laid over 50mm thick sand cushion under floor including watering and Consolidering including taking out existing interlocking paner blockcomplete all as specified and as directed by Engineer-in-Charge. |
| 80 | Material and labour for preparation of Old wood or wood based surfaces of any descriptionover 10 cm width or girth and applying one coats of synthetic enamelpaint on old wooden surface complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Material and labour for two coats of synthetic enamel paint on New steel surfaces of any description, n.exc 10 cm in width or girth,over a coatof Red oxide primer including preparation of surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Material and labour for preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint on wooden surface over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Material and labour for one coats of synthetic enamel paint on old steel or iron surfaces of any description, n.exc 10 cm in width or girth,including preparation of old steel surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Preparation of new plastered surface of external wall and chajjasand making the surface smooth with sand paper andpriming the surface withon external surface andapplying two coat of oil bound distemper (white or tinted shade) over primed surface including curing complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Material and labour for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed by Engr-in-Charge. |
| 86 | Material and labour for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Material and labour for two coats of white wash on old surface of a wall including preparation of old plastered wall surface complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Material and labour for one coat of white wash on old surface of ceiling including preparation of old ceiling plastered surface complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Material and labour for complete removal of existing treatmentof wall surfaceand applying two coat of oil bound distyemper white or tinted shade with and including priming surfcae with chalk whiteningcomplete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supplying and fixing for 15mm dia bore Galvanised steel water tubing, medium grade with all fittings (ISI Marked), fixed complete concealed to walls, ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge. (Note : Cutting chases for concealed piping shall be measured and paid for separately under respective items). |
| 92 | Supplying and fixing for 15mm dia boresteel water tubing medium grade galvanized (ISI marked) with all fittings short pieces such as and fixed & laid in trenches etc complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supplying and fixing for 20mm bore GI steelwater tubing surface/ concealed, medium grade galvanized with all fittings (ISI Marked) (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floorcomplete all as specified and as directedby Engineer-in-Charge.(NOTE:- Cutting chases for concealed piping shall be measured and paid separately under respective items). |
| 94 | Refixing of Old 20mm dia bore steel water tubing medium grade galvanized (ISI marked) with all fittings such as short pieces & connection asfixed New or old position (walls,celings & floor etc) complete toall as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fixingGalvanised Iron Pipe of size 32mm dia bore size" light grade" (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates)complete all as specified and as directedby Engineer-in-Charge. |
| 96 | Supply and fixing for Stop valve/ Angle valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of size 20mm bore dia as fixed in reapir complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Supply and fixing as in Repair for Stop valve concealed cast copper alloy fancy type cromium plated (ISI Marked) with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe of size 15mm bore dia as fixed in repair complete all as specifed and as directed by Engineer-in-Charge |
| 98 | Supply and fixing as in Repair for Stop valve concealed cast copper alloy (ISI Marked) with long shank and screwed down high pressure with capstan head screwed both ends for iron pipe of size 20mm bore dia as fixed in repair complete all as specifed and as directed by Engineer-in-Charge. |
| 99 | Supply and fixing Bib tap for 15 mm bore dia pipe, brass cast copper alloycromium plated fancy type long body screwed down crutch or butterfly handle with brass furrele and fixed complete all as specifed and as directed by Engineer-in-Charge |
| 100 | Supply and fixing as in Repair Bib tap for 15 mm bore dia pipe, brass cast copper alloycromium plated fancy type long body screwed down crutch or butterfly handle with brass furrele & fixed complete all as specifed and as directed by Engineer-in-Charge |
| 101 | Supply and fixing as in repair for Vitreous china wash hand basin, oval shaped counter sunk white of size 550mm x 400 mm including Vitreous & china pedestel waste pipe, fixed including 32 mm dia bore PVC waste pipe of minimum size 600 mm long and waste coupling (PTMT) of 32mm dia bore (min weight 32mm-45gms)size full thread complete all as specifed and as directed by Engineer-in-Charge. |
| 102 | Supply and fixing for Vitreous china wash hand basin, oval shaped counter sunk white of size 550mm x 400 mm including waste pipe, Vitreouspedestel fixed including 32 mm dia bore PVC waste pipe of minimum size 600 mm long and waste coupling (PTMT) of 32mm dia bore (min weight 32mm-45gms)size full thread complete all as specifed and as directed by Engineer-in-Charge. |
| 103 | Supply & fixed for Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed including supply and fixing ofCP coupling, waste pipe and CP brass spreder andall necessary fittings, complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply & fixed forin repair Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cupscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and complete all specifed and as directed by Engineer-in-Charge. |
| 105 | Supply & fixing for Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cupscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and complete all as specifed and as directed by Engineer-in-Charge. |
| 106 | Supply and fixing for health faucet hand shower 8mm dia of size 1.2 metre long flexible tube with chrome finish & wall hook and wall mounting stand complete all as specifed and as directed by Engineer-in-Charge. |
| 107 | Supply and fixing as in repairBrass chromium Tubular Towel ring , 20mm dia fancy type, superior quality fixed wih chromium plated screw & PVC cleats complete all as specifed and as directed by Engineer-in-Charge |
| 108 | Supply and fixing for Brass chromium Plated Tubular Towel rail ,20mm dia "E-2" type plated of size 60 cm long between flanges fixed wih chromium plated screw & PVC cleats complete all as specifed and as directed by Engineer-in-Charge. |
| 109 | Supply and fixing as in repair Brass Chromium Plated Shower rose 200mm x 200mm size with or without swivel joints, 450mm-550mm long for 5mm boreincluding fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge. |
| 110 | Supply and fixing for 5.50 mm think size bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with stainless steel lamps on cunter complete as in repair all as specifed and as directed by Engineer-in-Charge. |
| 111 | Supply and fixing for Vitreous China squatting pan of orissa pattern, of size 580mmx440mm white with Intergral foot rest & CI ‘P’ or ‘S’ trap, front or back inlet any pattern (including fixing of flush pipe) and making connection to trap and to flushing pipe antisyphonic pipe &demolition of existing pan and as fixed in repair complete all as specified and as directed by Engineer-in-Charge.Note :- P.C.C in bedding shall be measured and paid seperately under respective item of BOQ. |
| 112 | Supply and fixing for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) includingPedestal pan and trap and connection to drain (or outgoing pipe) and to the flushing pipe, antisyphonage pipe, etc.andincluding plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and as directed by Engineer-in-Charge. |
| 113 | Supply and fixing for 75mm dia Bore size PVC (SWR) Junction piece single (Single T), with excess door, equal or unequal bore sizewith or without access door complete all as specified and as directedby Engineer-in-Charge. |
| 114 | Supply and fixing for 75mm dia Bore size PVC (SWR) Junction Double (Double T), with access door or unequal with or without access door complete all as specified and as directedby Engineer-in-Charge. |
| 115 | Supply and fixing as in repair PVC flushing cistern of 10 litres capacity with push button type flush type including PVC connection and integrated Ball Valve, inlet and outlet connections, brackets, PVC flush pipe with bend of size 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and as directed by Engineer-in-Charge. |
| 116 | Supplying and fixing for Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure of PTMT with epoxy coated Aluminium rod and high densitypolythene float ball screwed for iron pipe and including dismantling of existing RCC/ PVC tank of any capacity & refixing of inlet, outlet & over flow pipe complete all as specified and as directed by Engineer-in-Charge. |
| 117 | Supplying and fixing for Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure PTMT with epoxy coated Aluminium rod high density with polythene float ball screwed for iron pipe and including dismantling of existing RCC/ PVC tank of any capacity & refixing of inlet, outlet & over flow pipes complete all as specified and as directed by Engineer-in-Charge. |
| 118 | Supply and fixing in repair PVC (SWR) pipes of size 75mm dia bore, single socketed, in any length with rubber ring joints fixed to walls with suitable clamps complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing in repair PVC (SWR) pipes of size 110mm dia bore, single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed by Engineer-in-Charge. |
| 120 | Supply and fixing in repair PVC (SWR) pipes of size 75mm dia bore, single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed by Engineer-in-Charge. |
| 121 | Supply and fixing in repair 110mm PVC (SWR) bends any radius with or without excess door complete all as specified and as directed by Engineer-in-Charge. |
| 122 | Supply and fixing 75mm dia bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge. |
| 123 | Supply and fixing in repair PVC (SWR) pipes of size 110mm bore, single socketed, in any length with rubber ring joints, fixed to walls or in floors with suitable clamps complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Supply and fixing in repair 75mm dia PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Supply and fixing 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Supply and fixing in repair 75mm dia PVC (SWR) branch piece, Single (Single Y) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Supply and fixing in repair 75mm dia PVC (SWR) branch piece, double (double Y) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 128 | Supply and fixing as repair Soap dish cantabile-clea of sizemmxmmmade out of stainless steel glossy finish fixed to plugs with CP brass screws & Mounted arregements on the wall surface complete all as specified and as directed by Engineer-in-Charge. |
| 129 | Supply & fixed for Sinkmixer without popup waste system with 450mm long braided hoses cast copper alloyfor iron pipes of 15 mm bore, dia sizescrewed for iron pipe and fixed complete all as specified and as directedby Engineer-in-Charge. |
| 130 | Supply & fixed for wallmixer without popup waste system with 450mm long braided hoses cast copper alloyfor iron pipes of 15 mm bore, dia sizescrewed for iron pipe and fixed complete all as specified and as directedby Engineer-in-Charge. |
| 131 | Supply & fixed for 32 mm dia bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 suitable for waste pipe & fixedto walls, ceilings or in floors with neccesary fittings etc complete all as specified and as directed by Engineer-in-Charge. |
| 132 | Supply & fixed PVC grating square shape of size 150mm X 150mm (Hinge pattern and with or without hole)complete all as specified and as directed by Engineer-in-Charge. |
| 133 | Supply and fixing for stainless steel sink with drainage board made of stainless steel sheet of 1mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe with overall size of 915mmx460mm and bowl of size 410mm x 330mm x 160mm including 32 mm dia bore PVC waste outlet pipe of minimum length 600mm completeall as specified and as directed by Engineer-in-Charge. |
| 134 | Material and Labour for Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth ,removing any type of blockage including desilting, descaling & dechockingof drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make the drain line for smooth functionalcomplete all as specifed and as directed by Engineer-in-Charge. |
| 135 | Material and Labour for Cleaning of blocked WC/floor trap/gully trap etc.including and upto first manhole manually and well flushing with clear water, making the seat functional including deposting the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslacked lime on the pitcomplete all as specifed and as directed by Engineer-in-Charge. |
| 136 | Material and labour for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgsif required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed by Engineer-in-Charge. |
| 137 | Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc. including necessary scaffolding up to four storeys height of bldgsif required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed by Engineer-in-Charge. |
| 138 | Supply and fixng for 75mm size long stainless steel fasteners & support, and fixed to walls,complete all as specified & as directed by Engineer-in-Charge. |
| 139 | Supply and fixng for 100mm size stainless steel bright finish designer handle, (heavy duty) fixed with Nut and bolt complete all as specified & as directed by Engineer-in-Charge. |
| 140 | Supply and fixing for of Brass CP suitable for centre hole basis mixer without popup waste system for mixing hot & cold water screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated & crewed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed and as directed by Engineer-in-Charge. |
| 141 | Supply and fixing for PVC connections for pipe of 15mm bore dia size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Material and labour as in repair PVC(SWR) floor trap with dia of outlet in 75 mm dia with grating including jointing with solvent cement complete all as specified and as directedby Engineer-in-Charge. |
| 143 | Supply and fixing in repair 110mm dia bore PVC (SWR) branch piece, double (double Y) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 144 | Supply and fixing in repair 110mm dia PVC (SWR) juction branch piece, single (single T) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 145 | Supply and fixing in repair 110mm dia PVC (SWR) juction piece, double (double T) equal or unequal, provided with oval access door (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. |
| 146 | Supply and fixing for Stop valve/ Angle valve cast copper alloy (ISI Marked) Concealed stop valve screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of size 15mm bore dia complete all as specified and as directed by Engineer-in-Charge. |
| 147 | Supply & fixing for PVC connections of 15mm size with PTMT nuts of length 450 mm complete all as spd and directed |
| 148 | Supply & fixing for stop valve 25 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete all as specified and as directed by Engineer-in-charges. |
| 149 | Material and labour for Plain cement Concrete bed for 150mm dia bore drain pipes including packing under and haunchingagainst the sides of pipes after they arelaid and tested asin Plain cement concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) complete all as specified and as directed by Engineer-in-Charge. |
| 150 | Material and labour for Reinforced cement concrete pipes for size 150mm dia bore of pipe (Class NP-2) confirming to IS-458-2003 as laid in trenches and jointed with collarsincluding testing complete all as specified and as directed by Engineer-in-Charge. Note:- (a)The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified. (b) The pipes shall be measured net as fixed between the fittings and specials, if any, without any allowance for cutting and waste. (c) Fittings and specials shall be measured separately. The rates include for all necessary extra joints, waste, and cutting etc. Excavation, earthwork and concrete work shall be measured & paid separately under respective item of BOQ. |
| 151 | Material and labour for Cutting into existing manholes of 150mm internal dia pipe bore for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l size ( using 20mm graded crushed stone aggerate) for smooth finished, and reforming benching as requiredcomplete all as specified and directed by Engineer-in-Charge. |
| 152 | Material and labour forFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; with 8mm; Sqrane Bars,s; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directedby Engineer-in-Charge. |
| 153 | Material and labour for mild steel TMT bars (Fe-500D) 10mm dia & over cut to length bend to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 154 | Metirial & labour for Mild steelTMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.. |
| 155 | Material and Labour for Roof trusses (framed), purlins, rails and heavy bracket frame (beam, tee, angle, channel or flat section) including distence pecies, cleats etc Fe-290 (Gde E-165)complete all as specified and as directed by Engineer-in-Charge. |
| 156 | Material and Labour for Rolled mild steel plates (plain or chequrered), square cut or notched (ordinary or counter sunk) , forming steel grade conforming toholes etc of Fe-290 (Gde E-165)complete all as specified and as directed by Engineer-in-Charge. |
| 157 | Supply and fixingrolled section conforming to Fe-290 (gde E-165) as in purlins, rafter, rails amd fastenings and have bracket framing (Beam, tee, angle, channel or flat sections ) includingdistance pieces, cleats etccomplete all as specified and as directed by Engineer-in-Charge. |
| 158 | Material and Labour for blow any grade, applied hot,two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film back, 50 micron complete for sunken floor slab and embedded in side wall/covered filletcomplete all as specified and as directed by Engineer-in-Charge. |
| 159 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed by Engineer-in-Charge. |
| 160 | Material & Labour for Complete removal of existing treatment of wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 161 | Material and labour for Rendering 10mm thick in cement mortar 1:3 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 litre in 50 Kg of cement complete all as specified and as directed by Engineer-in-Charge. (Note:- Water proofing compound shall be measured and paid separately under respective items of BOQ) |
| 162 | Material and labour for 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge.(Note : WPC will measured and paid separately under respective item of BOQ). |
| 163 | Material and labour for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified and as directed by Engineer-in-Charge:- (a) Applying 15mm plaster in CM (1:3) mixed with liquid water proofing compound. (b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufactured by the same agency as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under (i) Membrane weight not less than 3.60 Kg/Sqm. (ii)Non woven polyester weight not less than 160 gms/Sqm. (iii)Softening point of membrane not less than 150 degree Celsius. (iv)Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi)Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.(f) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) Type B-0 Complete. (g) Applying two coat of bitumenous aluminium paint on finished top surface |
| 164 | Supply only Polymer liquid water proofing compound of approved make @0.20liters for 50 kg of cement as per manufactured instructions complete all as specified and as directed by Engineer-in-Charge. |
| 165 | Supply and fixing for Pre- painted galvalume alumunium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Supply and fixing for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpaas in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge. |
| 167 | Supply and fixing for 1mm thick Plain, galvanised, mild steel sheetingas inridges,hips, valley gutters, drip and straight flashing (length and girth as fixed)with grade of zinc coating 275 including dismantelling of existing valley/gutter etc complete all as specified and as directed by Engineer-in-Charge. |
| 168 | Material and labour for False ceiling of 9.5mm thick gypsum tiles of size 600mmx600mm laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600mmx600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and as directed by Engineer-in-Charge. |
| 169 | Disconnecting existing PVC tanks, setting aside (or lowering if required) for repair, cleaning and removing all scale and dirt by using bleaching powder from tank and from mouth of circulating pipes etc and hosting if required reconnecting and refixing in position of capacity 500 liters but not exceeding 1000 ltrs and making good for running of water from tankto inside of bldgs and letter writing of date of cleaning and due on withsynthetic enamel paint and complete all as specified and as directed by Engineer-in-Charge. Note : Bleaching powder and like by item shall deem to beincluded in the quoted rate of this item. |
| 170 | Material and Labour for taking down existing Aluminium door/window and refixing inthe same opening after repairing, easing and adjusting includingreplacement of damaged hinges, brass mortice lock, sheet glass, door closer, Elco Panel , floor spring, rubber neoprene packing, aluminium beading, glazing clips and SS screws complete as specified and as directed by Engineer-in-Charge. Note:- (Mortice lock, sheet glass, hydraulic door closer, floor spring and composit of panelshall be measured and paid seperately under respective item of BOQ. |
| 171 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed by Engineer-in-Charge |
| 172 | Material and labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor as earth wire drawn through and including concealed PVC conduit (ISI Marked) of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box of 1100 volts grade includingsheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible) (With proper colour code will be used for wiring as per the electrical rule),for one light point controlled by one way 6 Amp/10Amp switch single pole, 240 voltscomplete all as specified and as directed by Engineer-in-Charge (Note : Switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) |
| 173 | Material and labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor as earth wire drawn through and including concealed PVC conduit (ISI Marked) of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box of 1100 volts grade includingsheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible) (With proper colour code will be used for wiring as per the electrical rule),for one multi 5 Pin socket, 6Amp independent 230 voltscomplete all as specified and as directed by Engineer-in-Charge (Note : Switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) |
| 174 | Material and labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor as earth wire drawn through and including concealed PVC conduit (ISI Marked) of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box of 1100 volts grade includingsheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible) (With proper colour code will be used for wiring as per the electrical rule),for one multi 5 Pin socket, 5Amp on the same board, 230 voltscomplete all as specified and as directed by Engineer-in-Charge (Note : Switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) |
| 175 | Material and labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor as earth wire drawn through and including concealed PVC conduit (ISI Marked) of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box of 1100 volts grade includingsheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible) (With proper colour code will be used for wiring as per the electrical rule),for one bell/buzzer point controlled by one bell push complete all as specified and as directed by Engineer-in-Charge (Note : Switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) |
| 176 | Material and labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor as earth wire drawn through and including concealed PVC conduit (ISI Marked) of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box of 1100 volts grade includingsheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible) (With proper colour code will be used for wiring as per the electrical rule),for one light point controlled by two way switch, 6 Amp/10Amp with cable of size 1.5 sqmm size complete all as specified and as directed by Engineer-in-Charge. (Note : Switch/bell push/fan regulator etc shall be measured and paid separately under respective items.) |
| 177 | Material and labour for point wiring using FRLS PVC insulated unsheathed/multi stranded copper conductor cable 1.5 sqmm including 1.5 sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20mm dia and 1.8 mm thick including all fittings viz tees, bends, juction box including sheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc for one ceiling/exchast fan point controlled by one switch single pole, one way,16 Amp/10 Amp, 230 volts connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles of pin/u type etc (conduit shall be fixed on surface of ceilng with necessary saddles where concealing of conduit is not feasible), complete all as specified and as directed by Engineer-in-Charge.(Note : Switch/Socket etc shall be measured and paid separately under respective items.) |
| 178 | Material and labour for point wiring using FRLS PVC insulated unsheathed/multi stranded copper conductor cable 2.5 sqmm including 2.5 sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20mm dia and 1.8 mm thick including all fittings viz tees, bends, juction box including sheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc for one 3 pin socket outlet, 15 Amp multi purpose independent point controlled by 16 Amp, switch,single pole, one way 230 volt for socket connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles of pin/u type etc (conduit shall be fixed on surface of ceilng with necessary saddles where concealing of conduit is not feasible), complete all as specified and as directed by Engineer-in-Charge.(Note : Switch/Socket etc shall be measured and paid separately under respective items.) |
| 179 | Material and labour for point wiring using FRLS PVC insulated unsheathed/multi stranded copper conductor cable 4 sqmm includin 4 sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20mm dia and 1.8 mm thick including all fittings viz tees, bends, juction box including sheet steel/GI terminal box of adequate size having thickness not less than 2.0mm thick including 3mm thick bakelite sheet cover for mounting of switch/socket etc for one 3 pin socket outlet, 15 Amp multi purpose independent point controlled by 16 Amp, switch,single pole, one way 230 volt for socket connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles of pin/u type etc (conduit shall be fixed on surface of ceilng with necessary saddles where concealing of conduit is not feasible), complete all as specified and as directed by Engineer-in-Charge.(Note : Switch/Socket etc shall be measured and paid separately under respective items.) |
| 180 | Material and labour for Submain wiring with 2 run of single core, 2x6 sqmm FRLS PVC insulated and unsheathed, multi strandedcopper conductor cable 1100 volts FRLS (usingcolour code as per IS)with and including 1 x 6 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable (usingcolour code as per IS) connectedtocommon earth point and connectedto earth dolly drawn through and Including concealed PVC rigidconduit of 25mm bore dia size, heavy grade (ISI marked) having thickness not less than1.8mm with and including all accessories, complete including taking down old submain wiring (any type any size) complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of single core cable with one run of earth cable and conduit shall be measured as one RM. |
| 181 | Supply and fixing for Modular Switch 1 way 6/10A,1 module single pole, 240 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 182 | Supply and fixing for Modular Bell push 6Amp, 1 module single pole, 230 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 183 | Supply and fixing for Modular Switch 16Amp,1module single pole, 230 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 184 | Supply and fixing for Modular Switch 2 way 6Amp,1module single pole, 230 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 185 | Supply and fixing for Modular Socket 6Amp-2./3 pin combined ,2module , 230 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 186 | Supply and fixing for Modular Socket-6Amp/16Amp, 6 pin combined 2module, 230 volts (ISI marked) complete all as specified and as directed by Engineer-in-Charge. |
| 187 | Material and labour for Modular power unit with 25 Amps, MCB single pole and nuetral suitale for 230 volts & Plug for geyser complete all as specified and directed by Engineer-in-Charge. |
| 188 | Supply and fixing for Ceiling rose polycarbonate isolated body surface bakelite not less than 65mmx50mm dia three terminals complete all as specified and as directed by Engineer-in-Charge. |
| 189 | Supply and fixing for Ding dong door bell electric suitable for AC 230 Volt, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 190 | Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 9 Watt, B-22 holder base with polycarbonate body & aluminimum of approved make and Cat part No and PVC round/square block etc complete all as specified and as directed by Engineer-in-Charge. |
| 191 | Supply and fixing for decorative wall mounting LED bed side fiting of 3 watt, 3000khaving flexible neck and mounting arrangement to fix on the wall surfacer or like & situation with suitable screws etc complete all as specified and as directed by Engineer-in-Charge. Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 192 | Supply and fixing for LED lightfitting1X20 watt, 230 volts, AC decorative box type 4 feet with driver, holder including LED tube light,230 volts, ACconnecting up with three core flexible copper conductor cable of sutiable size from ceiling rose to fitting completeall as specified and as directed by Engineer-in-Charge.Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 193 | Supply and fixing forLED light fitting mirror type of capacity 10 watt, 230 volts, AC with high out put diffuser 2 feet,decorative type with drive hold including LED lamp & connecting up with three core flexible copper conductor cable of suitable size completeall as specified and as directed by Engineer-in-Charge. Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 194 | Supply and fixing forLED light fitting 1x9W/1x10W bulk head luminaires including LED light drives holder connectingup with three core flexible copper conductor cable of suitable size completeall as specified and as directed by Engineer-in-Charge.Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 195 | Taking down ceiling fan by disconnecting the electric connection and dismantling the blades and removing from ceiling/roof of bldg by descrewing the nut,bolt and deposited to MES store Yard complete all as specified and as directed by Engineer-in-Charge. |
| 196 | Supply and fixing of 5 star rated BLDC (Brush less direct current motor) ceiling fan 230 volts, single phase of 1200mm sweep double ball bearing type with minimum air delivery 210 CMM & service value shall not be less than 6.0 B.E.E (five star rated ) including blade, down rod and canopy cover etc and including connecting with 3 core flexible copper conductor cable of size 0.50 sqmm and including writing of MES No with black synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 197 | Supply and fixing of ceiling fan regulator electronic 120 Watt, socket type in size, suitable for 1200mm/1400mm sweep double ball bearing 5 star rated BLDC (Brush less direct current motor)type ceiling fan complete all as specified and as directed by Engineer-in-Charge. |
| 198 | Taking down Exhaust fan by disconnecting the electric connection and dismantling the blades and removing from wall of the respective bulding by descrewing the nut,bolt etc and deposited to MES store Yard complete all as specified and as directed by Engineer-in-Charge. |
| 199 | Supply and fixing for exhaust fan, steel body AC single phase. 230 Volts of size 300mm sweep with MS blades and frame and louvers including grouting nut bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 200 | Supply and fixing of heavy duty of 250mm sweep, double ball bearing copper wounded made out of sturdy engineering plastic exhaust fan AC single phase 230 Volts having 1200+/-50RPM and power consumption not more than 50 watt with minimum air delivery 700 CMH including box type square shaped made out of sturdy engineering plastic louvers alongwith sturdy engineering plastic flaps and fixed with grouting nut bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 201 | Supply and fixing for LED luminaire 600 mm x 600 mm ,35watt /36 watt, 220 AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specifed and as directed by Engineer-in-Charge.Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 202 | Supply and Fixing of LED bldg security light fitting 25 Watt (IP-66 Protection) bulk head, energy efficient,wall mountedpressure die cast aluminium housing and enclosed with polycarbonate cover with all accessories and clear prismatic diffuser CCT 5700K+/-300K complete with LED 25 watt lamp & all accessories and including connecting up with three core twisted flexible copper conductor cable of 1.5 Sqmm size from ceiling rose,etc drawn through and including 32mm bore GI light grade protecion Pipe upto 1.0m length with suitable fixing accessories on walls, completeall as specified and as directed by Engineer-in-Charge. Notes :- 1. CCT (Colour Corelated temprature) of fixture shall be 3000K. 2. System Lumen Efficacy shall be > 100Lm/W 3. The defect liability period of LED light shall be 02 years from the certified date of completion & the Contractor shall replace/repair the defective fitting within 07 Days after handing over to Contractor for replacement /repair 4. CA No shall be written on each fitting before installation. |
| 203 | Supply and fixing for 240 Volt, 10 KA, "B" curve miniature circuit breaker (MCB) of single pole with current carrying capacity of6 Amp to 32 Amp, in the MCB DB complete all as specified and as directed by Engineer-in-Charge. |
| 204 | Supply and fixing for 240 Volt, 10 KA, "B" curve miniature circuit breaker (MCB) of single pole with current carrying capacityof 40 Amp, in the MCB DB complete all as specified and as directed by Engineer-in-Charge. |
| 205 | Supply and fixing for 240 Volt, 10 KA, "B" curve miniature circuit breaker (MCB) of single pole withcurrent carrying capacityof 63 Amp, in the MCB DB complete all as specified and as directed by Engineer-in-Charge. |
| 206 | Supply and fixing for 240 Volt, 10 KA, "C" curve miniature circuit breaker (MCB), single pole neutral (SPN) of40 Amp current carrying capacity 10k in the MCB DB complete all as specified and as directed by Engineer-in-Charge. |
| 207 | Supply and fixing for 240 Volt, 10 KA, "C" curve miniature circuit breaker (MCB) of single pole neutral (SPN) of63 Amp current carrying capacity 10k in the MCB DB complete all as specified and as directed by Engineer-in-Charge. |
| 208 | Supply and fixing forsheet metal enclosures factory made DB double door SPN 12 way 230 Volts AC, 50 Hz AC with 200 Amp rated copper bus bar and polyurethrene gasket as in repaircomplete as specified and as directed by Engineer-in-Charge. |
| 209 | Supply and fixing for single pole and neutral 8 way, factory made sheet metal enclosures DB double door230 Volts AC, 50 Hz AC with 200 Amp rated copper bus bar and polyurethrene gasket including taking down old unserviceable DB complete as specified and as directed by Engineer-in-Charge. |
| 210 | Supply and fixing for single pole andNeutral 4 way, factory made sheet metal enclosuresDB double door 230 Volts AC, 50 Hz AC with 200 Amp rated copper bus bar and polyurethrene gasket including taking down old unserviceable DB complete as specified and as directed by Engineer-in-Charge. |
| 211 | Material and labour for cuting hole in brick/stone masonary wall and provision of PCC (1:3:6) type C-0 (using 12.5mm gradedcrushed stone aggregate) for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan complete all as specified and as directed by Engineer-in-Charge.Note : (i) RATES ARE DeemedTO BE INCLUDED TO MAKING THE CUTTTING HOLE SMOTHLY AND COLOUR WASH AS PER EXISITING COLOUR. (ii) RATES ARE DeemedTO BE INCLUDING CHARGES OF HIRING T & P, i.e LEDDER SQUARE FOLDING AND INSURANCE OF LABOUR DEPLOYED, BEING HOLES ARE MADE TO BE AT MUTLISTORAGE BLDGE OF DIFFERENT HEIGHT.contractor shall take all kind of security meaures for the safty of the workers.no claims whatsoever shall be entainable on this account at the later stage. |
| 212 | M&L for distribution board iron clad vertical TPN at letter stage DB double door made out of CRCA power coated sheets with IP-65 protection and mechanical strength as IK-09 suitable for MCCB as incomer and MCB as outgoing 415V 3 Phase 50Hz 4 way complete with appropriate size of copper bus bar and neutral link complete with one MCCB 4 pole 415 V 100 Amps rating, 16 KA with fixed thermal and fixed magnetic release of the same make as of distribution board complete all as specified and as directed by Engineer-in-Charge. Note: (MCBs shall be measured and paid separately under respective items) |
| 213 | Material and labour for distribution board iron clad vertical TPN (Triple pole& neutral) (VTPN) DB double door made out of CRCA power coated sheets with IP-65 protection and mechanical strength as IK-09 suitable for MCCB as incomer and MCB as outgoing 415V 3 Phase 50Hz 4 way complete with appropriate size of copper bus bar and neutral link complete Including MCCB 415 V, 63 Amps rating, 16 KA as incomer & 16 Nos MCB SP of capacity upto 63 AMP as outgoing with fixed thermal and fixed magnetic release of the same make as of distribution board complete all as specified and as directed by Engineer-in-Charge. Note: (MCBs shall be measured and paid separately under respective items) |
| 214 | Material and labour for Earthing complete with Galvanised steel earth plate electrode of size 600 mm x 600 mm and 6 mm thick burieddirectlyinground (earth pit notless than 2.25 m deep below GL) with top edge of the plate not less than 1.5 mbelow the normal groundlevelconnecting toGalvanized earth leadwire 4.00mm diaby means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth lead protected byprovision of GI medium grade pipe 15mm bore dia including 40mm thick cover of RCC M -15 Type B-1 (using 20mm graded crushed stone Aggregate) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made of shape, GI medium grade 20mm borepipe for watering of suitable length placed on top edge of earth plate, common salt and charcoal filling, with fixing arrangements, funnel, wire mesh and earth work in any type of soil or all kind of soil including returning filling in and removal of surplus soil to a distance not exceeding 50 metre complete all as per plate No 03 of SSR-2009 Part-I (specification) and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and as directed by Engineer-in-Charge |
| 215 | Supply and fixing of eiectric stainless steel commercial chimney of cap 3500 CFM of size 6 feet hood and size 2 feet length (30 inch in length each with BLDC motor of suitable size) with LED light, pufreted filter complete along with fixing with help of ankle bolt complete all as specified by manufacuture and making hole for flexible exhaust pipe through cutting of wall and making outlet at outside the kitchen area complete all as specified and as directed by Engineer-in-Charge. |
| 216 | Supply and fixing of food warmer stainless steel body, wheel mounted along with hole for fixing of 4 Nos hot pan (20 Kg, each with heating element-02 Nos (2KW) with and electric wiring for autocut off and filling of hot water bottom portioncomplete all as specified and as directed by Engineer-in-Charge. |
| 217 | Supply, Installation , testing and commisioning of Heavy Dutty Package Air Cooling Units, PAC 20 Top/Down (Universal) Dischargecomprising of following of 20000CMH (10000 CFM) Capacity Complete all as specified as directed by Engineer-in-Charge. a) 4” inch thick imported high efficiency cellulose pads on 4 sides. b) Optimized single-phase motor and fan to deliver the powerful airflow c) Water pump in wet section, Cool Flow Dispanser for better cooling, auto connection of water tank to quick fill, water connection with ball valve, drain and overflow connection. d) Weather Resistant Engineering Plastic Body with dust filter e) Power Consumption of 1.1 kw : Note : Drawing and line diagram of each item along with technical specification should be approved from Accepting officer before execution of work /material provided. |
| 218 | Supply, Installation testing and commisioning of heavy Dutty Package Air Cooling Units, PAC 25 Top/Down (Universal) Discharge comprising of following of 25000CMH (15000 CFM) Capacity Complete all as specified as directed by Engineer-in-Charge. a) 4” inch thick imported high efficiency cellulose pads on 4 sides. b) Optimized 3-phase motor and fan to deliver the powerful airflow c) Water pump in wet section, Cool Flow Dispanser for better cooling, auto connection of water tank to quick fill, water connection with ball valve, drain and overflow connection. d) Weather Resistant Engineering Plastic Body with dust filter e) Power Consumption of 1.5 kw.Note : Drawing and line diagram of each item along with technical specification should be approved from Accepting officer before execution of work /material provided. |
| 219 | Supply, Installation testing and commisioning of Heavy Dutty Package Air Cooling Units, PAC 8 Top/Down (Universal) Discharge comprising of following of 8000CMH (4500 CFM) Capacity Complete all as specified as directed by Engineer-in-Charge. a) 4” inch thick imported high efficiency cellulose pads on 4 sides. b) Optimized single-phase motor and fan to deliver the powerful airflow c) Water pump in wet section, Cool Flow Dispanser for better cooling, auto connection of water tank to quick fill, water connection with ball valve, drain and overflow connection. d) Weather Resistant Engineering :Plastic Body with dust filter e) Power Consumption of0.45 kw Plastic Note : Drawing and line diagram of each item along with technical specification should be approved from Accepting officer before execution of work /material provided. |
| 220 | Material & labourfor Sub main wiring inthree single run FRLS PVC insulated cable 6 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 6 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity Complete all as specified as directed by Engineer-in-Charge. |
| 221 | Supply, Installation & testing of G I Ducting of size 24 gaugeFABRICATED out of GI Flanges,with supports as perengineering design Complete all as specified as directed by Engineer-in-Charge. |
| 222 | Supply, Installation & testing of G I Ducting of size 22 gaugeFABRICATED out of GI Flanges,with supports as perengineering design Complete all as specified as directed by Engineer-in-Charge. |
| 223 | Supply, Installation & testing of AVS GRILL WITH DEMPERwith supports as per engineering design complete all accessories Complete all as specified as directed by Engineer-in-Charge. |
| 224 | Supply, Installation & testing of 9 mm Insulationwith supports as per engineering design complete all accessories Complete all as specified as directed by Engineer-in-Charge. |
| 225 | Supply, Installation & testing of Starter Panel Protector Only for 25000 CMH as per manufactiuer design Complete with supports as per engineering design complete all accessories Complete all as specified as directed by Engineer-in-Charge. |
| 226 | Material & labourforin replacement of modular power unit with 25 Amps MCB single pole & nutral Plug for AC & Water Refrigetor & Deep freezerComplete all as specified as directed by Engineer-in-Charge. |
| 227 | Material & labourfor in replacement of modular power unit with 25 Amps MCB three phase with neutral & Plug for air cooling unit Complete all as specified as directed by Engineer-in-Charge. |
| 228 | Supply ,installing testing and commissioning of Water coolerelectric driven single phase , 230 volt AC supply energy efficient star rated with CFC free refrigerant with approximate for storage capacity of 80 ltr complete and cooling capacity of 40 ltr Complete all as specified as directed by Engineer-in-Charge.. |
| 229 | Supplyand fixed Voltage stabilizer for automatic operation , single phase designed for input variation from 170 volt to 250 volt with output voltage stablized at 230 Volt having capacity 3 KVA Complete all as specified as directed by Engineer-in-Charge. |
| 230 | Supply and Installation ofrefrigerators, double door, electric driven (single phase) with high /low voltage autocut off for capacity 310 litres frost free with CFC free refrigerant, energy efficient with and 5 star rated Complete all as specified as directed by Engineer-in-Charge. |
| 231 | Supply and installed refrigerators, double door, electric driven (single phase) with high /low voltage autocut off for capacity 410 litres frost free with CFC free refrigerant, energy efficient with 5 star rated Complete all as specified as directed by Engineer-in-Charge. |
| 232 | Supply and Installation Deep Freezer, glass top , double door, electric driven (single phase 230 volt 50 Hz), complete all as specified and directed. capacity 320litres frost free with CFC free refrigerant, energy efficient and 5 star rated Complete all as specified as directed by Engineer-in-Charge. |
| 233 | Supply and fixing & Installation of voltage stabilizer automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 volt to 250 volt with output voltage stabilised at 230 volt with accuracy +/- 2.5% and of capacity5 KVA Complete all as specified as directed by Engineer-in-Charge. |
| 234 | Supply and fixing Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 10 KVA Complete all as specified as directed by Engineer-in-Charge. |
| 235 | Supply and fixing for 3 layer ( inner antimicrobial, outer UV stabilized) (ISI marked), conforming to IS-15801, PPR pipes, SDR 7.4 (PN-16) and PPR plain fittings in trenches/walls/cellings or laying in floors complete fixing of size 20mmdia (outer) Complete all as specified as directed by Engineer-in-Charge. |
| 236 | Supply and fixing of stop valve of PTMT any color high pressure screwed for iron pipe & fixed (minimum weight for 20mm-112gms) complete with connection as per requirement of the site Complete all as specified as directed by Engineer-in-Charge. |
| 237 | Supply and fixing air cooled hi wall split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated ,cordless reomote control unit with inbuiltall weather (heating & cooling ) and copper tube with digital invertor twin rotary Complete all as specified as directed by Engineer-in-Charge. |
| 238 | Supply and fixing room window type airconditioner electric driven with inbuilt (single phase)of cooling capacity 1.5tonne, 4500 K Cal per hour BEE 5 star rated all weather (heating & cooling) & copper tube with digitel invertor twin rotary Complete all as specified as directed by Engineer-in-Charge. |
| 239 | Supply , installation, commissioning and testing of Air Cooled Packaged Air Conditioners, comprising of Hermetic/Semi - Hermetically sealed Reciprocating or Hermetically sealed Scroll Compressors with microprocessor based control, including copper refirgerant piping, electrtical interconnection between indoor and outdoor units , suitable for operation on R - 22/R - 407c/R - 410a refrigerants suitablefor operation on 3 phase AC electric supply, including water pump sets, cooling tower, ducting , plumbing etc capacity 22500k cal per hour(7.5 to 8.75 TR) or nearest size Complete all as specified as directed by Engineer-in-Charge.Note : Drawing and line diagram of each item alongwith technical specification should be approved from Accepting officer before execution of work /material provided on the site. |
| 240 | Supply, Installation and commissioning of Cu, refrigerant pipes (required as per OEM design) duly insulated with 19mm/13mm close cell elastomeric nitrite rubber insulation between each set of outdoor and indoor units of size 22.2mm dia with 19mm thick insulation Complete all as specified as directed by Engineer-in-Charge. |
| 241 | Supply, Installation and commissioning of Cu, refrigerant pipes (required as per OEM design) duly insulated with 19mm/13mm close cell elastomeric nitrite rubber insulation between each set of outdoor and indoor units of size 15.9mm dia bore with 1mm thick insulation Complete all as specified as directed by Engineer-in-Charge. |
| 242 | Supply, Installation, testing and commissioningof PVC pipe (for drainage of water from IDU with 6mm thick Nitrile Rubber insulationof size 25mm dia bore drain PipeComplete all as specified as directed by Engineer-in-Charge. |
| 243 | Supply, Installation, testing and commissioningof PVC pipe (for drainage of water from IDU with 6mm thick Nitrile Rubber insulationof size 32mm dia bore drain pipe Complete all as specified as directed by Engineer-in-Charge. |
| 244 | Supply & Laying of Cu conductor shielded flexible Communication cabling between ODU and IDU as per OEM Specification& Cable shall be laying through medium Complete all as specified as directed by Engineer-in-Charge. |
| 245 | Supply & Filling of First charge of Refrigerant R410a gas filling Complete all as specified as directed by Engineer-in-Charge. |
| 246 | Supply & Erection of Site Fabricated galavanised iron ducting as per IS : 277 with galavanised iron threaded rod hanger and MS channel support of size 24 gauge galavanised iron Sheets Complete all as specified as directed by Engineer-in-Charge. |
| 247 | Supply & Erection of Site Fabricated galavanised ironducting as per IS : 277 with galavanised iron threaded rod hanger and MS channel support of size 22 gauge galavanised ironSheets Complete all as specified as directed by Engineer-in-Charge. |
| 248 | Supply & Fixing of Duct Thermal Insulation with 19mm thick Aluminium foil face Nitrile Rubber Insulation Complete all as specified as directed by Engineer-in-Charge. |
| 249 | Supply & Fixing of Duct Thermal Insulation with 10mm thick Aluminium foil face Nitrile Rubber Insulation Complete all as specified as directed by Engineer-in-Charge. |
| 250 | Supply & Fixing of Aluminium power coated & Supply air Diffuser/Grills with MS Collar Complete all as specified as directed by Engineer-in-Charge. |
| 251 | Supply & Fixing of Aluminium powder coated Return air Diffuser/Grills withoutMS Collar Damper Complete all as specified as directed by Engineer-in-Charge. |
| 252 | Supply & Fixing of Mild steel Volume Control Damper Complete all as specified as directed by Engineer-in-Charge. |
| 253 | Supply, installation, testing and commissioning of ‘Solar Water Heating System’ with stainless steel material of grading SS304L grade tank with insulated for heat resistance, Evacuated tube collector with thermo-syphon system , stand and support based on direct transferring of heat of capacity 500 LPD with electric back up suitable of watt heater as per recommadation of manufacturer specification Complete all as specified as directed by Engineer-in-Charge. |
| 254 | Supply & fixing 3- layer PP-R Polypropylene random copolymer concealed pipes of size 25mm dia boreSDR 7.4 (PN16) UV stabilized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings as in trenches or ground in wall surfaces with and including all fitting Complete all as specified as directed by Engineer-in-Charge. Note: Connection shall be carried out in mixer tap paid separately. |
| 255 | Material and labour for cutting of existing GI/CI pipe line of size 50mm/80mm/100mm dia pipe making new connection including short pieces , inserting tees, bends ,sockets, unionetc with existing water line Complete all as specified as directed by Engineer-in-Charge. |
| 256 | Material and labour for Submain wiring with 2 run of single core, 2x4 sqmm FRLS PVC insulated and unsheathed, multi strandedcopper conductor cable 1100 volts FRLS (usingcolour code as per IS)with and including 1 x 4 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable (usingcolour code as per IS) connectedtocommon earth point and connectedto earth dolly drawn through and Including concealed PVC rigidconduit of 25mm bore dia size, heavy grade (ISI marked) having thickness not less than1.8mm with and including all accessories, complete including takingComplete all as specified as directed by Engineer-in-Charge. Note : Two runs of single core cable with one run of earth cable and conduit shall be measured as one RM. |
| 257 | Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 Star rated, vertical type, thermally insulated Mildsteel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temprature adjustable knob includingsteel braided flexible connection for pipe of size 15 mm dia bore with G.I hexagonal adopters / Nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and includingprovision of wall mounting arrangment and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation Complete all as specified as directed by Engineer-in-Charge. |
| 258 | Supply and Fixing Single pole and neutral MS sheet metal enclosure with a two pin and earth plug and socket comprises one single pole 20 Amp MCB AC 240 volts Complete all as specified as directed by Engineer-in-Charge. |
| 259 | Supply and Fixing single pointed air termination aluminium rod of 12mm dia,300 mm longwith two holes drilled alongwith suitable nuts and bolt for fixing with clamp Complete all as specified as directed by Engineer-in-Charge. |
| 260 | Supply and Fixingfor GI pipe medium grade of size 40 mm dia duly two holes drilled for holding of air terminal Aluminium rod with all fittings Complete all as specified as directed by Engineer-in-Charge. |
| 261 | Supply and Fixingfor aluminium strip of size 25mmx3.15mm complete with PVC shaddle and fixing screw for roof conductor/down conductor above ground upto test points Complete all as specified as directed by Engineer-in-Charge. |
| 262 | Material and labour for Earthing complete with Galvanised steel earth plate electrode of size 600mm x 600mm and 6mm thick burieddirectlyinground (earth pit notless than 2.25 m deep below GL) with top edge of the plate not less than 1.5 mbelow the normal groundlevelconnecting toGalvanized earth leadof copper strip of size 20mm x 3mmby means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth lead protected byprovision of GI medium grade pipe 15mm bore dia including 40mm thick cover of RCC (1:2:4) Type B-1 (using 20mm graded crushed stone Aggregate) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made of shape, GI medium grade 20mm borepipe for watering of suitable length placed on top edge of earth plate, common salt and charcoal filling, with fixing arrangements, funnel, wire mesh and earth work in any type of soil or all kind of soil including returning filling in and removal of surplus soil to a distance not exceeding 50 metre complete all as per plate No 03 of SSR-2009 Part-I (specification) and connecting to earth test point all as specified or indicated including testing on completion Complete all as specified as directed by Engineer-in-Charge. |
| 263 | Metirial & labour for Earthing complete with using copper plate electrode 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using galvanised iron of size 32mmx6mm as earthing lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 40 mm dia GI light grade from upper end of earth plateupto external faceof the wall of the building including 20 mm dia bore GI pipe medium grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia@ 150 mm c/c both ways with 10 mm dia mild steel bars as in liftinghandle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt). |
| 264 | Supply & fixing fortest point terminal block made of gun matel or phosphorus bronze of size 75mmx75mmx 25mm ,drilled andscrewed including 3 Nos. 8mm dia 25mm long hex. head screw Complete all as specified as directed by Engineer-in-Charge. |
| 265 | Material and labour for Copper strip of size 32mm x 6 mmfor earth buried in ground Complete all as specified as directed by Engineer-in-Charge. . |
| 266 | Supplying and fixing for 15mm dia bore Galvanised steel water tubing, medium grade with all fittings (ISI Marked) and fixed complete concealed to walls, ceiling or laid in floors Complete all as specified as directed by Engineer-in-Charge. |
| 267 | Material and labour forfor cutting existing GI pipe line of size 40mm/25 mm dia pipe making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, unionetc with existing water line Complete all as specified as directed by Engineer-in-Charge. |
| 268 | Material and labour forgood quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clase 19.75 of MES Schedule part-I (2009)Note :Sand shall be fined sand as specifed and punned thickness shall be measured Complete all as specified as directed by Engineer-in-Charge. |
| 269 | Material and labour forfor Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required Complete all as specified as directed by Engineer-in-Charge. |
| 270 | Supply and laying reinforced precast factory made (ISI Marked) concrete cable cover HV, Type1, flat, size 300mmx180mmx40mm Complete all as specified as directed by Engineer-in-Charge. |
| 271 | Material and labour for replacement of GI tubing "light grade" of 40 mm diaborefor passing through cables under the floor ,inside the wallComplete all as specified as directed by Engineer-in-Charge.Note:- Cutting of PCC and fixing of pipe under PCC shall be included in quoted rate ofthis item. |
| 272 | Material and labour for replacement of GI tubing "light grade" 50 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed by Engineer-in-charge. |
| 273 | Supply and fixingStay assembly completefor stay rod of diameter 20mm with accessories as shown in electrical plate No. 1complete all as specified and as directed by Engineer-in-Charge. Note:- loop type insulator, stay clamps, excavation and concrete shall bemeasured& paid separately under respective item of BOQ. |
| 274 | Material and labour for galvanized stay strand of size 7mm/4 mm complete all as specified and as directed by Engineer-in-Charge. |
| 275 | Material and labour for loop type insulator large size with overall dimensions 90mmx140mm with clearance of hole 25.5 mm of vitreous white brown or green complete all as specified and as directed by Engineer-in-Charge. |
| 276 | Material and labour for Switch air break, gang operated, triple pole with drop out fuses and 12 insulators for outdoors, mechanically operated mounted on insulator and MS channels frame, with operating mechanism 25 mm dia G.I medium grade pipeworked from ground level with locking arrangement for current rating 200 Amps, 11 KV including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 277 | Supply and fixing of Cross arms, bracing, supports clamps and back plates, fabricated from structural steel sections incl nuts, bolts, washer, welding, bending cold or hot, drillingholes for bolts, in any shape or size as indicated or directed incl one primer, one under coat and one finishing coat of aluminium paint over prepared steel surface Complete all as specified as directed by Engineer-in-Charge. |
| 278 | Supply & fixing of Anti - climbing devicecomprising of 2.24 mm dia galvanised steel 2-strand barbed wire with 2.00mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 metre clamped and properly secured or as orderedcomplete all as specified and as directed by Engineer-in-Charge. Note:- Clamps shall be measured and paid seperatly |
| 279 | Supply and fixing HT lightening arrestor metal oxide type (gap less) heavy duty single pole suitable for rated system voltage of 12 KV and working rated arrestor voltage of 9 KV with normal discharge current of 10 KA complete with all fitting transmission class, discharge capacity 10 kilo Amp all as per IEC 99.4 effectively connected with earthy system complete all as specified and directed by Engineer-in-Charge. Note:- Test certificate for lighting arrestor shall be supplied by the contactor. |
| 280 | Supply laying & testing of cable of XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) with stranded aluminium conductor of 11000 volt grade, of size95 Sqmm3 core Complete all as specified as directed by Engineer-in-Charge.(Note:- (a) Excavation, earth work, sand cushioning concrete cable covers,protection of pipe shall be measured and paid saperately). |
| 281 | Metirial & labour for cable jointing kit for 11KV (Earthed) gradedcable for outdoor termination heat shrinkable type joint complete with jointing metirial & accesorries suitable for 3 crore XLPE armoured aluminium conductor cable of size95 Sqmm Complete all as specified as directed by Engineer-in-Charge.(Note:- (a) Excavation, earth work, sand cushioning concrete cable covers,protection of pipe shall be measured and paid saperately). |
| 282 | Supply & fixing in replacement of steel tubular swaged poles complete with iron base plate, bolts, nuts & screws as specified type 410 SP-55 (11 metres long) including painting with anti corrosive paint internally complete and externally up to planting depth, alternative green & white strips of 30 cm width upto 1.5 mtr above ground level, balance length to be painted with two coats of aluminium paint externally with pole numbering all as required at site or complete all as specified and as directed by Engineer-in-Charge. Note: (Earth work and PCC will be measured and paid separately under respective items). |
| 283 | Supply, installation, testing and commissioning step down 11/0.433 KV (at no load)transformer 3 phase, 4 wire AC, 50 cycles, 200 KVA copper wound, outdoor type, EE level -3 with latest as per IS-1180, with offload manual tap changing arrangement (gear type) on HT side to vary secondary voltage up to Minus 7.5% to Plus 7.5% for 7 steps @ 3% including suitable cable entry boxes on both sides to recive HT and LT cables complete in all respect with standard accessories and fitments connection complete all as specified and directed. Temperature of oil shall not rise to 35 Degree centigraded to ambient and 40 Degree centigrade of winding . Transormer shall be painted with two coats of smoke grey epoxy paint conforming to IS:632.Note:- (a) Transformer shall be oil immersed naturally/self cooled (ONAN) with external cooling tubes/radiator, double wound, copper winding, core type, MS radiater cooled tank complete with first fill of transformer oil of dielectric strength not less than 60 KV as per IS-335 with test certificate and Star BEE level following :-(i) Rating and diagram plate.(ii) Lifting Lugs.(iii) Air release vent with plug.(iv) conservator with oil indication.(v) Mild steel wheel with oil indication.(vi) Silica gel breather assembly with first filling of silica gel.(vii) Oil temperature gauge and washout plug.(viii) Complete with under/over voltage cut off. |
| 284 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 95 sqmm 3.5 core complete all as specified and directed by Engineer-in-charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 285 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 25sqmm 4 core complete all as specified and directed by Engineer-in-Charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 286 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 16sqmm 2 core complete all as specified and directed by Engineer-in-Charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 287 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 50sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 288 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 35sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 289 | Supply, laying and testing of extruded XLPE insulated screened, PVC bedded galvanized steel strip or wirearmoured electric power cables (heavy duty) with aluminium conductor1100 volts grade, cross sectional area 120sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge. (Notes:- Excavation earth work sand cushioning & PCC covers shall be measured and paid separately) |
| 290 | Supply, jointing and connecting cable and termination jointing kit, (out door), heat shrinkable type for underground cable including jointing kits and labour complete for making joints suitable for aluminium conductor cable of size 50 sqmm to 120Sqmm 3.5core, 1100 volts grade cable complete all as specified and as directed by Engineer-in-Charge. Note:- Excavation, earthwork, sand cusioning , cable cover etc shall be measured and paid separately |
| 291 | Supply, Installation, Testing and commissioning of LT panel cubical, Outdoor type, slopy canopy at top, (Factory made of similar CPRI type tested panel),having protection IP-54 and conforming to IS-8623, dust and vermin & weather proof, fabricated to outer shell 3.15 mm thick and inner shell made out of 2.00 mm CRCA sheet, suitable for 415 Volt 3 phase 4 wiredouble door front/rear opening and locking arrangement with hinge door for each compartment with back door common openable (screwed) , floor mounted bus bar chamber (enclosed) and prewired with Aluminiumbus bar of capacity 1.5 time of cap of MCCB / PVC insulated sheathed stranded copper conductor cable duly mounted with frame made out of50mmx50mmx6mm angle iron at vertical corners & base of panel board floor mountedon PCC blocks (1:2:4) type B1 (using 20mm graded crushed stone aggerated)as U shape complete with grouted bolts, nuts and washers complete with including painting with two coats of epoxy powder paint over a coat of primer after under going a rigreous metal treatment process involving alkaline degressing ,descaling in dilute sulphuric acid or any other acid and phosphateallcomplete in all respect for main Panel for including provision of the following :-(a) MCCB 415 volts .4P ,400 Amps 36 KA (incoming)-01 No. (b) MCCB 415 volts .4P, 250 Amps 25 KA(O/G)-01 Nos. (c) Spare space for MCCB-01 Nos. (d) Bus bar chamber with and including Aluminium strips (set 4 nos) suitable for 600 ampsduly mounted on porcelain insulators-01 Set. (e) DigitalAmp meter 3 phaseprogrammebale type with suitable CT"s 500 Amp 01Set.(f) Digitalvolt meter 3 phase programmebale type suitable for 500 Volt -01 Set. Note : All type test certificate and design varification with switch gear (ACB/MCCB) as per conforming to IS 61439 /2011 from CPRI approved sheet as submitted by Contractor. |
| 292 | Supply, Installation, Testing and commissioning of LT panel cubical, Outdoor type, slopy canopy at top, (Factory made of similar CPRI type tested panel),having protection IP-54 and conforming to IS-8623, dust and vermin & weather proof, fabricated to outer shell 3.15 mm thick and inner shell made out of 2.00 mm CRCA sheet, suitable for 415 Volt 3 phase 4 wiredouble door front/rear opening and locking arrangement with hinge door for each compartment with back door common openable (screwed) , floor mounted bus bar chamber (enclosed) and prewired with Aluminium bus bar of capacity 1.5 time of MCCB / PVC insulated sheathed stranded copper conductor cable duly mounted with frame made out of50mmx50mmx6 mm angle iron at vertical corners & base of panel board floor mountedon PCC blocks (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as U shape complete with grouted bolts, nuts and washers complete with including painting with two coats of epoxy powder paint over a coat of primer after under going a rigreous metal treatment process involving alkaline degressing ,descaling in dilute sulphuric acid or any other acid and phosphateallcomplete in all respect for feeder piller and including provision of the following :-(a) MCCB 4 pole 415 V 3 phase 250 Amps (Thermal Adjustable) 16KA (incoming)-01 No. (b) MCCB 415 volts .4P, 100Amps 16 KA(O/G)-03 Nos. (c) Onload change Over 100 Amps -01 Nos .(d) Bus bar chamber with and including Aluminium strips (set 4 nos) suitable for 400 ampsduly mounted on porcelain insulators-01 Set. (e) Digital voltmeter 0-500 V and digital Ammeter 0- 100 A with selector switch. (f) LED Phase indicator R, Y & B-01 Set Note : All type test certificate and design varification with switch gear (ACB/MCCB) as per confriming to IS 61439 /2011 from CPRI approved sheet submitted by Contractor. Less schedule of credit of old materials.Less on SSR items rate @-16% |
| 293 | Note: The schedule of credit in Pdf format has been attached with tender and amount of credit schedule i.e. Rs 5,82,861.00 shall be deducted from the total quoted amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
