Public Works Department-PWD has published Tender For Civil Work. Submission Date for this Tender is 09-02-2024. Shed Construction Tenders in Thiruvallur Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling clearing away and carefully stacking materials useful for reuse of any thickness of AC Sheet roofing withot roof timbers. |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse of any thickness of Plain Cement Concrete. |
| 3 | Dismantling clearing away and carefully stacking materials useful for reuse of any thickness of Brick / stone masonry in Cement mortar walls under 3m high |
| 4 | Relaying of Cement concrete 1:5:10 (one cement five sand and ten hard broken stone) using 40mm size / ISS hard granite broken stone jelly for foundation and floooring including dewatering if found necessary and laid in layers of notmore than 15cm thickcomplete complying with standard specification and as directed by the departmental officers. |
| 5 | Reconstruction of Brick work in cement mortar 1:5 (One cement and five sand) using using best quality II class Ground moulded chamber burnt bricks of size 9" x 43/8"x 2 3/4"in for foundation andbasement and super structure,complying withstandard specification including curingetc complete as directed by the departmental officers. |
| 6 | In Ground Floor |
| 7 | Replastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Repaving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 9 | Relaying the granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) 25mm thickness |
| 10 | Renewing and installation of steel chalk writing board made by AALIANCE N.V.EUROPE, belgium, on steel core the long lasting porcelain is fused at temperatures up to 800 C. with this process a scratch and stain resistant surface is created and becomes smooth and erasing free of "Ghost lines"virtually maintence free, this chalk board never acquires."chalking in" and total cleaning is accomplished with clear water the writig surface will not crack peel, even when solvents are used to remove crayon,paint or other forign substances.Highly versatile, the entire writing area can become a display board with the help of magnetic buttons.under ordinary circumstances writing surface will not break lilke glass boards, so durability can be assured. etc complete. |
| 11 | Repainting two coats of old plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 12 | Repainting two coats of old plastered wall surface with ready mixed plastic exterior emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 13 | Repainting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of best approved first quality and colour in all floors etc., including cost of scrapping charges complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works). |
| 14 | Reroofing with best quality prelaminated galvanisediron powder coated sheet of 0.47m thick of approved colour design and quality including cost of self tapping screws between washerand cutting the sheet to required slop if found necessary during execution of workhave charges for machine etc.,complete. As per approved rate. |
| 15 | SUB TOTAL |
| 16 | GST @ 18 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
