Military Engineer Services-MES has published Tender For Special Repair To Bldg No Op T 498 Cfta Additional/Alternator Of Kitchen In Bldg No P 01 Soi Under Age Br Ii At Rms. Submission Date for this Tender is 06-03-2024. Building Work Tenders in Shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Feb-2024 | AMENDMENT IN BOQ FOR SPL REPAIR TO BLDG NO OP T 498 CFTA ADDN ALT OF KITCHEN IN BLDG NO P 01 SOI UNDER AGE BR II AT RMS | BOQ | 21-02-2024 |
| 2 | 21-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-02-2024 |
| 3 | 28-Feb-2024 | AMENDMENT IN DATES 1 FOR SPL REPAIR TO BLDG NO OP T 498 CFTA ADDN ALT OF KITCHEN IN BLDG NO P 01 SOI UNDER AGE BR II AT RMS | Date | 06-03-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling ofWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 2 | M&L for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions on 18mm thick calibrated plywood of , grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed. |
| 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM (1:4) including grinding andpolishing complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L Granite (of any type) tiles 20mm thick machine cut, as in skirting/dadoes, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in vertical surfaces over 20mm thick screed bed in CM (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for Non - skid Ceramic tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm screed bed or bedding layer in 1:4 CM complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for Glazed Ceramic tiles in vertical surface 450x 350x 10m thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm screed bed or bedding layer in 1:3 CM complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&F Carysill or equivelent faucets swan neck 15 mm dia screwed for iron pipe or for brass ferrule & fixedin repair complete all as specified & directed. |
| 10 | S&F in repairsinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with waste coupling and waste pipes of suitable capacity all as specified and as directed by Engr-in-Charge Make- Carysill or equivalents |
| 11 | M&L for Stainless steel dustbin of 10 Ltr or more capacity complete all as specified and as directed. |
| 12 | S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre |
| 13 | Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified |
| 14 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions |
| 15 | Ditto-but to curved surface |
| 16 | Extra over itemabove for any sunk or curved moulding |
| 17 | M&L for preparation of ceiling surfaces and applying two coat of oil bound distemper over a coat of primer |
| 18 | Modular Kitchen (INOX ACCESSORIES ) |
| 19 | S&F PVC Cutleri 600, complete all as specifed and directed by Engr-in-Charge |
| 20 | S&F pullout 300mm, stainless steel complete all as specifed and directed by Engr-in-Charge |
| 21 | S&F SATIN PENTRI , 450mm stainless steel, 12 Basket and in 6 layers complete all as specifed and directed by Engr-in-Charge |
| 22 | S&F for Lift Up Hydrolic gas spring 100N (10kg load capacity) complete all as specified and as directed. |
| 23 | S&F for PVC Legs and Skiring (4 inch) complete all as specified and as directed |
| 24 | S&F Sauccer racks stainless steel,complete all as specifed and directed by Engr-in-Charge |
| 25 | S&F Thali racks stainless steel,complete all as specifed and directed by Engr-in-Charge |
| 26 | S&F for Gola profile, Aluminium Handles for doors of Kitchen Cabinets,complete all as specified and as directed. |
| 27 | S&F Detergent Rack, stainless steel,complete all as specifed and directed by Engr-in-Charge |
| 28 | S&F for Gas pump Hydrolic gas spring(35kg load capacity) complete all as specified and as directed. |
| 29 | S&F for inner drawer / partition for drawer complete all as specified and as directed. |
| 30 | S&F for EZ Up and Down 600mm, Stainless Steel including left up of suitable capacity, butterfly hinges, ss screws and all other fitting and fixtures complete all as specified and as directed. |
| 31 | S&F for Magic Corner, Stainless Steel includingfitting and fixtures complete all as specified and as directed. |
| 32 | S&F for butterfly hinges, Stainless Steelcomplete all as specified and as directed. |
| 33 | S&F for Channel 500mm EDS Standard , Stainless Steelcomplete all as specified and as directed. |
| 34 | S&F for High Rails , 250mm telescopic ball bearing drawer chaneels, Stainless steel 500mm longcomplete all as specified and as directed. |
| 35 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings |
| 36 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 37 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 38 | Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. |
| 39 | Taking down Chowkhats or frames not exc. 1.5 sq. m each Ditto but with shutters (without taking off shutters from the frames) |
| 40 | M & L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete complete . |
| 41 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etccompleteall as specified and as directed. |
| 42 | M&L for Brushing neat cement slurrywith 3.0 Kg of cement per Sq meter. |
| 43 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred /stopped endsetc complete all as specified and directed. |
| 44 | M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete |
| 45 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and as directed. |
| 46 | M&L for mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 47 | S&F 0.71 mm thickplain aluminium sheeting , alloy 31000 H4 in ridges, hips , valley gutter , drip and straight flashing . |
| 48 | S&F Pressed steel frames 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified |
| 49 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded |
| 50 | S&F Anodised aluminium Window or ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 51 | S&F Expanded metal exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanished steel staples supplied and fixed complete to wood or steel members |
| 52 | S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each |
| 53 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. |
| 54 | Supply and fixing 100mm size stainless steel butt hinges,medium weight, hot rolled complete all as specified and as directed. |
| 55 | Supply and fixing 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed. |
| 56 | S & F Aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed. |
| 57 | Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 58 | Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 59 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified . |
| 60 | S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 61 | S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc |
| 62 | M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement all as specified & directed |
| 63 | Materials and labour for 15 mm thick rendering on brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cement complete all as specified and as directed. |
| 64 | M&L preparation of newly plastered surfaces of walls & applying two coats of cement base paintover a coat of alkali resistant primer complete all as specified. |
| 65 | M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed. |
| 66 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 67 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 68 | Writing letters or figures with synthetic enamel paint (Block, Roman, Italic or Indian) not exceeding 30cm high over old painted surfacescomplete all as specified and as directed |
| 69 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. |
| 70 | M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) |
| 71 | M&L for flooring for badminton court mats of fitflextype , total thickness 8.5mm incl clearing of surface,line marking,installing & consisting of specifications as per the standarad of international auth of sports like ITF and fixed all as per manufactures instructions specified directed by Engineer-in- Charge. |
| 72 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening. |
| 73 | S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site. |
| 74 | S&F in repair 15mm bore long bodybib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule. |
| 75 | S&F in repair 15mm diapillar tap cast copper alloy chromium plated fancy type(ISI Marked) |
| 76 | S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes. |
| 77 | S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes. |
| 78 | S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair. |
| 79 | S&F in repair CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair |
| 80 | S&F brass CP shower rose 100mm size with swivel joint fixed in repairs. |
| 81 | S&F in repair PVC low level flushing cistern of 10 ltrs capacity incl flush pipe complete fixed in repairs. |
| 82 | M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. |
| 83 | S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, andcover and mild steel chromium plated or aluminised hinging device. |
| 84 | S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs. |
| 85 | S&F in repair PVC connection pipe 15mm bore 450mm long. |
| 86 | S&F waste pipe 750 long for WHB or sink in repairs. |
| 87 | S&F in repair vitreous china white wash hand basin flat back size 550x400mm. |
| 88 | S & F in repairs 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 89 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 90 | S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair,complete all as specified and directed. |
| 91 | Demolition of cement concrete (unreinforced) of any description and in any position including taking out water closet Indian type/ EWC and removal of lime concrete bed, "P" or "S" trap and cleaning the sunken portion complete all asdirected. |
| 92 | Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 20mm thick screed bedin CM (1:4) complete all as specified and as directed. |
| 93 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. |
| 94 | Dismantling cast iron work of any description |
| 95 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls as specified |
| 96 | All as per item No 60 hereinbefore above but bore of pipe 75 mm dia fixed to walls & floors. |
| 97 | S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door in repair |
| 98 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore in repair |
| 99 | S & F 110 mm dia PVC (SWR) vent cowl in repair complete all specified and as directed. |
| 100 | Re-fixing only 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls after cleaning the old pipe all as specified and directed. |
| 101 | All as per item No 84 hereinbefore above but bore of pipe 75 mm dia fixed to walls & floors. |
| 102 | M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity. |
| 103 | S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . |
| 104 | S&F PVC (SWR) bends 110mm bore of any radius with access in repairs. |
| 105 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/conduit including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at sitecomplete all as specified and as directed. Make:- Richa/Havells/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa |
| 106 | (a) Onelight pointcontrolled by one, one way switch . |
| 107 | (b) One Ceiling fan/ exhaust fan point controlled by one, one wayswitch. |
| 108 | (c) One 3 pin socket outlet 5 Amps on the Independent board. |
| 109 | All as per item No-89 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make : Richa/Finolex/RR Kabel, Make of Caping & Casing : Prestoplast /Richa /Supreme |
| 110 | Supply & fitting of wall mount stainless steel BaffleT- Shapped kitchen chimney of Brand : Faber model : Hood ALPH HC PB BK 90 with air suction capacity of 1100 CMH, with the following accessories :- (i) Width : 90cm (ii) Suction power : 1100m/hr (iii) Function type : Autoclean (iv) Filter Type : Filter less (v) Finish : Black matte + glass finish loaded with premium features. (vi) Control : Soft push Button (vii) Led : 2x2W LED (viii) Product Dimension (WXDXH) (mm) : 915 x580 x505 mm (ix) Warranty : 5 years on motor and 1 year comprehensive |
| 111 | Material & labour for Concealing of wall including wall plaster, paint, labour cost, civil cost that includes fixing the Exhaust fan Hole including making good to the disturbed surface of existing Exhaust fan hole etc complete all as specified and as directed. Note : Old Exhaust fan deposited to MES store yard. |
| 112 | Material and labourfor Supply and fitting 12mm thick prelaminated Board with Decorative Choice Laminates of colour that match with the Chimney colour complete all as specified and directed by Engr in Charge. |
| 113 | M&L for Switch piano flush type single pole, one way 6A. Make :Anchor/Legrand/Kinjal |
| 114 | M&L for Switch Socket combination, 2 in 1, 3 pin 6A flush type. Make :Anchor/Legrand/Kinjal |
| 115 | M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type. Make :Anchor/Legrand/Kinjal |
| 116 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. |
| 117 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed by Engr in Charge. |
| 118 | M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn throughand including PVC double locked Casing & caping incl taking down old unsv complete all as specified and as directed.Make : Finolex/Havells/RR Kabel, Make of Caping & Casing : Prestoplast/Finolex/Supreme |
| 119 | M&L for 20 W LED, 4", Wall mounted LED tube light fitting batten with LED single side or double side connection, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same onand including two Nos PVC blocks and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fittingcomplete all as specified and as directed. |
| 120 | M&L for decorative pandant, surface mounting,20w, dome shaped pedant in black finish dome shape reflector for glare free light including 18 watt LED lampwith B-22 basecomplete all as specified and directed. |
| 121 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 607711 or equivalent in ABB/Siemens |
| 122 | M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens |
| 123 | Supply and fixing MCB SPN 32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning. complete all as specified and as directed. Make: Legrand Cat No 408636 or equivalent in ABB/Siemens. |
| 124 | Supply and fixing MCB SP 5- 32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with onnection testing and commissioning. complete all as specified and as directed. Make: Legrand Cat No 408636 or equivalent in ABB/Siemens. |
| 125 | Material and labour in replacement of unsv HPSV/MH light fittingswith LED energy saving, environmental friendly, LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp suitable for high mast/tower lights as application including openign and fixing of nuts, bolts and washers on existing high mast/tower/wkspstructure properly complete all as specified and as directed. Make : Havells cat part No JETAIRISALPHAFL200WLED857PBOLTG/Bajaj/Crompton Crompton/Wipro/Bajaj. |
| 126 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Conduit pipe andCasing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 127 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Conduit pipe and Casing & caping including complete all as specified and as directed. NOTE:- two runs of 2.5 Sq mm + one run of 2.5 sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 128 | Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge. Make:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips |
| 129 | Supply and laying or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed 16 sq mm2 core stranded conductor nominal cross sectional including disconnection/taking out old unserviceable existing cable all as specified. Make: Richa/Polycab/Gloster. |
| 130 | Excavation in trenches, not exceeding 1.5 m wide and n. exc 1.5 m in depth for laying of cable for soft/ loose soil and getting out all as specified. |
| 131 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm apart for soft/loose soil all as specified. |
| 132 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point. |
| 133 | M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose |
| 134 | M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable all as specified and directed. |
| 135 | Supply & laying tubes " light grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 136 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI frame with CI coverfunnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
