New Mangalore Port Trust-NMPT has published Tender For Providing Lighting Arrangements To The Ground And Assembly Point At Cisf Barrack. Submission Date for this Tender is 24-02-2024. Barrack Tenders in mangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying of 1.1KV LT UG cable XLPEinsulated, PVC extruded inner sheath armoured UG LT cable as perIS-7098 Part-1, having aluminiumconductorgalvanized, steel wire/ tape armoured cable with PVC outer sheathing 1.1 KV class. (As per Technical Specification) a) 4C x 10 sqmm |
| 2 | Supplying of 1.1KV LT UG cable XLPEinsulated, PVC extruded inner sheath armoured UG LT cable as perIS-7098 Part-1, having aluminiumconductorgalvanized, steel wire/ tape armoured cable with PVC outer sheathing 1.1 KV class. (As per Technical Specification) a) 3.5 x 25 sqmm |
| 3 | Earth excavation for cable trench 0.5mtr width and depth 0.6 mtr, refilling the cable trench and consolidating and depositing of surplus earth with a lead of 200mtrs etc. complete. a) In hard soil |
| 4 | Labour charges for laying of 1.1KV class ug cable in existing trench/hume pipe/on wall as required. a) 4C x 10 sqmm |
| 5 | Labour charges for laying of 1.1KV class ug cable in existing trench/hume pipe/on wall as required. a) 3.5C x 25 sqmm |
| 6 | Supplying and fixing of PVC heavy gauge pipe of size 2” dia with bends, couplings and accessories complete. |
| 7 | Fabrication, supplying and erection of 8 mtr long hot dip Galvanized Octagonal hot dip pole with BSEN 10025 grade S355 JO steel plate for shaft, IS2062 for base plate with door arrangements, including suitable boards, Bakelite sheet, heavy terminals and 2 nos 6A DP MCBs as per IS specificationssuitable to withstand the wind speed of 47 m/s for 8m pole in single section and single joint welded as per IS9595/IS10178aws having dimensions bottom 135mm, top 70mm with 3mm thick, suitable base plateand 4 nos. of M20x750mm long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc. (As per Technical Specification) |
| 8 | Supplying and fixing of hot dip GalvanizedM.S. bracketsuitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc. complete. a) Single Arm bracket with 1000 mm standard 40mm dia. |
| 9 | Providing foundation for 8 mtrs Octagonal polewith excavation and making of RCC foundation using M20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. |
| 10 | Supply of 150 W LED floodlight luminare with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glareclear diffuser with injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with bracket of outer dia of 40mm to 50mm.Universal Volatge driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site locationwith minimized minimal tools. LED Light fixture with 150 W System Power consumption. LED fitting Efficiency> 130 lum/w, nominal CRI>75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die Cast housing / Body part. Warranty of 2 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. (As per Technical Specification) |
| 11 | Fixing of LED floodlight fittings over existing pole including clamps, bolts, nuts and wiring complete. |
| 12 | Supplying, fixing and wiring earth electrode for grounding feeder pillar using 40mm dia, 2.90mm thick GI pipe 2.5 mtr long with GI funnel with mesh and suitable size reducer fixed on the top of electrode. The funnel should be enclosed in a cc chamber of 400 x 400 x 400mm with a cast iron cover.the earth electrode shallhave staggered holes of 12mm dia and the electrode should be covered 150mmalround with alternate layers of salt and charcoal from the bottom of the CC chamber. |
| 13 | Supplying and laying of 3C x 2.5 sqmm PVC insulation, sheathed flexible multi core copper cable from marshalling box to the fittings. |
| 14 | Supplying and fixing of 25watt LED Post Top lantern fitting with suitable arrangement for fixing of fitting to the pillar of the Gate etc. complete. |
| 15 | Supply and installation of outdoor type Thermoplastic modular panel enclosurewith transparent polycarbonate lid, shock proof, water proof IP65 having internally embedded gasket on both lid and flap with suitable hinged flapfor operating andwiring with 16/10sqmm copper wire, termination of wire with lugs, SS bolts, nuts andconsisting of following components.1. 600 x 600 x 170 mm –1no. 2. 40A TPN MCB – 4 nos 3. 25x3mm Copper Bus bar – 1mtr 4. ElmexCBT 110 connectors—16 nos. |
| 16 | Supplying and fixing of single door 8way SPN Distribution board with wood board. |
| 17 | Supplying and fixing of 32A TPN MCB |
| 18 | Supplying and running of 25x3mm GI strip for grounding connections using necessary fixing materials. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
